How to draw an ordinary space background with ordinary watercolor. How to draw space with a pencil step by step

Today I will tell you how to draw space with watercolors.
You will need: watercolor paper, white acrylic paint, a wide natural brush, a toothbrush, a tablet, electrical tape or masking tape.
A small note before starting. I am not a professional artist, and not an artist at all. Therefore, I focus on my own personal experience, and not how it should be according to science.

Space drawing paper in watercolor

For this technique I use watercolor paper. It is better than usual because it absorbs water and does not deform so much. Plain paper goes in waves, water and paint just flow off it. Watercolor paper dries quickly, while regular paper takes a long time to dry. I have a watercolor tablet from Greenwech Line. This is basically cheap and simple paper, but it suits me for work. In art and stationery stores you can buy paper by the piece. This is not such a rare item.
Let's prepare the sheet. In general, always when working with watercolor, the paper must be well fixed. I use a piece of plywood for these purposes, but any board, any tablet that you don’t mind ruining, will do. On the plywood, I glue the paper around the perimeter with electrical tape.

Space drawing watercolor

Any watercolor will work for this work. I will be using my old honey watercolor palette which is over 10 years old. The brush here is larger to quickly cover the entire surface of the sheet. It is better to work with watercolors with natural brushes, because they can pick up paint and water more.

Space watercolor in stages for beginners

First stage
First, wet the paper pointwise so that the paint spreads better on the sheet. We start adding light in small spots. We apply the paint, as it were, also dotted. Do not try, as they say, to paint the wall. We need these colored areas to be non-uniform. I mainly use purple and blue colors. And in some places I add emerald and green spots. Spare no water. The more it is, the better the colors will mix with each other, the less clean paper we will have. Therefore, before picking up a new color, I dip the brush into a cup. When there is enough color, leave to dry. You can dry the sheet with a regular hair dryer. Firstly, it will be faster, and secondly, all the waves on the sheet are smoothed out, and I just need the sheets as evenly as possible. Make sure the paper is completely dry, otherwise we'll just wash the paint off with the second coat.
Second phase
Now you can proceed to the second stage. For this we need only black watercolor. We collect more water and more paint and boldly block the entire sheet. So far, it looks like a creepy daub, but don't worry. We wait again until the layer dries. I will turn to the hair dryer again. As it dries, other colors will begin to show through the black layer. I got a lot of gaps where there is no paint at all. In those places I added a couple of colored spots. Check again if the paper is still damp somewhere.
Third stage
And we move on to the most interesting third stage. But it also needs to be thoroughly prepared. To close the workspace, you need to make a protective screen out of paper. I use old paper for this. Bend a square sheet of drawing paper in half. Then again. Expand it completely and cut along one of the lines obtained to the center of the square. Bend the sheet so that you get, as it were, a room, three intersecting planes. We need two of these screens to completely cover the desktop. In general, in a good way, it is also necessary to close the top, but this is usually enough for me. Put the tablet inside the screen. Take an old toothbrush and white acrylic paint. Dip the bristles into the paint and start splattering the paint onto the sheet. To make the spray fly in the right direction, slide your finger along the brush towards you, otherwise all the paint will fly at you and splatter everything around. The closer you hold the brush to the leaf, the tighter the stars will be. Change the height constantly to get a more interesting view. I had a lot of paint left on my hands and so that it would not disappear, I added it to the sheet with my fingertips. And our picture of space is ready. Unfasten it from the work surface.
In principle, there are other ways to image the galaxy, but in my opinion this is the easiest and fastest. On one sheet it took me 10 minutes, no more. I used this technique when I made a congratulatory set on a space theme. There I was dominated by the green color and I did not stint on the spray. Each time you get a completely different picture of the cosmos. If you want as similar images as possible, do several at the same time and apply spots in the same places. This will be even faster.
That's all. I hope you enjoyed today's tutorial. All successful creativity!

Space is an incredibly rich topic for creativity. Each artist can find his own plot and create his own "cosmic" picture: a boundless universe with distant stars and planets, an unusual space landscape or a flying rocket, a scientific satellite. For work it is better to use paints, the drawings are more interesting and bright.

How to draw a space picture

To remember how to draw space with paints, a few simple rules will help:

1. plot and composition. It is important to think in advance what will be depicted in the picture: the unknown universe, mysterious stars, alien planets, bright comets, spaceships. You should also decide on the location of the main objects. You can use ready-made photographs or pictures, put them side by side and draw.
2. Materials. The paper should be thick, it is better to use watercolor. Paints can be taken any, but it is necessary to take into account their features. Oil - bright, persistent in color, but dry for a long time. Acrylic - become glossy after drying, but dry quickly. Gouache is easy to use, but the colors tend to fade after drying, so it is advisable to revive them with bright outlines, wax and other things. Watercolor - requires preliminary wetting of the sheet with water, the tones are soft, translucent. Brushes need to be selected in accordance with the paints, of different sizes, from large for the background to small for drawing the smallest stars or the relief of planets. Materials must be prepared in advance so as not to break away in the process of work.
3. Sketch. It is better for a novice artist to first make a sketch with a simple pencil, and then move on to paints. You do not need to draw small details, it is enough to outline the location of the main objects, their shape, number.
4. Painting. As a rule, the background is drawn first. Do not use black. The cosmic palette is much richer. Violet, blue and their dark, deep shades will do. When the background dries, you can move on to the main objects. When working with oil, it is not necessary to wait for complete drying. Do not make clear boundaries and contours. It is better to alternate sharp and blurry details, giving preference to the latter. Planets should be lighter than the background by several tones, comets and stars should be bright, you can use shades of red and yellow. At the end, add details, light spots, flashes, glare. To do this, you need paints of bright and light colors, primarily shades of yellow and white. For showiness, you can use paints with mother-of-pearl or sparkles, gold and silver contours.

It is more convenient and easier for a novice artist to draw in stages. For the first pictures, it is better to choose simple plots. It is worth practicing in drawing individual objects. If they succeed, then you can move on to full-fledged paintings.

Comet

The comet is a decoration of the picture, a bright accent. The drawing begins with a sketch. It is necessary to depict the comet schematically: the head is a circle, the tail is a straight line.

Draw the head of the comet, mark the beginning of the tail with a bright flash.

Add the middle part of the tail. Show flames.

Finish the tail.

A comet can have a straight tail or a curved one.

Brightly and clearly depict the head of a comet. For this, white, light yellow and light blue colors are used. The tail is drawn more blurry. The further away from the head, the more diffuse and transparent the tail fan will be.

Rocket

The picture can depict a spaceship, terrestrial or alien, a satellite or a large station.

It is enough to apply imagination to create a more complex ship based on a simple children's rocket.

Planet

You can draw your native Earth, Saturn or Jupiter, or turn to unknown planets. Turning to paints, one should remember about chiaroscuro. One side of the planet should be lighter.

Stars

The main objects of the cosmic picture are the stars. They can be small dots scattered across a sheet of paper, large bright spots with divergent rays.

The distribution of stars should be uneven. Large clusters are accompanied by an image of haze, nebula.

In order to achieve this effect, you need to dip a sponge or a piece of cotton wool into the paint and lightly blot the finished drawing. You can also take a large brush or toothbrush, dip it into the paint and, by running your finger over the bristles, splatter the design. Large and small drops will settle on a sheet of paper, and you will get a starry sky.

simple drawing

Having mastered the principles of depicting the main objects, it is recommended to move on to the big picture. The photo shows how to draw space with paints in stages.

It is necessary to take a sheet of paper, lay it horizontally, place covers on top - future planets.

Circle the stencils with a pencil.

Put a small bottle or bottle on the sheet, such as a corrector.

Circle the stencil of the future rocket.

Sharpen the nose of the rocket, draw a porthole.

Add details, supports, flames.

You can start painting with watercolors. First, the background. Paint is best applied from the edges to the center. Take a large brush and paint a purple stripe, then a green one.

Add lilac, blue and pink colors.

Then use blue. Circle the planets in purple and green, blue and pink. Add yellow or green in the center.

The background is ready, you can move on to the planets. The choice of color depends on the taste of the artist, but you should not take background tones, contrasting ones are better.

Circle one of the planets in orange, draw a few spots inside the outline. Add blue and green.

Color the second planet green, blue and yellow. The third is scarlet and brown. If desired, you can highlight the contours of the planets in purple or dark green.

The last object is a rocket. Take a small brush. Cover the hull with silver paint, the nose and supports with red. Porthole - lilac. Outline the outlines in black or purple. Draw fire in yellow, orange and red.

Revive the drawing. Add a violet color along the outline of the fire and one planet. Circle other planets in red and yellow. The lines should not be solid, but jerky.

Let the paints dry, close the objects with stencils.

The last step is the stars. Take a large brush or toothbrush, dip it in white gouache, diluted to a liquid state, and spray the paint by running your finger over the bristles.

The drawing is ready.

space landscape

First you need to make a sketch, outline the position of the planet, mountains.

Draw a relief, schematically designate people.

Drawing on the theme "Space" is an endless field for creative experiments. Depicting the Universe "on canvas", a small or adult artist makes individual decisions: what paper to use, what colors to give preference to, how to arrange the composition and how to supplement it. Depending on the choice of materials and execution technique, the drawing can be brighter or less pronounced, rich in details or concise and abstract. Space with planets, stars and a satellite, drawn in pencil or gouache, cannot be compared with watercolor in terms of realism. And a small galaxy created with an acrylic paint sponge will be the greatest pride of a novice artist or a talented child. And if you have never had to engage in such creativity before, do not worry. We will tell and show how to draw space in step-by-step master classes with photos and videos.

Drawings with colored pencils or paints on the theme "Space" - a step-by-step master class for children

Children's drawings with paints or pencils on the theme "Space" are a great way of self-realization for the little ones. Depicting the cosmic abyss, colorful planets and fiery comets, children show their imagination, discover new talents in themselves, and show their individuality. And if several different techniques are used in the illustration master class, the process immediately becomes much more interesting, entertaining and informative.

Necessary materials for a children's drawing with a pencil and paints on the theme "Space"

• thick white paper
• black drawing paper
• compasses (or round objects of different diameters - lids, saucers, glasses)
• pencil
• gouache paints (including white)
• brushes of different thicknesses
• stationery scissors
• PVA glue

A step-by-step master class for children on creating a bright drawing on the theme "Space"

1. Place a thick white sheet on your work surface. Using round objects of different diameters and an ordinary pencil, draw nine circles on paper.
2. Depending on the diameter, the circle will be one or another planet. For example, the largest figure is Jupiter, and the smallest is Mercury.
   
3. Using gouache paints, apply characteristic colors to the circles. You can peep in the children's encyclopedia the real color of the planets, or you can create unusual fantasy planets to your taste.
   
4. When the paint is completely dry, cut out the resulting shapes with sharp scissors along the contour.
   
5. On a black drawing paper (you can use a half), leave splashes of white gouache paint. To do this, take some gouache on the brush and wave it several times over the paper.
6. Plan the location of your planets "in space". Lay them out neatly on paper and take a closer look. If you like the compositions, proceed to the next step.
   
7. Using clerical glue or PVA, secure all the elements in place.
8. Press each planet firmly with the palm of your hand or a thick textbook to ensure the pieces stick firmly. Do not overdo it with glue so that excess mass does not flow out to the sides. On a black background, the spots will be especially noticeable.
   
9. After the glue has completely dried, remove the textbook and evaluate the result. Drawing with colored pencils or paints on the theme "Space" according to a step-by-step master class for children is completely ready! Photo11

How to draw space in watercolor - an unusual idea for beginners

Using watercolor paints in creating a space drawing is much easier than it seems at first glance. On a wet basis, the colors self-blend into whimsical galactic patterns, realistically displaying wondrous nebulae and fine stardust. Even a child can cope with such a simple fine art technique. And for adults, we offer a complicated option for beginner artists - an unusual idea to paint the cosmos in watercolor in a geometric figure.

Necessary materials for drawing "Space" in watercolor for beginners

• sheet of thick white paper
• water and brushes of different sizes
• watercolor paints
• acrylic paints (black and white)
• salt
• ruler
• protractor
• sharpened pencil
• masking fluid for watercolor (Art Masking fluid)

How unusual to draw space in watercolor - step by step instructions

1. Take the “Pacific” as the basis for the image - a sign of peace and love. Using a template from the Internet, transfer the outline to thick white paper. You can also draw a picture yourself using a ruler and a compass.
   
2. To prevent watercolor stains from getting into forbidden areas, use a special masking agent. At the last stage of preparing the drawing, it is easy to remove it from the white area.
   
3. Fill in the sign with masking for watercolor, without going beyond the outlines. Wait for complete drying.
   
4. Thoroughly soak the areas between the axes of the sign with clean water. So the paint will form more realistic "space" stains.
   
5. On one of the wet areas, apply a drop of blue watercolor. Do not make too sharp strokes, let the paint spread on its own.
   
6. Add black watercolor or ink to the blue tones for a natural galaxy effect.
   
7. Thus, fill in all the free areas with colorful stains. When the watercolor dries a little, add a yellow glow and purple reflections.
   
8. Don't be afraid to speak on the white areas of the sign. At the end of the work, you can clean them up.
   
9. Sprinkle the still wet picture with coarse salt. Sprinkle the resulting space with small specks of white acrylic paint.
   
10. When the image is completely dry, outline the outlines of a marvelous space city with a pencil. Using a thin brush and white paint, draw all the lines.
    
11. In the final step, remove the thin watercolor masking film from the white areas of the sign. The contours will become smooth and clear, and the fields will become snow-white.
    
12. Now you know how to draw space in watercolor - an unusual idea for beginners will allow you to create a beautiful panel for your home or a bright postcard for a dear person with your own hands.Photo25

How to draw an ideal space with stars, satellites and planets with a sponge on homemade ceramics

Most often, space is painted with watercolors - quickly, conveniently, and practically. But what if you want to cover a household item that is completely unsuitable for watercolor with a fashionable galactic image? After all, ceramics, wood and other popular materials absorb watery paint, leaving only faded shades on the surface. In this case, it is better to use pigment ink or acrylic paints in a duet with a soft sponge or foam rubber sponge. So the image is successfully fixed and retains its brightness and clarity for a long time.

For information on how to quickly draw space with planets and stars with an acrylic sponge on ceramics, see our next master class with a photo.

Necessary materials for drawing "Space with stars and planets" on home ceramics

• old plain ceramic dishes
• acrylic paints
• spray with water
• sponges or sponges of different sizes
• synthetic brush
• Matt lacquer

How to draw space with stars on ceramics with a sponge and acrylic paints

Another interesting and original option is how to draw space with paints.

Watercolor images of space are good in their own right. They seem to be saturated with a special atmosphere of depth and mystery. But even such seemingly unusual drawings can be made even more entertaining. For example, by combining the space background with the city panorama. You will learn how to paint space for such an original and unusual option in our next step-by-step master class.

Necessary materials for the original drawing "Space" with paints

• thick landscape sheet or watercolor paper
• watercolor paints
• masking liquid for watercolor
• white acrylic paint
• medical alcohol
• salt
• pencil and ruler
• brushes of different thicknesses
• art adhesive tape
• black gel pen

How interesting and original to draw space with paints - step by step instructions

1. Draw a horizontal line across the bottom half of the sheet with a pencil. So you limit the area of ​​\u200b\u200bthe picture. From the line up, draw a few slender houses by hand. Don't worry about their symmetry. The more chaotic the structure, the more original the drawing will look.
   
2. Glue artistic adhesive tape under the line. It will serve as a color limiter.
   
3. Paint over the houses with white masking for watercolor. Wait for the liquid to dry.
   
4. Moisten the empty spots on the sheet with clean water. On the wet surface of the paper, dilute various shades of blue: from deep ink to sky blue.
   
5. Add additional colors to different tones of blue watercolor - lilac, pink, green, etc. The galaxy should turn out bright and more or less natural.
   
6. Sprinkle the wet pattern with table salt. As soon as the "space" dries, shake off the grains.
   
7. Using white acrylic paint and an art brush (you can use a toothbrush), leave small white drops on the picture - stars.
   
8. Place drops of alcohol in several places. The substance will slightly wash out the paint and give the image a more complete look.
   
9. Pry off the masking layer with an eraser and remove a thin film. Now the places for the houses are in perfect order.
   
10. With a black pen, draw windows and doors on the houses. Remove the art tape.
    
11. Such an interesting and original version of how to draw space with paints will appeal not only to children. Even adults will enjoy spending time in such an exciting creative process.
    

How to quickly draw and successfully use the drawing "Space" with gouache

In order to beautifully draw space with gouache and apply it in an original way in a home interior or as a souvenir, you need to make a blank yourself. To do this, you need thick paper and an ordinary wooden hoop. Gently holding a wet white sheet between the circles of the hoop, and then drying it with hair dryers, you will create an ideal field for "cosmic" creativity.

Necessary materials for drawing "Space" with gouache paints

• blank - hoop with paper
• gouache paints
• white cardboard cutouts (feather, polar bear, diamond, etc.)
• good photo
• white acrylic paint
• tinted or printed paper

Master class on the creation and original use of the gouache drawing "Cosmos"

After watching our step-by-step master classes with photos and videos, you learned how to draw space with a pencil, gouache, watercolor or a sponge with acrylic paints. Give the process a little more time, and your drawing on the theme of "Space" with planets, stars and a satellite will be ideal not only for children, but also for beginning artists.

In this lesson you will learn how to draw space and planet. .

Step 1.

First we will draw the starry sky. Create a new document and fill it with black. I set the size of the new document to 1600x1200 so that it can later be used as desktop wallpaper. Duplicate this layer (ctrl+ J) . Next, apply a noise filter to the new layer. Filter - Noise - Add Noise(Filter - Noise - Add Noise). Set the noise amount to 10%, Gaussian distribution, and check Monochrome.

Step 2

Next, go to the menu item Image > Adjustments > Brightness & Contrast(Image > Adjustment > Brightness/Contrast) and set the Brightness 30 and Contrast 75 . Now the noise is more like stars.

Step 3

Now let's add bigger stars. Duplicate the previous layer with stars (ctrl+ J) and change its brightness and contrast Image > Adjustments > Brightness & Contrast(Image > Adjustment > Brightness/Contrast) set the Brightness 100 a Contrast 50

Step 4

Click (Ctrl+T) and make the big stars layer about twice as big. Hold Shift to transform the layer proportionally. Click (Ctrl+L) to bring up the Levels window. Set the parameters as in the picture to increase the contrast. (In my case, I had to set the parameters opposite to those of the author 0 , 1.00 , 20)

Step 5

Set the blending mode for the layer to Screen (Lightening). To avoid the echo effect (overlay effect), press Ctrl + T and rotate the layer 90 degrees (while holding the Shift while rotating the layer, the layer will be rotated in 15 degree increments). Use this technique when rotating.

Step 6

Take a soft rubber band with a diameter of about 20-30 px and start erasing our stars on both layers. Try to create different shapes in all directions to make our stars look more natural. Also remember that there should be more black space than space with stars, and more small stars than big ones.

Step 7

Try to create some star regions with the tool Clone Stamp(Stamp) using a brush with soft edges. You have to decide for yourself where to place the clouds with stars, and where to leave empty space. Use your imagination and you will succeed.

Step 8

Let's add glow to the stars. Duplicate the big stars layer. Apply a filter Filter > Blur > Gaussian Blur(Filter - Blur - Gaussian Blur) with a Radius of approximately 10 px and change the Color Blending Mode to Linear Dodge(Linear Dodge). Press Ctrl+U and colorize the glow of the stars (I set Hue ( hue) by 230). Repeat this step a few times to make the starlight more expressive.

Step 9

And now let's create the rest of the details of our space landscape: huge stars, stardust and a multi-colored nebula. Create a new layer and set the blend mode for the layer Linear Dodge(Linear Dodge) and fill it with black. Further Filter - Render - Lens Flare ( Filter - Rendering - Highlight ) . I used a 35mm lens type. Create a couple more big stars in this way by changing the location of the center of the highlight and the brightness of the highlight. Use different colors for each of the stars, this will give some variety to the overall picture (the easiest way to do this is to press Ctrl+U and change Hue ( Color tone)).

Step 10

Create a new layer to create the stardust. Install opacity(layer opacity) to 25% and change the blend mode for the layer to Screen(Lightening). Select any brush with soft edges and set it up as shown. I used texture for the brush Confetti, this is one of Photoshop's standard textures. Now that we've set up our brush, let's paint our stardust in blue. (#ced0f1).

Step 11

And now let's create a multi-colored nebula. Create a new layer, take a soft round brush and paint a cloud like mine. It's quite easy: first draw the blue base, then the red area, and finally the yellow and white. Apply a filter to the nebula layer Filter - Blur - Gaussian blur(Filter - Blur - Gaussian Blur) with a radius of 50 px.

Step 12

Now let's give our nebula the shape of clouds. To do this, create a new black layer and apply a filter to the layer. Filter - Render - Clouds ( Filter - Rendering - Clouds). Change the blend mode for the layer to overlay(Overlap). After that duplicate the cloud layer (ctrl+ J) .

Step 13

Select the nebula layer and edit it opacity(layer opacity) to 55% and the blending mode for the layer to Screen(Lightening). Find the best place for your nebula and move it there.

Step 14

Well, we have finished drawing the starry sky. Now let's create a planet. Find a stone texture for your future planet. I used this one from SXC. http://www.sxc.hu/photo/1011795
You can also use your own texture.

Step 15

Open the texture image. Let's resize the canvas to give the texture a square shape. Image- canvas size ( Image - Canvas Size ) . Set the same values ​​for height and width. Use the tool Clone Stamp(Stamp) to fill in empty spaces with a texture. Also remove too dark spots with the same tool. Further Edit - Define Pattern(Editing - Define pattern). Save the pattern under any name you like. After that, you can close the image with the texture.

Step 16

Create a new document (ctrl+ N) size 1600x1600 pixels. Fill it with black. Using the tool Elliptical Marquee Tool ( Selection ”Oval area” ) create a circle selection. To make the circle even and fit into the square, press Shift + ctrl and without releasing these keys approximately from the center of the square, start drawing a selection. After you draw the selection, fill it with the pattern we created in the previous step. Image - Fill- Contents: Pattern
(Editing - Fill - Use: “Pattern”). And select the pattern we created for the fill.

Step 17

Apply the filter without deselecting Filter - Distort - Spherize ( Filter - Distort - Spherize ) Amount 100% ( Degree 100%. ctrl + F to repeat the last applied filter.

Step 18

Duplicate the planet layer (Ctrl + J) and fill the circle with light blue (#455571). This will be the atmosphere of the planet. You can use any other color for this.

Step 19

Duplicate this layer and fill it with black. This will be the shadow of the planet. Now select the atmosphere layer, double click on it to bring up the window Layer style (Layer style). Apply the following layer styles to the atmosphere layer:

Step 20

Move the shadow layer above the atmosphere layer ( ctrl +] - layer up )
(ctrl +[ - layer down ) . Apply a filter to the shadow layer Gaussian blur
(Filter - Blur - Gaussian Blur) Gaussian Blur (Filter - Blur - Gaussian Blur) with a radius of 75 px.

Step 21

Press Ctrl+T and transform the shadow: increase its size and move it a bit to the top left corner. I chose this position for the shadow because I'm going to place the planet in the top left corner of the picture and the light comes from the biggest star in the center.

Step 22

Select the atmosphere layer and set the layer blending mode Screen(Lightening), so we will see the surface of the planet. I don't like the brightness and contrast of the planet, so I reduced opacity( layer opacity ) up to 33%. After that I duplicated the planet surface layer and set the layer blending mode to soft light(Soft light). Also I changed opacity shadow layer by 90%.

Step 23

Now we need to copy our planet to the starry sky. For this
disable background(background) by clicking on the eye icon
responsible for the visibility of the layers. Shift+Ctrl+E to merge the visible layers. Now copy the planet onto the starry sky file and place it in the corner of the document. In the end, I added a glow to the planet.

Conclusion

That's actually all!!!
Good luck and patience in creating your space landscapes.

Congratulations to all on the greatest event in history! This morning, August 6, 2012 reached its goal and landed in the region of the Martian crater Gale - the Mars rover Curiosity!

Introduction: Where are we from and why are we the way we are? People never stop evolving. Human possibilities are getting better and better every day. Although the duration of our life is short, but with the help of modern technology, kids absorb new knowledge so quickly that it seems that a modern kid is a real scientist compared to people who lived two hundred years ago. Don't believe? I'll prove. At the moment, you, my dear readers, are near your monitor and, surfing the net, are looking for pencil drawing lessons, it is so? But in order to get them, you use a lot of knowledge and skills that were previously inaccessible to a simple person, for example:

1. Fast typing on the keyboard
2. Use of search engines
3. Use of key combinations, sets of codes, ciphers
4. Even for a simple VKontakte registration, knowledge of a certain algorithm will be required.

Are you still unsure? But today, at this particular moment, you have much more knowledge than advanced programmers 30 years ago! And you try to explain to your grandfather, who never used a computer, that it is possible to see Paris from a bird's eye view without leaving your home on Google Maps, or even cooler to take a virtual walk through the streets of the city. And this opportunity has become a common thing for us for a long time! I will return to my question. Who are we? Why can't kote know how to type on the keyboard, even though he lives with us? We are different. Maybe not even from this planet, not from this galaxy. Unsuccessful attempts to find out here on Earth no longer leave hope. Therefore, the most brainy people from our planet are trying so hard to explore the expanses of space. I'm sure the answer is there. Let's just wish them luck! Let's get back to drawing.

How to draw space with a pencil step by step

Step one. We draw a round shape for the planet and the outlines of the landscape.
Step two. Let's correct the contours of the planet and its satellite. In the foreground we draw two little men, these are astronauts sent to the moon.
Step three. Let's add strokes.
Step four. Let's draw a starry sky. Or, to be more precise, it is open space. In the middle of the lunar landscape we will draw several craters.
Step five. And it remains to add some shadows. As a result, we got such a picture of space:
I hope scientists will still be able to find life on this planet. And in the near future, we will fly to Mars not as scientific expeditions, but as if it were a vacation ticket, like Korben Dallas in the movie The Fifth Element. See the continuation of this lesson.