What paints, when mixed, give black. Making brown by mixing others

When decorating the surfaces of walls, furniture and other objects with paint, the question arises of mixing them to obtain the desired color. It is not always possible to find the desired color or shade in stores, so you can use the mixing table. Creating color by hand from improvised paints is also cost-effective.

Features when working with acrylic paints

Acrylic paints are inexpensive, easy to work with and dry relatively quickly. But the disadvantage is a narrow palette of colors, so you need to create the desired shade manually. You can get burgundy, purple, turquoise, sand, wenge, lilac, and others by mixing colors.

There are some rules when working with acrylic:

1. The surface to be painted must be smooth, clean, free of oil and grease. It must first be cleaned of the previous finish. It is not recommended to apply a new coat of paint on the old one;
2. Before painting, the walls must be leveled with putty, and then apply several layers of primer. The primer is used for better adhesion of paint and for less consumption;
3. Before use, acrylic must be diluted with water or special solvents, but it is better to do this in a separate container, with a portion of paint. This is necessary in order not to spoil the entire volume at once, but to use only as much as necessary.
4. After work, the used rollers and brushes must be rinsed well with water, otherwise they will become unsuitable for further work. You also need to wash other tools that have been used. The top of the paint bucket needs to be wiped down so that the lid can be opened in the future.
5. Most often, painting occurs in 2-3 stages, and for an effective result, you need to do it in one direction. To simplify and speed up the work, you can take a spray gun.

Important! Also, do not forget about the precautions, before work it is better to cover or seal all places and objects that will not be stained. You can work with the material at a temperature not lower than 5 degrees and not higher than 27 degrees.

Another main rule of application is to use paint first on a small area or a completely separate surface. When creating the desired shade, it is better to try it on a draft. You also need to wait until it dries completely, because after the color becomes a little darker or lighter, depending on the type of paint. And if the color matches the expected desired result, then you can start painting the surface or decorating objects.

What colors to buy

Tinting is the name of the science that studies mixing styles and getting the right shade. It is this science that helps to get lilac, as well as fuchsia, ivory, sea waves or seas when mixing colors. In theory, to create many colors, it is enough to have yellow, red and blue. But in this case, you can get a narrow spectrum.

To create a wide palette, it is enough to buy such colors:

• Red;
• Yellow;
• Brown;
• Pink;
• Blue;
• Black;
• White.

These colors are quite enough for applying the main scales. Gold, silver, mother-of-pearl and other additional colors are also used for decoration of drawings.

Mixing Features

You can find out how to mix and get the right shade by consulting with a specialist in the store when buying.

Tip: The main rule of mixing is that dry and liquid colors cannot be combined. They don't match.

There are 4 main colors - white, red, blue and green. With their help, you can get many others. For example, khaki can be obtained by mixing brown and green. And to get brown when mixed, you can from red and green. Beige - take brown and white.

Working with a table

Working with the table is to find the desired color and shade, and next to the line, the desired colors for mixing will be indicated. For example, you can get purple by mixing acrylic paints by mixing red and blue. And to make it light or dark, just add a little white or black color, respectively. The disadvantage of working from the table is that it does not indicate the amount of added pigment - the ratio. Therefore, when mixing, practice and color perception are needed.

Here you can simply take and mix colors first in the same proportion, and then add another for the desired shade. Or use specialized tables that have been developed by specialists for working with the material.

For example, to get an orange color when mixing acrylic paints, it is enough to mix red and yellow.

Acrylic Color Mixing Chart

Working with paints is easy, the only difficulty is creating the right shade, without proportions. But, if you understand the mixing table and practice, as well as know the rules for working with acrylic, you can create a unique and inimitable interior design with your own hands and relatively cheaply.

There are many reasons for looking for green. For example, you want to paint the kitchen, draw a landscape, or make leaves for a plant out of plasticine, but there is no way to buy the necessary material. Then you have to look for the answer to the question of how to get

Fundamentals of color

A science called coloristics studies colors, their features and combinations. Any artist, even a beginner, has an idea of ​​​​how to get one or another shade by mixing paints, and, of course, knows how to get a green color.

You may not believe it, but all the objects around you are painted in only 3 colors. They are called basic. These are red, yellow and blue. By mixing these colors and using black and white, you can create thousands of shades: brown, purple, pink, orange and many more. By learning these basics, future artists will also learn how to get green.

The color ring is used for a visual study of color. It is convenient to use it to determine which color to mix with which in order to get more complex shades. Moreover, changing the proportions of the original colors also changes the final one. Paints from different companies may vary slightly in color - this must also be taken into account when mixing.

What should be mixed?

We figured out that any color can be obtained by mixing red, blue and yellow. It remains only to figure out which colors to mix to get green. For the answer, let's turn to the color ring. It clearly shows that the color we need is between yellow and blue. So it is they who need to be mixed to get green. If you take paints in equal proportions, you get the usual color, which can be found in a jar labeled "green". But what happens if you change the amount of one of the colors?

Many shades

We have already talked about shades above, it remains to figure out what it is. Artists call colors that are very similar to the main one, but changed by adding other colors. Let's see how it looks in practice.

We have already figured out how to get green by mixing blue and yellow in equal proportions. If the proportions change, then the color will become different. For example, adding blue to green will make the second more "cold". This is the name of the shades that can be found on Adding yellow makes the color "warm", for example light green. And if you add a lot of yellow paint, you get lemon.

How to change color correctly?

Often, artists face a more difficult task - how to get a green color that will be much more interesting than the standard one. To do this, you can experiment. For example, add black - it will make green more gloomy, similar to swamp or coniferous, but in some cases this is necessary. Black must be handled very carefully. Even the smallest drop can make the color muddy, so add it little by little. And white will make the shade lighter. In this case, the brightness will become less - green will be as if in a fog. The same recommendations apply to other colors.

In pursuit of interesting shades, some begin to add all the colors in a row to green. This is not worth doing. The colors on the other side can easily spoil everything. That is, if you mix yellow and blue, try not to add red and its shades to them. Only those who have sufficient skills in painting can do it correctly.

The psychology of green

Knowing how to get green can come in handy in many areas of life. But before actively using it in the interior, decide whether it suits you from a psychological point of view.

Experts have long paid attention to the fact that furniture can greatly affect a person's mood. For example, red evokes passion or aggression, soft pink is suitable for a frivolous pastime, and orange adds energy and positive.

As for green, a lot depends on its brightness and saturation. Lighter tones allow you to relax and have a good rest after a hard day's work, while juicy emerald shades or light green will give you vivacity. At the same time, dark tones make the interior more serious. But all psychologists are inclined to one opinion - green is the most relaxing and calm color of all. If this is exactly what you need - actively use green in the interior.

How to get other colors?

Whatever your goals, you can hardly get by with one color. Green can be successfully combined with many other shades, because in nature the leaves of this particular color serve as a backdrop for irises, dandelions, forget-me-nots and poppies. Moreover, it all looks very harmonious. So green, if desired, can be successfully combined with any shades. But how do you get them?

Red, yellow and blue are the main ones, we found out above. They are complemented by black and white. And what colors can be obtained by mixing, a simple table will tell.

The article gives a complete and detailed answer to the question of how to get green by mixing paints. So now you can easily cope with this task and create many amazing shades that are not in your palette of colors.

Blue is one of the primary colors. Along with red and yellow, it is included in the list of tones that cannot be produced at home. But artists know very well how to get blue in its various shades - for this you need to mix the classic color with other pigments, which gives amazing results.

traditional color wheel

Experts call blue, red, yellow the "three pillars" of color and painting. It is on them that the widest palette of semitones of the second and third orders rests, they are combined with each other, while the creation is excluded.

All the most important colors are included in the so-called color wheel. It is a conditional model divided into sectors. The latter are placed in an order close to the location in the visible light spectrum. Nearby shades are called chromatic, they can be mixed with each other to obtain a new chromatic (color) paint. If, when mixing colors, take opposite tones, an achromatic color (grayish) will come out. That is, the farther apart the colors, the more likely that their mixture will give an inexpressive, ugly tone.

Classic blue and its shades

It will not work to make a blue color at home, so to create its different shades, you need to purchase ready-made gouache, watercolor, acrylic paint or another type of dye (even plasticine). Then you can use other colors from the set, because when combined, you can get incredible tones and halftones of blue. Artists have special tables with the names of shades and the necessary proportions for paints, but in practice you still have to experiment.

In ordinary gouache sets, blue is represented by a shade of ultramarine. It is very bright, moderately dark, has slightly purple notes. There is an important rule to remember: white is added to lighten the tone, black is added to darken it, and various colors are added to change the reflection of the paint.

blue green

Making shades of blue with green highlights is easy. The effect of a dark green tone is given by the introduction of a small amount of ready-made green paint into the blue. If it doesn't exist, you can do something else. Since the combination of blue and yellow gives a green color, you can add a little yellowness to the blue. Next, the paint is lightened with white, resulting in a shade of the third order, less saturated.

Prussian blue

Azure color also contains green shades. Artists have a recipe for its preparation - you need to combine 1 part of blue and the same amount of light green or bright green (herbal) shade. If necessary, the tone is diluted with white.

blue purple

This color is considered very rich, powerful in energy, it is prepared by combining blue with red paint in equal proportions. But the finished purple must be made to “turn blue”, for which a blue color scheme is added drop by drop until the desired tone is obtained. Usually the final ratio does not exceed 2:1.

royal blue

The color royal is a dark, cold tone, close to classic. Traditional royal blue is part of the HTML color scheme used in computer graphics. It is also the main tone of ink, paint for cartridges. To make this color, a drop of black and even less green are introduced into ultramarine.

blue gray

This shade is reminiscent of an overcast sky, as well as the color of the water on a non-sunny day. In the base blue, you need to add a little brown, as a result you get a dark blue-gray tone. It is diluted with whitewash to the desired degree of clarification. There is another option for creating a gray-blue hue - combine blue with orange, as a result you get a grayish mass with a slightly blue glow.

Dark blue

Blue paint begins to darken from the addition of a small amount of black color. The ratio should be no more than 4:1. Creating such a shade is required if you need to “calm down” a color when it is initially too bright.

Blue

Blue is easy to make. To do this, blue of any tone is diluted with whitewash 3: 1 or more. Increasing the volume of white paint leads to even more lightening up to sky blue or pastel blue. To achieve the manufacture of the original tone, you can dilute turquoise with whitewash.

Other shades

Wedgwood tone is obtained by combining a portion of blue, as well as a drop of white and black paint. For dark turquoise, a yellow-green color scheme is added dropwise to blue. Cornflower blue is created by mixing purple, blue, a drop of brown and the same amount of black dye.

Blue in nature

In the real world, blue is perceived by the eye in the range of 440-485 nm. This is the digital value of the electromagnetic wavelength, which has a blue tone in the general spectrum of light. In nature, you can see up to 180 shades of blue - its tones are visible in the color of the seas and oceans, the sky, twilight, moonlight, many plants, insects.

To get the perfect color, you need to ensure that all the ingredients are similar in chemical composition. Otherwise, the mass may delaminate, leaving unmixed streaks in it. It is also important to use high-quality paints, because others begin to darken and gray over time. Oil dyes are very susceptible to changes - it is better to first try working on a small area and evaluate the effect after a couple of days. Artists note: the fewer colors were combined, the better the result will be, the less risk of burnout and flaking of the finished decor.

How to get blue color when mixing paints for painting, printing and computer graphics? Blue is part of the triad of primary colors, where the other two are red and yellow. Under natural conditions, it is impossible to obtain a color by mixing the other two. All features are determined by many conditions.

It is impossible to get a truly basic color in the process of painting pictures. It is false to assume that blue is obtained by mixing green and yellow, on the contrary, olive comes out. How to get blue? Achieving the goal is simple: just mix blue and white in equal proportions.

In the visual arts, a ready-made palette is often used, where the proportions and ratios of colors are painted. But with it you can get only shades of blue:

• Blue - produced by mixing aquamarine and white paint in a 2: 1 ratio.
• royal shade- obtained by mixing aquamarine and pink.
• Dark Blue - Produced by combining two parts of standard blue and one part of black.
• Gray-blue - produced by combining the base color and brown. It is brown that will create a darkening effect.

There are a lot of options for proportions and ratios, combinations of shades. In the standard set, an analogue of blue paint can be obtained by mixing the color aquamarine with pink.

On the video: how to mix oil paints.

Synthesis in typography

This method is used in modern printers. It is believed that in the printing house blue can be obtained by mixing green and one of the shades of purple - fuchsia. Naturally, a pure base will not work, but only an analogue close to the original.

In the field of typographic work, the lack of quality in color saturation is improved artificially, with the help of a play of shades and contrast. With the help of a standard color wheel, shades can also be recreated. How to make a high-quality analogue, a highly qualified specialist will be able to answer using the trial and error method. In any case, there must be a basic tone, which, when mixed, will become the basis for creating your own interpretations.

Not only the palette for creating color is taken into account, but also the features of the surface on which the tone will be applied. First you need to take a sample and test it.

Computer graphics and main palette

You can create a blue color in the so-called "artificial conditions" without any problems. Even though it is basic, it is possible to find a specific condition. The software provides the ability to synthesize any color using a properly written binary code.

Unlike printers and artists, to get this base, programmers don't have to deal with the problem of getting the base color. The main thing is to choose the appropriate software environment.

natural dyes

Natural dye is valued much more than synthetic options. Such paint can be used for dyeing textiles and food items. You can get the blue color from:

• grapes;
• blueberries;
• blackberries;
• eggplant peel;
• cauliflower leaves.

There are more exotic options for obtaining a base. They are too expensive, complicated in terms of cooking technology. The above are actively used in the creation of food dyes, watercolors and gouache. But the resulting paint is completely safe for health and life. There are also disadvantages in the use of natural dyes: it is quickly washed out, an unsaturated base leaves marks on the skin and surfaces.

How to get an orange color and its shades in 10 photos + a table of all possible derivatives. How to get coral, peach, terracotta and red colors? Influence of white, black and brown in color composition.
Orange color is obtained by mixing red and yellow, but you can get a shade of this color (soft and light enough) by adding pink to yellow paint. Subsequently, all the main saturated shades of orange are somehow associated with red, yellow, pink, white. More complex and darker tones are obtained with the participation of purple, brown and black.

How to get an orange color by mixing paints: red and yellow of the desired tone?

Everyone knows that the main orange gradient lies between red-orange and yellow-orange. Since the color is obtained or two colors, then, depending on the percentage of each color, there is a shift in one direction or another.
Of course, all the resulting shades from the primary colors (in our case, red and yellow) will be paler. However, orange is made up of 2 warm tones, the waves of which are not very different (the opposite would be blue and yellow to create green), and even in the second order it looks quite catchy.

Mixing acrylic paints for painting:

How to get yellow-orange and red-orange?

It is believed that to get a classic orange, you need to take 1 part of yellow and 1 part of red. However, in practice it turns out that you have to take more yellow than red. In the palette, you can always choose the right tone by adding yellow or red to the mixture.

How to get a light orange color?

This tone has a wide range of pastel shades. They are built using white, but there is an alternative: mix pink and yellow, the resulting shade is a soft orange tone related to the light range:

Another option would be to add yellow and white.
Usually in a palette of 12 colors there is already an orange tint, which is much brighter than the color obtained by mixing, so when building shades, we will use the existing one.
There is a bright red-orange tone in my palette of glossy acrylic paints. To get light orange tones from it, I need to mix red-orange, yellow and white:

How to get coral color?

Although this shade is closer to pink, its construction is completely tied to orange, and there are 2 scenarios for obtaining it:
1) Complicated: we take red-orange, pink and white in approximately equal parts (when you mix, adjust the shade by eye, the main thing is to mix the paint thoroughly).

2) Red-orange is close to scarlet, and scarlet is a shade of red. Red mixed with white gives pink, and coral can be called a light shade of pink with an orange undertone.

In this case, the coral will lean closer to orange, but still remain a luxurious tropical shade.

How to get peach color?

Another light and subtle shade of the base color. Peach belongs to the soft pastel scale., standing out from it with its sophistication, it has long been loved and entrenched in our imagination. Its construction consists of 4 colors:
1) Red+yellow+pink+white
2) Orange+yellow+pink+white
3) Coral + yellow + white

How to get terracotta color?

Let's move on to darker shades of orange. One of the interesting options is terracotta: a medium-dark, but rich, complex red-orange hue is obtained by mixing purple and red-orange:

To make the shade lighter, adding a drop of white will help.

How to get red color?

The red color has an orange undertone. If you take brown and mix it with red-orange, the resulting shades will be dark, but saturated. You can adjust the tone by adding yellow.

How to get a dark orange color?

You can adjust the brightness of orange shades using black: either to completely darken it, or simply dim the brightness. This is necessary to create contrast.
If you want to dim light shades: mix white with black to a gray mass and bring it into the working tone.

Table for obtaining orange shades when mixing colors:

Practice in color science is indispensable, but theory can give you an understanding of how this or that tone is built.

In the center - the main color from which the color is built. The first circle of colors is the shades with which the color is mixed in the proportion indicated below. The third circle is formed by tones that are the result of mixing the primary color and the first circle in a smaller proportion than the third. On the sides of the color at the end of the beam, the same color with the addition of black (darker) and white (lighter).

How to get other colors and their shades: theory and practice. Click on the icon.