Instruction

For start console games the computer uses special emulators. But if emulators for older versions of consoles work more stably, then there may be problems with emulating games on the Xbox360. To begin with, you should make sure that your computer has enough power. You must have at least a dual-core processor, preferably with a frequency greater than 3.2 GHz. Preferably two gigabytes random access memory and a good discrete graphics card with 512 megabytes of memory. In general, the more powerful the computer, the more likely it is to run the game on the computer.

As already noted, special emulators are used to run games from consoles. Download the Cxbx-0.7.8c emulator from the Internet. It doesn't need to be installed. Just unzip the archive to any folder. Start the emulator. After launching it, select Settings. Next, in the menu that appears, click on Config video.

The graphics settings window will open. Check the box next to the line Start in fullscreen. Then click on the arrow next to the line Video resolution. A window will open with a list of possible screen resolutions. Set the minimum resolution.

After that, click File. In the menu that opens, select Open xbp. Then, in the browse window, specify the path to the saved game image. The game will now open. Controls and other settings can be configured using the emulator menu.

It should be noted that there is no guarantee that the game will definitely run on a computer using an emulator. Also, no one guarantees that it will not "slow down". It all depends on the specific game and on the power of your computer. So do not be surprised when, when you try to open it, you just see an error in the emulator, or after starting the game itself, it will pretty much “slow down”.

If you have recently purchased a set-top box, you may have a question about how to copy games to the console. Discs with them are not cheap, and on the Internet the choice of games for your console is simply huge.

Instruction

In order not to overload the drive, not to hear the noise from its operation, and so that the game loads faster, it is better to install it on the hard drive. However, this requires a disc to drive the console without fail. However, the game can be installed by ignoring this requirement.

Find on the Internet and download the CloneCD program, preferably the most new version whichever you find. Do not forget to check the downloaded program for viruses and malicious code, as there is no need to be too careful. Then complete the installation and in the window that appears, select Read to Image. Next, select the drive that is suitable for creating a copy of the disc. Click the Next button and a path selection window will appear. Set the desired path. You can rename the file as you wish. The main thing is to leave the extension unchanged.

Click on the Save button. Since you selected the save path earlier, click Ok. Wait until a copy of the disk is created (on average, this process takes 10-20 minutes). The best speed for copying a disc is 2.4 speed. This way you can avoid many recording errors, since the quality of the recording is inversely proportional to its speed.

Copy the game disc image to the console. Your xbox 360 game console may have one of the drives listed below. Each of them has its own characteristics: - Samsung BenQ. These drives can play almost any disc without any difficulty; - Hitachi. In this case, if the drive model is outdated, to write games from PC to disc, Pioneer brand 109-112 disc drives must be used. The outdated Hitachi model will not be able to record discs on other drives.

Having defined everything specifications and making right choice, take a two-layer disc, which, according to the marking, corresponds to the existing drive. Find the image with the game, consisting of files that have the extensions .dvd and .iso, and then burn.

Tip 3: How to burn games to hard drive on Xbox 360

Xbox 360 is a popular gaming console developed by Microsoft. Unlike its predecessors, this set-top box has a hard drive, and is also capable of recording games to external storage media. To record, you must use the console interface.

Instruction

Burning the game to a hard drive will speed up the operation of the console and extend the life of laser discs. This operation will increase the performance of the game and its loading speed. You can also install games on removable storage media, such as a flash drive or external HDD.

Insert the game disc you want to burn into the disc drive. Wait for the game to start and then press the X key on your joystick. Select "Install" from the menu that appears. After that, you will see a message that will display the process of writing files to the hard drive of the device.

To record a game, you need at least 4 GB of free space on a storage medium. Otherwise, you will receive a notification about the need to free up the necessary space by deleting music, videos and games recorded on the console. Installation may take up to 10 minutes. After the procedure is completed, you will see a corresponding notification.

To play the game from your hard drive, insert the game disc into your Xbox drive. After that, press the A button on the gamepad and select the game that is in the reader. It will be launched from the internal media of the set-top box.

To remove from your hard drive, also first install the media for the game you are about to remove. After that, press Y on the controller and select Delete. If you want to erase multiple games, go to the "Settings" - "System Settings" section of the main menu of the console. Then select "Storage" - "Hard Drive" - ​​"Games". In the list that appears, select the items that you want to erase from the device's memory.

Finding game that you want to upload to disk for xbox 360, you may encounter image files. You can overwrite them in the usual way, only they will not be read by the console in any way. For high-quality display of the game on the xbox 360, you need to correctly transfer the image files.

Find out if you can play from a flash drive on a computer? Will it be possible to play from a flash drive on an unflashed Xbox 360 and on PlayStaion 2, PS3 and PS4 - IT specialists answer.

Answer:

Many modern players are wondering if it is possible to play from a flash drive on the XBOX 360? Such USB media is an excellent solution for those who want to transfer their data, the games themselves, from console to console. You can store up to 32 gigabytes of information.

Here you can not do without the formatting procedure. Is it possible to play from a flash drive without Freeboot, on an unfirmed box? Yes, in principle they also support any type of recording device.

For formatting to work correctly, you should select the FAT32 system. This will delete absolutely all the files that were previously stored on the USB flash drive. If necessary, it is better to copy them to another folder. It is imperative to make sure that the storage device meets all the requirements of the set-top box itself.

If you want to increase the available capacity, then you already have to think about purchasing and connecting hard drives. In any case, about 512 MB are reserved for system needs. At least that much free space should always be available.

The best solution for active users will be hard drives of 320 GB or more. For multiplayer games and connection between multiple consoles, they are still often the main requirement. If Freeboot firmware is used, then it is better to use ready-made files of this format. Then there will be no problems with the recording. Files are easily dropped directly onto the flash drive itself.

Is it possible to play from a flash drive on a Playstation?

Players often wonder if it is possible to play from a flash drive on ps2, 3, 4. In this case, we again cannot do without formatting. The system remains the same - FAT32. You can do this on the computer itself, or you can use special programs. Is it possible to play from a flash drive on a computer? Of course, then the record is made even in a more simplified form.

It is worth creating a separate folder, inside which the games we need will be located. At the same time, such memory storage devices are supported by both original set-top boxes and flashed ones. It is best to install the Total Commander program on the computer if it is not available. This will make it easier to work with files, even in large numbers.

In addition, you will need special program Backup Manager, in the console menu when copying games, it makes an item with the appropriate name available. When using it, games will be visible on the external drive and in the drive if they are available for emulation. It is enough to click on the cross icon to launch what we need. The zero button is used to delete images. It will not be superfluous to purchase additional accessories that always make it easier to work with the console.

Most recently (albeit a little late - after all, 2017) I became the proud owner of an Xbox 360 game console! Aiming in shooters with a joystick still has problems, but I succeeded in how to record games on the Xbox 360.

Initial data, or What is required for this

The principle of installing pirated games on a flashed Xbox is similar for different versions firmware and shells used, but at the same time may differ slightly. Therefore, in this guide, I will give an example of my configuration, starting from which you can download games on Xbox.

Operating configuration: Xbox 360 E (2014) Freeboot + LT 3.0, Freestyle Dash shell and 500 GB hard drive.

In addition to the console itself, we will need access to a PC or laptop, a flash drive with a capacity of more than 8 GB (the size is determined by the average size of Xbox 360 games) or an external hard drive.

How to Record Games on Xbox 360: The Easiest Way

Stage 1: Prepare the flash drive

The Xbox 360 only recognizes FAT32 formatted external drives, so the first thing to do is open Windows Explorer, find the flash drive (or external hard drive) in the list, and right-click to open the context menu.

In the menu that appears, you need to find the line "Format ...". In the window that opens, specify the type of the desired file system (FAT32) or simply use the "Restore default settings" button. Then click "Start".

Attention! Formatting will destroy all data on the flash drive!

After a while (usually very quickly) the flash drive will be formatted, and you can proceed to the next step of the instructions for installing games on your Xbox 360 hard drive.

Stage 2: Copying game files to a flash drive

Before copying the files of the downloaded game for Xbox, you need to create a GAMES folder on the flash drive. It will look like this:

Then copy the downloaded game files to GAMES.

Please note that when you download a game from a torrent tracker, the folder with files (in our case, 54510842) will be nested inside another one (for example, Metro 2033), but I recommend copying only the main folder with all game files (54510842) to the flash drive.

Stage 3: Installing the game on the Xbox 360 from a flash drive

The resulting flash drive with the downloaded game files must be connected to the Xbox (for this it is convenient to use the front USB ports).

After that, turn on the console (if you haven't already, of course). You will see the main menu of the Freestyle Dash shell.

Scroll up or down the menu until you see the Programs menu. In this menu, select the "Explorer" item.

"Explorer" is an interface with two windows (a la Total Commander), each of which can display and interact with the contents of a particular directory.

In the left window, open our flash drive (Usb0 :) and the GAMES folder contained in it. In the right, you need to open the directory with games on your hard drive at: Hdd1: / Content / 00000000000000 ...

Next, using the joystick, select the folder with our game (54510842) in the left window, hold down the RB button (right shift, used to indicate the direction of copying: in our case, from left to right) and start copying the game to the HDD using the A key.

After the installation of the game on the Xbox is completed, you must return to the main console menu and go to the settings window. In the "Content Settings" open the "Scan" item and click the "Scan" item. The scanning process will detect all recently installed games on Xbox and add them to the general list.

Please note that if you have unchecked "Turn off autoscan at startup" in the "Scanning" item, you can simply restart the console, thereby starting scanning for new games. However, this process takes quite a long time, so I recommend doing a manual scan.

Voila! Now you know how to install the game on Xbox360!