Length and distance converter Mass converter Converter of volume measures of bulk products and food products Area converter Converter of volume and units of measurement in culinary recipes Temperature converter Converter of pressure, mechanical stress, Young's modulus Converter of energy and work Converter of power Converter of force Converter of time Linear speed converter Flat angle Converter thermal efficiency and fuel efficiency Converter of numbers in various number systems Converter of units of measurement of quantity of information Currency rates Women's clothing and shoe sizes Men's clothing and shoe sizes Angular velocity and rotation frequency converter Acceleration converter Angular acceleration converter Density converter Specific volume converter Moment of inertia converter Moment of force converter Torque converter Specific heat of combustion converter (by mass) Energy density and specific heat of combustion converter (by volume) Temperature difference converter Coefficient of thermal expansion converter Thermal resistance converter Thermal conductivity converter Specific heat capacity converter Energy exposure and thermal radiation power converter Heat flux density converter Heat transfer coefficient converter Volume flow rate converter Mass flow rate converter Molar flow rate converter Mass flow density converter Molar concentration converter Mass concentration in solution converter Dynamic (absolute) viscosity converter Kinematic viscosity converter Surface tension converter Vapor permeability converter Vapor permeability and vapor transfer rate converter Sound level converter Microphone sensitivity converter Sound Pressure Level (SPL) Converter Sound Pressure Level Converter with Selectable Reference Pressure Luminance Converter Luminous Intensity Converter Illuminance Converter Computer Graphics Resolution Converter Frequency and Wavelength Converter Diopter Power and Focal Length Diopter Power and Lens Magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Volume charge density converter Electric current converter Linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrical resistance converter Electrical resistivity converter Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBm), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing radiation absorbed dose rate converter Radioactivity. Radioactive decay converter Radiation. Exposure dose converter Radiation. Absorbed dose converter Decimal prefix converter Data transfer Typography and image processing unit converter Timber volume unit converter Calculation of molar mass Periodic table of chemical elements by D. I. Mendeleev

1 decimeter [dm] = 10 centimeter [cm]

Initial value

Converted value

meter exameter petameter terameter gigameter megameter kilometer hectometer decameter decimeter centimeter millimeter micrometer micron nanometer picometer femtometer attometer megaparsec kiloparsec parsec light year astronomical unit league naval league (UK) maritime league (international) league (statutory) mile nautical mile (UK) nautical mile (international) mile (statutory) mile (USA, geodetic) mile (Roman) 1000 yards furlong furlong (USA, geodetic) chain chain (USA, geodetic) rope (English rope) genus genus (USA, geodetic) pepper floor (English) . pole) fathom, fathom fathom (US, geodetic) cubit yard foot foot (US, geodetic) link link (US, geodetic) cubit (UK) hand span finger nail inch inch (US, geodetic) barley grain (eng. barleycorn) thousandth of a microinch angstrom atomic unit of length x-unit Fermi arpan soldering typographic point twip cubit (Swedish) fathom (Swedish) caliber centiinch ken arshin actus (Ancient Roman) vara de tarea vara conuquera vara castellana cubit (Greek) long reed reed long elbow palm "finger" Planck length classical electron radius Bohr radius equatorial radius of the Earth polar radius of the Earth distance from the Earth to the Sun radius of the Sun light nanosecond light microsecond light millisecond light second light hour light day light week Billion light years Distance from the Earth to the Moon cables (international) cable length (British) cable length (USA) nautical mile (USA) light minute rack unit horizontal pitch cicero pixel line inch (Russian) inch span foot fathom oblique fathom verst boundary verst

Convert feet and inches to meters and vice versa

foot inch

m

More about length and distance

General information

Length is the largest measurement of the body. In three-dimensional space, length is usually measured horizontally.

Distance is a quantity that determines how far two bodies are from each other.

Measuring distance and length

Units of distance and length

In the SI system, length is measured in meters. Derived units such as kilometer (1000 meters) and centimeter (1/100 meter) are also commonly used in the metric system. Countries that do not use the metric system, such as the US and UK, use units such as inches, feet and miles.

Distance in physics and biology

In biology and physics, lengths are often measured at much less than one millimeter. For this purpose, a special value has been adopted, the micrometer. One micrometer is equal to 1×10⁻⁶ meters. In biology, the size of microorganisms and cells is measured in micrometers, and in physics, the length of infrared electromagnetic radiation is measured. A micrometer is also called a micron and is sometimes, especially in English literature, denoted by the Greek letter µ. Other derivatives of the meter are also widely used: nanometers (1 × 10⁻⁹ meters), picometers (1 × 10⁻¹² meters), femtometers (1 × 10⁻¹⁵ meters and attometers (1 × 10⁻¹⁸ meters).

Navigation distance

Shipping uses nautical miles. One nautical mile is equal to 1852 meters. It was originally measured as an arc of one minute along the meridian, that is, 1/(60x180) of the meridian. This made latitude calculations easier, since 60 nautical miles equaled one degree of latitude. When distance is measured in nautical miles, speed is often measured in knots. One sea knot equals a speed of one nautical mile per hour.

Distance in astronomy

In astronomy, large distances are measured, so special quantities are adopted to facilitate calculations.

Astronomical unit(au, au) is equal to 149,597,870,700 meters. The value of one astronomical unit is a constant, that is, a constant value. It is generally accepted that the Earth is located at a distance of one astronomical unit from the Sun.

Light year equal to 10,000,000,000,000 or 10¹³ kilometers. This is the distance that light travels in a vacuum in one Julian year. This quantity is used in popular science literature more often than in physics and astronomy.

Parsec approximately equal to 30,856,775,814,671,900 meters or approximately 3.09 × 10¹³ kilometers. One parsec is the distance from the Sun to another astronomical object, such as a planet, star, moon, or asteroid, with an angle of one arcsecond. One arcsecond is 1/3600 of a degree, or approximately 4.8481368 microrads in radians. Parsec can be calculated using parallax - the effect of visible changes in body position, depending on the observation point. When making measurements, lay a segment E1A2 (in the illustration) from the Earth (point E1) to a star or other astronomical object (point A2). Six months later, when the Sun is on the other side of the Earth, a new segment E2A1 is laid from the new position of the Earth (point E2) to the new position in space of the same astronomical object (point A1). In this case, the Sun will be at the intersection of these two segments, at point S. The length of each of the segments E1S and E2S is equal to one astronomical unit. If we plot a segment through point S, perpendicular to E1E2, it will pass through the intersection point of segments E1A2 and E2A1, I. The distance from the Sun to point I is segment SI, it is equal to one parsec, when the angle between segments A1I and A2I is two arcseconds.

On the image:

• A1, A2: apparent star position
• E1, E2: Earth position
• S: Sun position
• I: point of intersection
• IS = 1 parsec
• ∠P or ∠XIA2: parallax angle
• ∠P = 1 arcsecond

Other units

League- an obsolete unit of length previously used in many countries. It is still used in some places, such as the Yucatan Peninsula and rural areas of Mexico. This is the distance a person travels in an hour. Sea League - three nautical miles, approximately 5.6 kilometers. Lieu is a unit approximately equal to a league. In English, both leagues and leagues are called the same, league. In literature, league is sometimes found in the title of books, such as “20,000 Leagues Under the Sea” - the famous novel by Jules Verne.

Elbow- an ancient value equal to the distance from the tip of the middle finger to the elbow. This value was widespread in the ancient world, in the Middle Ages, and until modern times.

Yard used in the British Imperial system and is equal to three feet or 0.9144 meters. In some countries, such as Canada, which adopts the metric system, yards are used to measure fabric and the length of swimming pools and sports fields such as golf courses and soccer fields.

Definition of meter

The definition of meter has changed several times. The meter was originally defined as 1/10,000,000 of the distance from the North Pole to the equator. Later, the meter was equal to the length of the platinum-iridium standard. The meter was later equated to the wavelength of the orange line of the electromagnetic spectrum of the krypton atom ⁸⁶Kr in a vacuum, multiplied by 1,650,763.73. Today, a meter is defined as the distance traveled by light in a vacuum in 1/299,792,458 of a second.

Computations

In geometry, the distance between two points, A and B, with coordinates A(x₁, y₁) and B(x₂, y₂) is calculated by the formula:

Calculations for converting units in the converter " Length and distance converter" are performed using unitconversion.org functions.

How many cm are in 1 inch?

10cm. I don’t know how to stretch it to 40 characters :-)

There are 10 centimeters in one decimeter.

I studied well at school and therefore remembered this strange measure of length for all of us.

The decimeter is not used anywhere in our country. I don’t even know why they introduced this measure of length into science and fool children’s heads with it.

Millimeter, centimeter, meter and kilometer are the main measures of distance. Decimeters Nobody measures anything here.

Perhaps practice use of decimeters comes from physics. There are decimeter waves here - and this is a special group of waves in all phenomena of wave nature. If anyone remembers transistor receivers, then there was always a decimeter range. This, probably, became the scientific basis for introducing the study of the decimeter into the school curriculum.

The basis measuring systems is: in SI - meter, in GHS - centimeter. There are no decimeters.

A decimeter is a unit of distance equal to 10 (ten centimeters) or 0.1 m or 100 mm. In Russian it is denoted - dm, the international designation is dm. It should be noted that this unit is used quite rarely.

There are 10 centimeters in one decimeter. if linear - not square, not cubic.

One decimeter (dm) is relatively rarely used to indicate length.

There are 10 centimeters (cm) in one decimeter (dm). To all this you can also add:

One centimeter (cm) contains 0.1 decimeter (dm).

1 decimeter = 10 centimeters. A decimeter can be defined as follows: a unit of measurement of distance equal to 1/10 of a meter. Designations: Russian dm, international dm. If I'm not mistaken, then measures of length begin to be studied in elementary school, that is, from the first grade.

Well, to find the answer to this question, you don’t have to remember your school years. You need to know about this even if they wake you up at night and ask how many centimeters are in a decimeter. And there are only 10 centimeters in 1 decimeter. Centimeters are followed by decimeters, and then meters.

There are 10 centimeters in 1 decimeter. It’s easy to remember, since deci means a tenth of a unit of measurement. A decimeter is a tenth of a meter.

In Russian, decimeter can be abbreviated as dm, and the international abbreviation is dm.

1 dm. - this is most likely 1 decimeter. This is a mathematical quantity that is used to determine, for example, the length of something. So there are exactly 10 centimeters in one decimeter, and, accordingly, vice versa - in one centimeter there are exactly 0.1 decimeter. Everyone should know this from school.

Back in school we learned that a decimeter (dm) is a measure of length. It is not very common in everyday life, unlike centimeter (cm), meter (m), kilometer (km).

What is 1 dm equal to? It is known from the same school days that 1 dm is equal to 10 cm.

The name decimeter comes from the French decimetre, which in turn comes from the Latin decem, which means ten. And, accordingly, there are 10 centimeters in one decimeter. Just like there are 10 decimeters in one meter.

Decimeter, centimeter, meter, millimeter are all measures of length. Deci means 10. Thus, it turns out that there are exactly 10 centimeters in one decimeter. Accordingly, there are also 10 decimeters in one meter. Although decimeters are rarely used, unlike other measures of length.

Length and distance converter Mass converter Converter of volume measures of bulk products and food products Area converter Converter of volume and units of measurement in culinary recipes Temperature converter Converter of pressure, mechanical stress, Young's modulus Converter of energy and work Converter of power Converter of force Converter of time Linear speed converter Flat angle Converter thermal efficiency and fuel efficiency Converter of numbers in various number systems Converter of units of measurement of quantity of information Currency rates Women's clothing and shoe sizes Men's clothing and shoe sizes Angular velocity and rotation frequency converter Acceleration converter Angular acceleration converter Density converter Specific volume converter Moment of inertia converter Moment of force converter Torque converter Specific heat of combustion converter (by mass) Energy density and specific heat of combustion converter (by volume) Temperature difference converter Coefficient of thermal expansion converter Thermal resistance converter Thermal conductivity converter Specific heat capacity converter Energy exposure and thermal radiation power converter Heat flux density converter Heat transfer coefficient converter Volume flow rate converter Mass flow rate converter Molar flow rate converter Mass flow density converter Molar concentration converter Mass concentration in solution converter Dynamic (absolute) viscosity converter Kinematic viscosity converter Surface tension converter Vapor permeability converter Vapor permeability and vapor transfer rate converter Sound level converter Microphone sensitivity converter Sound Pressure Level (SPL) Converter Sound Pressure Level Converter with Selectable Reference Pressure Luminance Converter Luminous Intensity Converter Illuminance Converter Computer Graphics Resolution Converter Frequency and Wavelength Converter Diopter Power and Focal Length Diopter Power and Lens Magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Volume charge density converter Electric current converter Linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrical resistance converter Electrical resistivity converter Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBm), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing radiation absorbed dose rate converter Radioactivity. Radioactive decay converter Radiation. Exposure dose converter Radiation. Absorbed dose converter Decimal prefix converter Data transfer Typography and image processing unit converter Timber volume unit converter Calculation of molar mass Periodic table of chemical elements by D. I. Mendeleev

1 decimeter [dm] = 10 centimeter [cm]

Initial value

Converted value

meter exameter petameter terameter gigameter megameter kilometer hectometer decameter decimeter centimeter millimeter micrometer micron nanometer picometer femtometer attometer megaparsec kiloparsec parsec light year astronomical unit league naval league (UK) maritime league (international) league (statutory) mile nautical mile (UK) nautical mile (international) mile (statutory) mile (USA, geodetic) mile (Roman) 1000 yards furlong furlong (USA, geodetic) chain chain (USA, geodetic) rope (English rope) genus genus (USA, geodetic) pepper floor (English) . pole) fathom, fathom fathom (US, geodetic) cubit yard foot foot (US, geodetic) link link (US, geodetic) cubit (UK) hand span finger nail inch inch (US, geodetic) barley grain (eng. barleycorn) thousandth of a microinch angstrom atomic unit of length x-unit Fermi arpan soldering typographic point twip cubit (Swedish) fathom (Swedish) caliber centiinch ken arshin actus (Ancient Roman) vara de tarea vara conuquera vara castellana cubit (Greek) long reed reed long elbow palm "finger" Planck length classical electron radius Bohr radius equatorial radius of the Earth polar radius of the Earth distance from the Earth to the Sun radius of the Sun light nanosecond light microsecond light millisecond light second light hour light day light week Billion light years Distance from the Earth to the Moon cables (international) cable length (British) cable length (USA) nautical mile (USA) light minute rack unit horizontal pitch cicero pixel line inch (Russian) inch span foot fathom oblique fathom verst boundary verst

Convert feet and inches to meters and vice versa

foot inch

m

More about length and distance

General information

Length is the largest measurement of the body. In three-dimensional space, length is usually measured horizontally.

Distance is a quantity that determines how far two bodies are from each other.

Measuring distance and length

Units of distance and length

In the SI system, length is measured in meters. Derived units such as kilometer (1000 meters) and centimeter (1/100 meter) are also commonly used in the metric system. Countries that do not use the metric system, such as the US and UK, use units such as inches, feet and miles.

Distance in physics and biology

In biology and physics, lengths are often measured at much less than one millimeter. For this purpose, a special value has been adopted, the micrometer. One micrometer is equal to 1×10⁻⁶ meters. In biology, the size of microorganisms and cells is measured in micrometers, and in physics, the length of infrared electromagnetic radiation is measured. A micrometer is also called a micron and is sometimes, especially in English literature, denoted by the Greek letter µ. Other derivatives of the meter are also widely used: nanometers (1 × 10⁻⁹ meters), picometers (1 × 10⁻¹² meters), femtometers (1 × 10⁻¹⁵ meters and attometers (1 × 10⁻¹⁸ meters).

Navigation distance

Shipping uses nautical miles. One nautical mile is equal to 1852 meters. It was originally measured as an arc of one minute along the meridian, that is, 1/(60x180) of the meridian. This made latitude calculations easier, since 60 nautical miles equaled one degree of latitude. When distance is measured in nautical miles, speed is often measured in knots. One sea knot equals a speed of one nautical mile per hour.

Distance in astronomy

In astronomy, large distances are measured, so special quantities are adopted to facilitate calculations.

Astronomical unit(au, au) is equal to 149,597,870,700 meters. The value of one astronomical unit is a constant, that is, a constant value. It is generally accepted that the Earth is located at a distance of one astronomical unit from the Sun.

Light year equal to 10,000,000,000,000 or 10¹³ kilometers. This is the distance that light travels in a vacuum in one Julian year. This quantity is used in popular science literature more often than in physics and astronomy.

Parsec approximately equal to 30,856,775,814,671,900 meters or approximately 3.09 × 10¹³ kilometers. One parsec is the distance from the Sun to another astronomical object, such as a planet, star, moon, or asteroid, with an angle of one arcsecond. One arcsecond is 1/3600 of a degree, or approximately 4.8481368 microrads in radians. Parsec can be calculated using parallax - the effect of visible changes in body position, depending on the observation point. When making measurements, lay a segment E1A2 (in the illustration) from the Earth (point E1) to a star or other astronomical object (point A2). Six months later, when the Sun is on the other side of the Earth, a new segment E2A1 is laid from the new position of the Earth (point E2) to the new position in space of the same astronomical object (point A1). In this case, the Sun will be at the intersection of these two segments, at point S. The length of each of the segments E1S and E2S is equal to one astronomical unit. If we plot a segment through point S, perpendicular to E1E2, it will pass through the intersection point of segments E1A2 and E2A1, I. The distance from the Sun to point I is segment SI, it is equal to one parsec, when the angle between segments A1I and A2I is two arcseconds.

On the image:

• A1, A2: apparent star position
• E1, E2: Earth position
• S: Sun position
• I: point of intersection
• IS = 1 parsec
• ∠P or ∠XIA2: parallax angle
• ∠P = 1 arcsecond

Other units

League- an obsolete unit of length previously used in many countries. It is still used in some places, such as the Yucatan Peninsula and rural areas of Mexico. This is the distance a person travels in an hour. Sea League - three nautical miles, approximately 5.6 kilometers. Lieu is a unit approximately equal to a league. In English, both leagues and leagues are called the same, league. In literature, league is sometimes found in the title of books, such as “20,000 Leagues Under the Sea” - the famous novel by Jules Verne.

Elbow- an ancient value equal to the distance from the tip of the middle finger to the elbow. This value was widespread in the ancient world, in the Middle Ages, and until modern times.

Yard used in the British Imperial system and is equal to three feet or 0.9144 meters. In some countries, such as Canada, which adopts the metric system, yards are used to measure fabric and the length of swimming pools and sports fields such as golf courses and soccer fields.

Definition of meter

The definition of meter has changed several times. The meter was originally defined as 1/10,000,000 of the distance from the North Pole to the equator. Later, the meter was equal to the length of the platinum-iridium standard. The meter was later equated to the wavelength of the orange line of the electromagnetic spectrum of the krypton atom ⁸⁶Kr in a vacuum, multiplied by 1,650,763.73. Today, a meter is defined as the distance traveled by light in a vacuum in 1/299,792,458 of a second.

Computations

In geometry, the distance between two points, A and B, with coordinates A(x₁, y₁) and B(x₂, y₂) is calculated by the formula:

Calculations for converting units in the converter " Length and distance converter" are performed using unitconversion.org functions.

Length and distance converter Mass converter Converter of volume measures of bulk products and food products Area converter Converter of volume and units of measurement in culinary recipes Temperature converter Converter of pressure, mechanical stress, Young's modulus Converter of energy and work Converter of power Converter of force Converter of time Linear speed converter Flat angle Converter thermal efficiency and fuel efficiency Converter of numbers in various number systems Converter of units of measurement of quantity of information Currency rates Women's clothing and shoe sizes Men's clothing and shoe sizes Angular velocity and rotation frequency converter Acceleration converter Angular acceleration converter Density converter Specific volume converter Moment of inertia converter Moment of force converter Torque converter Specific heat of combustion converter (by mass) Energy density and specific heat of combustion converter (by volume) Temperature difference converter Coefficient of thermal expansion converter Thermal resistance converter Thermal conductivity converter Specific heat capacity converter Energy exposure and thermal radiation power converter Heat flux density converter Heat transfer coefficient converter Volume flow rate converter Mass flow rate converter Molar flow rate converter Mass flow density converter Molar concentration converter Mass concentration in solution converter Dynamic (absolute) viscosity converter Kinematic viscosity converter Surface tension converter Vapor permeability converter Vapor permeability and vapor transfer rate converter Sound level converter Microphone sensitivity converter Sound Pressure Level (SPL) Converter Sound Pressure Level Converter with Selectable Reference Pressure Luminance Converter Luminous Intensity Converter Illuminance Converter Computer Graphics Resolution Converter Frequency and Wavelength Converter Diopter Power and Focal Length Diopter Power and Lens Magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Volume charge density converter Electric current converter Linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrical resistance converter Electrical resistivity converter Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBm), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing radiation absorbed dose rate converter Radioactivity. Radioactive decay converter Radiation. Exposure dose converter Radiation. Absorbed dose converter Decimal prefix converter Data transfer Typography and image processing unit converter Timber volume unit converter Calculation of molar mass Periodic table of chemical elements by D. I. Mendeleev

1 meter [m] = 10 decimeter [dm]

Initial value

Converted value

meter exameter petameter terameter gigameter megameter kilometer hectometer decameter decimeter centimeter millimeter micrometer micron nanometer picometer femtometer attometer megaparsec kiloparsec parsec light year astronomical unit league naval league (UK) maritime league (international) league (statutory) mile nautical mile (UK) nautical mile (international) mile (statutory) mile (USA, geodetic) mile (Roman) 1000 yards furlong furlong (USA, geodetic) chain chain (USA, geodetic) rope (English rope) genus genus (USA, geodetic) pepper floor (English) . pole) fathom, fathom fathom (US, geodetic) cubit yard foot foot (US, geodetic) link link (US, geodetic) cubit (UK) hand span finger nail inch inch (US, geodetic) barley grain (eng. barleycorn) thousandth of a microinch angstrom atomic unit of length x-unit Fermi arpan soldering typographic point twip cubit (Swedish) fathom (Swedish) caliber centiinch ken arshin actus (Ancient Roman) vara de tarea vara conuquera vara castellana cubit (Greek) long reed reed long elbow palm "finger" Planck length classical electron radius Bohr radius equatorial radius of the Earth polar radius of the Earth distance from the Earth to the Sun radius of the Sun light nanosecond light microsecond light millisecond light second light hour light day light week Billion light years Distance from the Earth to the Moon cables (international) cable length (British) cable length (USA) nautical mile (USA) light minute rack unit horizontal pitch cicero pixel line inch (Russian) inch span foot fathom oblique fathom verst boundary verst

Convert feet and inches to meters and vice versa

foot inch

m

Specific fuel consumption

More about length and distance

General information

Length is the largest measurement of the body. In three-dimensional space, length is usually measured horizontally.

Distance is a quantity that determines how far two bodies are from each other.

Measuring distance and length

Units of distance and length

In the SI system, length is measured in meters. Derived units such as kilometer (1000 meters) and centimeter (1/100 meter) are also commonly used in the metric system. Countries that do not use the metric system, such as the US and UK, use units such as inches, feet and miles.

Distance in physics and biology

In biology and physics, lengths are often measured at much less than one millimeter. For this purpose, a special value has been adopted, the micrometer. One micrometer is equal to 1×10⁻⁶ meters. In biology, the size of microorganisms and cells is measured in micrometers, and in physics, the length of infrared electromagnetic radiation is measured. A micrometer is also called a micron and is sometimes, especially in English literature, denoted by the Greek letter µ. Other derivatives of the meter are also widely used: nanometers (1 × 10⁻⁹ meters), picometers (1 × 10⁻¹² meters), femtometers (1 × 10⁻¹⁵ meters and attometers (1 × 10⁻¹⁸ meters).

Navigation distance

Shipping uses nautical miles. One nautical mile is equal to 1852 meters. It was originally measured as an arc of one minute along the meridian, that is, 1/(60x180) of the meridian. This made latitude calculations easier, since 60 nautical miles equaled one degree of latitude. When distance is measured in nautical miles, speed is often measured in knots. One sea knot equals a speed of one nautical mile per hour.

Distance in astronomy

In astronomy, large distances are measured, so special quantities are adopted to facilitate calculations.

Astronomical unit(au, au) is equal to 149,597,870,700 meters. The value of one astronomical unit is a constant, that is, a constant value. It is generally accepted that the Earth is located at a distance of one astronomical unit from the Sun.

Light year equal to 10,000,000,000,000 or 10¹³ kilometers. This is the distance that light travels in a vacuum in one Julian year. This quantity is used in popular science literature more often than in physics and astronomy.

Parsec approximately equal to 30,856,775,814,671,900 meters or approximately 3.09 × 10¹³ kilometers. One parsec is the distance from the Sun to another astronomical object, such as a planet, star, moon, or asteroid, with an angle of one arcsecond. One arcsecond is 1/3600 of a degree, or approximately 4.8481368 microrads in radians. Parsec can be calculated using parallax - the effect of visible changes in body position, depending on the observation point. When making measurements, lay a segment E1A2 (in the illustration) from the Earth (point E1) to a star or other astronomical object (point A2). Six months later, when the Sun is on the other side of the Earth, a new segment E2A1 is laid from the new position of the Earth (point E2) to the new position in space of the same astronomical object (point A1). In this case, the Sun will be at the intersection of these two segments, at point S. The length of each of the segments E1S and E2S is equal to one astronomical unit. If we plot a segment through point S, perpendicular to E1E2, it will pass through the intersection point of segments E1A2 and E2A1, I. The distance from the Sun to point I is segment SI, it is equal to one parsec, when the angle between segments A1I and A2I is two arcseconds.

On the image:

• A1, A2: apparent star position
• E1, E2: Earth position
• S: Sun position
• I: point of intersection
• IS = 1 parsec
• ∠P or ∠XIA2: parallax angle
• ∠P = 1 arcsecond

Other units

League- an obsolete unit of length previously used in many countries. It is still used in some places, such as the Yucatan Peninsula and rural areas of Mexico. This is the distance a person travels in an hour. Sea League - three nautical miles, approximately 5.6 kilometers. Lieu is a unit approximately equal to a league. In English, both leagues and leagues are called the same, league. In literature, league is sometimes found in the title of books, such as “20,000 Leagues Under the Sea” - the famous novel by Jules Verne.

Elbow- an ancient value equal to the distance from the tip of the middle finger to the elbow. This value was widespread in the ancient world, in the Middle Ages, and until modern times.

Yard used in the British Imperial system and is equal to three feet or 0.9144 meters. In some countries, such as Canada, which adopts the metric system, yards are used to measure fabric and the length of swimming pools and sports fields such as golf courses and soccer fields.

Definition of meter

The definition of meter has changed several times. The meter was originally defined as 1/10,000,000 of the distance from the North Pole to the equator. Later, the meter was equal to the length of the platinum-iridium standard. The meter was later equated to the wavelength of the orange line of the electromagnetic spectrum of the krypton atom ⁸⁶Kr in a vacuum, multiplied by 1,650,763.73. Today, a meter is defined as the distance traveled by light in a vacuum in 1/299,792,458 of a second.

Computations

In geometry, the distance between two points, A and B, with coordinates A(x₁, y₁) and B(x₂, y₂) is calculated by the formula:

Calculations for converting units in the converter " Length and distance converter" are performed using unitconversion.org functions.

School theme: Formation of functional literacy of students’ personality as a condition for improving the quality of education

ShMO theme: Development of functional literacy of primary schoolchildren as an important factor in improving the quality of education

Teacher's methodological theme: " Using didactic games in mathematics lessons»

LESSON INFORMATION CARD

date 28.01.16

Class: 1 "G"

Item: mathematics

Subject: units of length are decimeter (1 dm). 1 dm=10cm

Target:

educational:learn to measure, draw segments of a given length using a ruler and pencil, compare work with a sample, work according to instructions, draw conclusions; consolidate knowledge of numbering, develop problem solving skills;

Reducational: carry out the development of cognitive motivation of children based on the acceptance and retention of educational tasks, positive motivation for learning; develop the ability to analyze, compare, and summarize educational material; develop the ability to work in pairs;

educational: cultivate independence, activity, responsibility, and a culture of behavior in the classroom.

Lesson type: learning new material

Methods: exploratory, reproductive, explanatory, illustrative

Equipment: TSO

Routing

1. Organizational moment. Psychological mood.

Guys, I want to start the lesson with words that will help you in your work.

We came here to study - not to be lazy, but to work.

We work diligently and listen carefully.

2. Updating knowledge

Calligraphy minute

-Verbal counting.

1. "Chain".

2. Plug and solve

6+ … -4= 5 8- … +6=9

10- … +3=7 6+2- … = 4

9-6+ … =8 5+ … -3= 6

3. Learning new material.

1. Introduction to the unit of measurement of length - the decimeter.

The teacher asks the children to measure the lengths of various objects and then asks:

– What unit of length did you use?(In centimeters.)

– There is a large unit of measurement of length -decimeter .

In mathematics, the word “decimeter” is usually written in abbreviation:dm .

One decimeter contains 10 centimeters, briefly it can be written as follows:

– Show 1 inch on your rulers.

2. Exercise in measuring the length of objects.

Children practice measuring the length of various objects using a new length measure - 1 dm. (For the first lessons on this topic, it is better to prepare for children measurements equal to 1 inch, so that it is more convenient for students to determine the length of objects.)

-Translate the numbers:

20 cm=…dm

5 dm=…cm

1 3cm = 10cm + 3cm

13cm = 1dm3cm

Fizminutka

Let's raise our hands up - once
Above the nose, above the eyes.
Hold your hands straight up
Don't swing. don't tremble.
Three - put your hands down,
Stay where you are, don't move around.
Up one, two, three, four, down!
We repeat, don’t be lazy!
We'll make turns
Do everything willingly.
Once - turn left,
Two is now the other way around.
So, no hurry at all,
Repeat 8 times.
Hands on the belt, legs wider!

4. Consolidation

Draw a segment 1 cm, 1 dm long; 1 dm = 10 cm

- Compare:

5 – 2 * 6 – 2

- Solve a problem.

There were 10 people on the bus. 3 people got off at the stop. How many people are left on the bus?

5. Lesson summary.

– What new did you learn?

– What discoveries did you make?

– Will you need the knowledge gained today in the future?

– What was the most interesting task for you?

1. Perform addition and subtraction with units of length.

1. 1 dm + 3 dm =

2. 4 dm 3 cm + 2 cm =

3. 6 dm 7 cm – 2 dm =

4. 10 dm 2 cm – 1 cm =

! We subtract centimeters from centimeters, decimeters from decimeters

2. Draw a segment:

The first is 8 cm long, and the second is 3 cm shorter.