In some cases, dyeing the fur is indispensable. You need to dye natural fur at home if you make something from it, if the fur of the fur coat burned out in the sun while wearing it, or if you no longer like the color of your fur product.
But how to dye the fur correctly so as not to spoil its appearance? Of course, the easiest way is to contact a specialized studio. But why, if everyone can dye or toned fur at home.
When deciding to dye natural fur yourself, remember that it must first be cleaned, as dirt prevents the dye from penetrating the structure of the pile.a
Important: before you start dyeing a fur coat, vest, fur collar or headdress, treat this item with an alkaline solution that you can prepare yourself. For this you will need:
- Water - liter
- Soda - 2 tsp
- Dishwashing liquid - 1 tsp
- Ammonia from a pharmacy - 1 tsp
Fur cleaning instructions:
- Prepare the solution by thoroughly mixing all the substances.
- Apply fat cream on the mezra. This is necessary in order to prevent it from drying out.
- Using a brush, apply the solution to the pile, evenly distributing it over the entire surface.
Rinse the fur under running clean water. - Lay the fur product in a horizontal position and leave to dry at room temperature.
How to dye natural fur with hair dye?
First of all, having decided to dye natural fur yourself, you should decide on the color in which you will dye it. General recommendations are to dye the fur product in darker colors. If, on the contrary, you want to dye it in a light color, then the fur must first be clarified with hydrogen peroxide.
You will need:
- Hair dye
- Latex gloves
Instruction
- Before dyeing the fur of a fur coat, thoroughly soak it in water.
- Color the fur with hair dye.
- Spread the paint evenly on the surface of the fur
Soak the paint for as long as indicated in the instructions for the paint. - To wash off the dye, rinse the fur in warm water, to which you need to add a little table vinegar.
- Dry the product by straightening it and lay it out to dry in an upright position.
How to dry fur?
You need to dry the fur properly, otherwise you can irrevocably spoil its appearance.
Never dry your fur with a hair dryer, use a special steamer instead.
When drying the fur with a jet of steam, comb it with a fur brush, which can be bought at a pet store. You need to comb the fur against the growth of the pile.
To give the fur a natural shine, you can rinse it with hair balm or a solution that you can prepare at home. The use of these products will allow you to give the fur a natural shine and softness.
How to tint fur with a spray?
Usually, at home, the spray is used to tint the long tips of the fur. At the same time, the undercoat itself and the mezra remain intact.
It is necessary to spray the spray on the fur at a distance of 60-70 cm from its surface. Distribute the coloring matter slowly, smoothly moving the can from one side to the other.
As soon as the tips of the villi are dyed, comb the fur with a brush to prevent further gluing and remove excess moisture.
In addition to hair dye and spray, at home you can use tinting hair shampoo.
This instruction on how to dye fur at home is for guidance only. It is also recommended to watch a video demonstrating the whole process.
How to dye faux fur
Having decided to dye a faux fur product, decide what color you want to dye it. Perhaps it just needs to be updated, giving it freshness.
You can color faux fur with hair dye. If you need to update the color, use permanent hair dye. If you just want to freshen up the color, use a tinted hair shampoo or spray.
Before dyeing, it is recommended to clean the faux fur from traces of grease and dirt, which most often arise from contact with the skin. If the fur is not pre-cleaned, the dye may be unevenly distributed.
To clean faux fur at home, it is enough to use an ordinary soapy solution, which can be applied with a sponge.
When you start painting, make sure that the color you choose will fit well. To do this, apply paint to the pile from the wrong side of the product. If you are satisfied with the result, feel free to start painting the fur.
Important: prepare the faux fur product by laying it flat on the surface and pulling it along the edges, otherwise the fur will be stained with shreds.
When dyeing artificial fur, strictly follow the instructions for hair dye.
After the time specified in the instructions comes out, wash off the paint. What's more, you can hand wash the product without using powder or shampoo. Just do it without fanaticism!
While still wet, faux fur should be combed and allowed to dry, and after it is completely dry, it should be combed again.
Instruction
If the fur is very dirty, it should be cleaned with an alkaline solution. Dyes do not penetrate well into the structure of dirty or greasy hair. The cleaning solution is prepared from salt - 2-3 teaspoons, ammonia - 1 teaspoon, detergent - 1 teaspoon, baking soda - 2 teaspoons, per liter of water. Apply to the fur with a brush. Washed and dried naturally.
The skin from the inside of the fur - the mezdra - must first be treated with a greasy cream or glycerin to prevent it from drying out.
We paint the fur for the usual. We apply paint. Pre-fur can be moistened with water so that the paint is distributed more evenly. You need to work so that you can rub the paint with your hand and avoid unpainted places. By the time we keep, as indicated on the box, depending on the color.
After that, rinse the fur in warm water, with the addition of vinegar. Dry carefully with a towel.
Related videos
Natural fur always up to date. In such a fur coat, it is easiest to survive the harsh Russian winter. Mink products are rightfully considered the most stylish, elegant, chic. Sometimes it becomes necessary to dye a mink coat.
Instruction
Fur is good because in its structure and appearance it is very close to human hair. Therefore, many people color it with hair dyes. Get the kind of paint that you have already tested once on your own. If you liked it for its qualities and durability, then it can also be used for dyeing natural fur.
Paint the fur coat with an aerosol or spray gun. Perform the procedure at a distance of approximately 50-70 cm from the fur. Moreover, be sure to rub the product with a comb or. Thanks to this, you will not only remove excess paint, but also distribute it more evenly.
Now dry the fur. Do this very carefully and slowly. For these purposes, you can use a hair dryer. Comb the fur itself constantly. This is necessary so that in the future it does not get tangled and does not fall off.
Some women, in order to add shine to the fur and soften it, are advised to use a good hair balm after such a procedure.
Related videos
note
An alternative to self-dyeing natural fur is to contact a dry cleaner. But all such establishments will undertake this work.
Helpful advice
Experts recommend using Fara or Prestige paints for painting mink fur. They are best suited for these purposes. The color can last up to eight months, after which it will only fade slightly. True, for mink, the choice of shades is very limited: red, chestnut or black. It is worth noting that the most resistant color is red paint. And everyone's favorite black eventually turns into brown.
You can carry out screen staining. Due to this, the mink can acquire the color of a leopard.
Sometimes it happens that a fur product can last for many more years, retaining warmth and beauty, but its color has become such that you can no longer afford to wear a fur coat or hat. Sometimes the fur fades, becomes stained, sheds, and sometimes its color simply bothers the owner. If the color of the fur coat does not satisfy you, this is not a reason to get rid of the thing. You can try to change the color of the fur yourself by dyeing it at home in the desired color.
Instruction
When choosing a dye for fur, buy only the shade that is darker than the one that is already dyed with the fur of your item.
It is possible to paint the product only in stainless steel barrels or in special plastic tanks, using tinting agents or oxidizing dyes. The easiest way to dye a fur coat is oxidizing, as they are inexpensive and allow you to dye the fur at lower temperatures, resulting in a beautiful sheen.
If the fur is old, it may not survive the operation. Dirty and soiled fur products are also poorly dyed - thoroughly clean the fur before dyeing. Prepare a solution from a liter of hot (35-38 degrees) water, dilute 20 g of salt in it, 2-3 g of ammonia 25%, and add a gram of detergent or shampoo and a gram of baking soda. If more solution is required, increase the amount of ingredients in proportion to the amount of water. For two liters, take twice as many ingredients, for three liters - three times as much. With the resulting solution, stain the skin until it is ready for painting.
Related videos
You can change the color of the skin of a particular product in domestic conditions. However, it must be taken into account that the effect will not be the same as with industrial painting. Staining is deep and superficial. Deep staining involves immersing the skin in a dye solution. For surface staining, use a brush or spray.
You will need
- Dye powder, water, basin, vinegar, salt
Instruction
Remove impurities from the skin. Decide on a skin coloring method.
Dilute the dye powder with warm water and mix thoroughly. Next, strain the mixture. This is necessary in order to prevent the appearance of lumps that form spots on the painted area.
Pour the dye into a saucepan, pour two liters of water and boil. Then remove the dye solution from the heat and cool to 45 degrees. If the solution has a higher temperature, the skin will shrink when interacting with it, lose strength and elasticity.
soak skin in warm water for a few. The skin should get wet well, otherwise the wet areas will remain unpainted. It is possible to determine whether it is wet enough by a string of bubbles, which, when not sufficiently moistened, are released from the pores.
Pour the dye into a bowl that will allow you to easily hold. Remove the skin from the water, wring out and place in a bowl with a solution. The surface must be completely covered with dye. In addition, from time to time the product must be turned over. This will allow the paint to lie evenly.
Fix the paint. To do this, prepare a solution. Take one liter of water, a glass of vinegar and one tablespoon of salt. Mix the ingredients. Place skin into this solution.
Wring out and lay the product on a wooden board face up. Soon the product will dry and will please you with an updated appearance.
Fur products made of polar fox not only look great, but also perform their main function - keeping warm. The pile of fox fur is long, so it accumulates both dust particles and substances from the environment, which give yellowness. Not very strong pollution can be cleaned, but with persistent ones you will have to visit a dry cleaner, because you can’t use aggressive products on delicate fur.
Instruction
Take bran or flour and heat a little in a pan. Quickly sprinkle the hot mixture on the fur and brush with a soft brush. A fur brush can be purchased at a household supply supermarket or even a regular pet store. After you remove the flour from the product, shake it. It is better to do this procedure on the balcony or on the street if you live in a private house.
Dilute vinegar in water 1 tbsp. spoon for 200 ml of liquid. Moisten a soft cloth and wipe the fur over it. Then use clean water, but do not wet the product too much. If you cleaned, put it on a three-liter jar to dry, and hang the coat on a coat hanger until completely dry. Do not forget to shake the fur periodically, otherwise it will dry out and become not fluffy.
You can clean the fox with aviation gasoline. To do this, soak a sponge in the liquid and gently wipe the fur. Wait until the gasoline has completely evaporated. Then rub the usual potato starch and after 10-15 minutes thoroughly shake the fur in the fresh air or vacuum it on the weakest mode (preferably with a machine vacuum cleaner).
If the product is no longer there and the question “throw away or clean” is acute, then there is nothing to lose and you can try to wash the product. Pour warm water into a basin, add liquid powder and soak the fur in the resulting solution. The stronger the contamination, the higher the concentration of the powder should be. Then rinse thoroughly and dry the product. Usually, after such a procedure, the appearance improves, and the pollution disappears. If the skin has become tough, just rub a small amount of aviation gasoline into it.
Related videos
Helpful advice
If you are afraid to ruin the fur, contact the professionals. In the dry-cleaner, the contaminated fur will be cleaned using gentle products and modern technology.
Fur mink in the modern world is becoming more and more popular, even despite its high price. In some countries, there are specialized mink farms. Fashionistas and adherents of natural furs explain that it is in a natural fur coat that it is easier to survive the winter and cold weather. Mink coats are popular because they are the most durable in their use. Sometimes there are times when you need to dye or recolor this piece of your wardrobe in a different color to freshen it up. Of course, to dye the fur mink independently without certain skills, you must be extremely careful so as not to spoil the thing.
You will need
- - mink fur,
- - dye,
- - aerosol.
Instruction
It is recommended to paint with a spray gun or aerosol at a distance of about 50-70 cm from the fur mink and be sure to rub or comb, because this way the paint is distributed more evenly and the excess is removed.
Products made of natural fur are always a priority for women, because it is beautiful, expensive and prestigious. But what if something happened to your favorite fur coat, it burned out in the sun, or paint got on it? It doesn't matter - after all, it is quite possible to dye natural fur even at home. In order to dye natural fur, you will need the most common hair dye. The choice of color palette in this case is not limited: from fiery red to jet black. Just remember that after such dyeing, the color of the fur lasts up to eight months, after which the red fades and fades, and the black turns into dark brown and gradually turns red. You can also try to lighten the fur, but the result can be very unexpected: the muskrat becomes soft peach with a white undercoat, and the beaver turns yellow.
Before painting, it is worth doing a little preparatory work. Mezdra (the lower layer of the skin) should be soaked with a fat cream, thus protecting it from drying out. Apply the paint to pre-moistened fur - the color will look deeper and lie more evenly. If you do not want to radically change the shade of the fur, then you should generally dry it a little - the color will turn out to be less intense.
After applying the paint, carefully remember the fur with your hands, rubbing the dye over the entire surface. Make sure there are no unpainted spots left. Leave the product for the same time as when dyeing hair, that is, 30-35 minutes.
After holding the right time, wash off the paint under a powerful jet of water. You can keep the skin for a few minutes in saline so that the color lasts longer and the hairs shine in the sun. Gently wring out the fur - you can lay it out on the bathroom wall and intensively run your hand over it several times.
Then lay the skin out on a surface to dry. It is better to let it drain and dry on its own. Comb the fur, setting the desired direction.
Advice from Osinka.
Skin coloring. Cheap skins, with appropriate processing and coloring, can look like expensive furs. Previously, the coloring of furs was a very complicated matter: it was done using various mordants from chromium, iron and copper sulfate, etc. The introduction of aniline dyes into practice greatly simplified production, increased the color strength and the range of shades obtained.
When using aniline dyes, the color appears on the fibers with the help of oxidizing agents, such as: sodium perborate, hydrogen peroxide, etc. Sodium perborate is more convenient than hydrogen peroxide, it does not decompose so quickly and is cheaper.
2. Aniline paints for skins. Skin coloring can be done in two ways. According to the first method, the entire skin is immersed in a dyeing bath (dipping dyeing), according to the second, the dyeing liquid is brushed onto the hair (pointing).
If the skins are rich in fat, then before coloring they should be treated with the following mixture: 500 g of slaked lime, 250 g of iron sulfate, 150 g of alum per 10 liters of water. Apply the mixture with a brush, after which the skins are dried and washed well several times in water. Thanks to this treatment, the hair is degreased and it takes color more easily.
For skins less greasy, you can use a solution of soda (6 ° B.) and soap for washing. The use of caustic soda should be avoided.
One more piece of advice.
First of all, we process the mezra as follows. We apply ordinary glycerin (so that not too much and not too little) to the surface of the mezra carefully so as not to touch the villi of the fur along the edges. We buy ordinary hair dye of the desired color (I note that the colors when painting light fur completely correspond to the palette of colors) henna - there will be red fur, basma-dark green. When the glycerin is slightly absorbed, we take a board and pin the fur around the perimeter with sewing pins, and paint according to the instructions attached to the selected paint. and dry it with a hairdryer. Done! If you want to make spots of a different color, then wrap the painted places in foil, there will be a beautiful spot.
Painting advice.
I am writing at the request of workers on the eve of winter.
We paint the fur, in my case there was a collar.
The coloring technology is simple - we rip off the collar - so that there is only fur, without fabric, etc.
We take hair dye - I took a black phytolinium garnier (gave the best result), we dilute the paint - the whole bottle went to my large collar, and we apply paint on a board dressed in a plastic bag with an old toothbrush.
There is such a catch - the fur is thick, the arctic fox, the mink is painted worse than the marmot - the undercoat is stained everywhere. It takes a long time and tedious to move the brush in different directions in order to evenly distribute the paint.
Leave for the time indicated on the bottle of paint. Periodically comb the fur with a brush, so that it would be taken more evenly.
Rinse off in the shower, apply (if any) balm. We wash off again. And then we prick the wet fur along the edge of the skin with needles on the board. We dry. I took it off the board when the fur was dry and the skin was semi-dry. In the process of drying, I combed it with a clothes brush. Then air dried.
At the end, it would be good to spread the mezdra with glycerin, or hand cream, or just sunflower oil.
And then - sew! smile
The main thing is not to dry it with a hairdryer, and not to let it dry without being stretched - my mink shrank after this, began to tear, in general - I ruined the fur.
But if everything is done well - my brown groundhog has become completely black, soft and smells like a pleasant balm.
Good luck!
Let's say your coat faded or you just got bored. Or maybe you just want to give your fur clothes a fantasy, unusual look? Or made fur? And you don’t want to go to the dry-cleaner in order to dye the fur? At home, try to do this by reading our tips.
DIY fur coloring
Usually, the fur is dyed in dark colors - black, brown or dark brown. Because then the fur defects will be less visible. In addition, this is the basic rule for coloring fur - you can only dye it in a darker color.
Don't worry - this procedure is no more complicated than
All fur dyeing operations are done only in special longboats stainless steel or plastic barrels. There are two main methods for dyeing fur:
- Dyeing with oxidative and acid dyes.
- Toning.
The first way is the most common. Firstly, it is cheaper, and secondly, the fur is dyed in this way at lower temperatures. Fur dyed with oxidation dyes has a greater sheen compared to fur dyed with acid.
Stores now have special sprays for coloring fur products. But you should know that such a method will inevitably stain everything that the fur touches. Below you will see a video where the craftswoman managed to work great with hair dye.
Important:
Before you dye the fur with your own hands, you need to check tannability of skins for welding temperature. The old skin may simply not withstand painting and fall apart during painting. The quality of fur dyeing largely depends on the ability of dyes to penetrate deep into the hair. The coloring solution does not penetrate well into the structure of greasy and dirty hair. To do this, you need to kill the skin.
Have you ever thought about how to dye fur at home. But surely every modern fashionista has a vest, a sheepskin coat or a fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or, perhaps, you will come up with the idea of changing the appearance of an old little thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, at an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about it in the framework of this material.
Preparatory activities
The success of the "operation" largely depends on how well the preparatory measures will be carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, respectively, the result of dyeing affects.
For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at the nearest pharmacy. All components must be thoroughly mixed with each other until a homogeneous mass is obtained. On the mezdra (bottom layer of the skin), to prevent drying out, apply a greasy cream, for example, for children. Then, armed with a brush with hard bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.
What to paint?
If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.
So, for dyeing, you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with hard bristles.
fox fur
How to dye fox fur at home? Luxurious vests made of fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of the fur product. So why not take advantage of this opportunity?
Deciding on a shade
If you do not know how to dye natural fur at home, in particular fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.
Let's start coloring
For maximum results, wet the fox fur with water, then proceed to apply the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.
Mink
Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be approached more demandingly. The same hair dye is perfect, but it is better to give preference to a professional series that will give the most natural natural shade, and it will last much longer than budget counterparts. But some recommend using spray paint. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layer paint - this technology will allow you to achieve an expressive and deep noble shade.
If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In everything, the dyeing procedure completely repeats the procedure for transforming fox fur, described above.
Mouton fur
This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of mouton fur gives. But not everyone knows how to properly care for the fur, which is why, with time of operation, there is a need for additional dyeing.
Mouton products are rightfully one of the most unpretentious, but speaking of staining, you should be patient, be extremely careful and accurate. Since how to paint fur at home with paint in the case of a muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.
And one more thing: before dyeing, test a small amount of pigment on a small section of the fur product - in case of spots and bald spots, it is better to abandon the idea of \u200b\u200bself-dyeing and entrust it to professionals.
Artificial fur
Do you think only natural fur causes admiration and admiring glances of others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of fashion, beauty and luxury upside down. If you have a jacket or bag in this material in your wardrobe, update them with dyeing. Want to know how to dye faux fur at home? We will tell you about it.
The same hair dye is suitable for dyeing - in the case of faux fur, you can experiment, give preference to brighter, more acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.
In order to get the perfect result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.
Summing up
We tried to figure out how to dye fur at home, and gave some of the most effective ways. With the proper approach to the procedure, the use of high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.
