How to connect wired Internet. Connecting DHCP and Fixed IP

How to set up internet on windows 7

Today, the Windows 7 operating system is used by more and more users. Compared to Windows XP, the seven is not much different and, in principle, if you know XP well, you can work in the new Windows 7 without any problems. But still, despite the fact that this OS is very similar to Windows XP, there are still some differences in it. In today's article we will look at setting up an Internet connection in Windows 7 and using an example with screenshots we will learn how to set up the Internet on this system.

Instructions for setting up the Internet in the Windows 7 operating system

Before you start setting up an Internet connection, you need to install drivers for your modem, network card or other device with which you access the Internet. And only after the drivers for the necessary equipment have been installed, you can proceed directly to setting up an Internet connection. First you need to launch the Control Panel, to do this you need to click the Start button and select Control Panel:

You will see the Computer Settings window, in which you need to switch the view by category:

After that, in the list that appears, select “Network and Sharing Center”:

In the “Network and Sharing Center” you need to select the “Set up a new connection or network” item:

At the next stage of installation you need to be careful! Here the operating system prompts us to select an Internet connection option. If you are using an ADSL connection, then you need to select the first item: “Connect to the Internet.” If you use, for example, 3G Internet, then you need to select the item “Set up a telephone connection.” Select the option you need and click “Next.” I chose the first option:

In the next window we just need to click on “High-speed (with PPPoE)” (If you are setting up 3G Internet, then at this stage you will see a modem selection window):

After this, you need to enter information from your Internet service provider. Here we write the username and password. If you are setting up 3G Internet, then you will have one more additional field “Dialed number”. After the data has been entered, click the connect button:

If everything is configured correctly, you will see the message: “The Internet connection is ready to use”:

The next step internet settings on windows 7 will create a connection shortcut on the desktop. To do this, again go to the control panel -> Network and Sharing Center and click on the item “Change adapter settings”:

In the window that appears, right-click on the created connection and select “Create shortcut”:

Now click on the “Yes” button, thereby confirming the placement of the shortcut on the desktop:

How to change network card settings in Windows 7

As you all know, an Internet cable today is most often connected to a network card. The fact is that sometimes in order to properly configure the connection it is necessary not only to install drivers but also to correctly configure the network card itself. To do this, you need to click on the “Change adapter settings” item in the “Network and Sharing Center” and in the window that opens, find “Local Area Connection.” On this connection, right-click to open the menu and select “Properties”, you have The following window will open:

Here you need to highlight Internet Protocol version 4 (TCP/IPv4) and click the properties button. A window will open in which you can enter the IP address, subnet mask, default gateway and other settings.

Possible problems when setting up the Internet on the Windows 7 operating system

If you did everything correctly but for some reason the Internet does not work on Windows 7, then you should check the following:

• Hardware drivers. Once again, you need to check that the installed hardware drivers are correct.
• Firewall settings (often included with antivirus programs). The fact is that when you create a new Internet connection, the firewall installed on your computer recognizes it as a new network and can block it. Therefore, you need to check your firewall settings and change them if necessary.
• It is also a good idea to check your computer for viruses. The most effective way would be to check your PC using 2-3 of the most popular anti-virus programs.
• If none of the above points gave a positive result, then you can repeat all the Internet setup steps again.
• Check the functionality of the equipment (modem, network card) on another computer or another operating system.
• You can study the article on how to set up the Internet on Windows XP. This article is located

A laptop has long ceased to be a luxury - it is a tool for work, relaxation and entertainment. Many have already appreciated and fallen in love with this wonderful device; for some, it has become a full-fledged replacement for a desktop PC.

If you connect your laptop to the Internet, it will be able to reveal its potential even more. And this makes me happy. Today we will look at several options for “how to connect a laptop to the Internet.” Are you ready? Let's begin.

Option 1. How to connect a laptop to the Internet using Wi-Fi.
This is one of the easiest ways to connect. Most modern laptops are equipped with a Wi-Fi module. If you are within range of a Wi-Fi network, you can connect in the following way:

• Turn on the Wi-Fi module on the laptop;
• Go to Start/Connection, find and click Wireless network connection;
• Select the network to which we want to connect;
• Double click on the selected network - and we are connected. If the network is protected, you will need to enter a password (check with the administrator/owner of the network);
• When a connection is established, you get full access to the Internet.

If there is no Wi-Fi module, it is possible to purchase and install a miniature USB Wi-Fi module that can become a full replacement for missing/non-functioning equipment on a laptop.

Option 2. How to connect a laptop to the Internet using a USB modem*.
Nowadays, USB modems are “popularly loved”, with the help of which you can access the Internet. This access option is interesting if there is good coverage and adequate prices in the tariff plan. If you wish, you can find providers that provide mobile Internet complete with a 3G modem. Depending on your equipment and service provider, the connection procedure may vary.

In some cases, providers set up a connection for free in their service center; sometimes you can find special programs that automatically install hardware drivers, create a connection and configure Internet access parameters. It is possible that you will have to connect and configure the USB modem yourself. How it usually happens:

• Insert the SIM card into the USB modem;
• Insert the USB modem into the USB port on the laptop;
• The system will detect a new device (you need to select a language during the installation process);
• We agree to the License Agreement and the installation location of the program;
• After installation is complete, click “Finish”;
• The program will start automatically. If not, start in manual mode and enter the PIN code (written on the card for the SIM card);
• The program is ready to use. Click “Connect with...”. After creating the connection, we can use the Internet.

*Connection diagram may vary depending on the equipment used and the ISP (service provider).

Option 3. How to connect a laptop to the Internet via a cable using a network card*.
Let's imagine that experts who are engaged in connecting subscribers have already come to you. They ran the cable, checked for connectivity and plugged the cable into the network card connector. All that remains is to configure:

1. Go to the Start menu, then select Control Panel;
2. Find and click there, select Local Area Connection and double-click on it with the left mouse button;
3. Then select and click Properties, in the list we need TCP/IP Protocol, then click Properties again;
4. Finally we reached our destination. If the provider provides automatic settings, select “Obtain automatically” for the IP and for the DNS server. Clicking OK will complete the network card settings. All settings are complete. Welcome to the world of the Internet.
5. **If your provider does NOT provide automatic settings, select “Use the following IP” and manually enter the IP, Mask and Default Gateway.
6. The next step is to register the primary and alternate addresses for the DNS server;
7. After clicking OK, the settings made are saved. The Internet connection will be made automatically when you turn on the laptop.

*Descriptions of settings may vary depending on your service provider.
** Please check with your ISP (service provider) for the information required for setting up your network card.

Ignore the apparent complexity of the connection settings. After you make the settings at least once, everything will fall into place. After several trial connections, you can easily set up Internet access not only for yourself, but also for all your “technically hopeless” friends. Congratulations: now you know three answers to the tricky question “how to connect a laptop to the Internet.”

Today, it is perhaps impossible to find a socially active young city resident who does not have access to the World Wide Web. Recently, there has been an active dominance of Wi-Fi wireless communications, but if you prefer the good old wired Internet, connecting it will not be difficult.

Connection

To connect to the network, you first need to choose the most suitable operator.
Criteria for selecting a service provider operator:

• availability of access points near your home;
• reasonable connection cost;
• high communication speed at an affordable price;
• efficiency of technical support;
• other factors (discounts, bonuses, special offers, etc.).

Many people choose Beeline as their service provider. The technical support specialist will be able to connect wired Internet to your laptop after you leave a request over the phone, on the website or at the provider’s office.

Each laptop has a special slot (hole) for a network cable on the side, back or front. The network card, as a rule, is already built into the device. A cable is inserted into the slot, which leads to a distribution device, or SWITCH, located in the entrance, in the attic of the house or in a neighboring house. Typically, several cables go from a switch to different subscribers. This creates a local computer network that provides Internet access on all laptops connected to it.

Settings

But connecting the Internet to a laptop is not enough to enjoy the unlimited benefits of the World Wide Web. After you place the cable in the slot, you need to configure it. And if the first action cannot be performed independently, then even a novice user can easily cope with the second.

Let's look at the basic principles using the example of setting up Beeline Internet on a computer with the Windows 7 operating system.
Procedure:

• Click the "Start" button and go to the "Control Panel". In the window that appears, select “Network and Internet”, then click on “Network and Sharing Center”.

• Select "Set up a new connection or network."

• Click “Connect to a Workplace” and then “Next”.

• Select "Use my Internet connection (VPN)"

• In the place where you need to enter the Internet address, write tp.internet.beeline.ru, and in the place where you need to enter the destination name - Beeline. Then you need to check the box next to the words “Do not connect now, just install to connect in the future” and click on “Next”.

• Next, you should enter your username and come up with a password that you will enter to connect to the network.
• When the process is complete, click the Close button and return to the Network and Sharing Center. There, click on the item on the left side of the screen “Change adapter settings”.

• Right-click on the created Beeline connection, go to “Properties” and make sure that tp.internet.beeline.ru is written in the address bar of the VPN server.
• After that, go to “Options” and uncheck the box next to “Include Windows login domain.”

• Go to the “Security” tab and expand the VPN Type floating list. Select L2TP IPSec VPN from it. Check the box next to “CHAP Password Verification Protocol” and click “OK”.

• To go online, click on the Beeline connection shortcut and enter your username and password.

As you can see, setting up Beeline Internet on a computer is not so difficult, so you have a real chance to save your own money and gain new knowledge. Only a technical support technician who has access to the distribution equipment can connect to wired Internet, so you should not try to do this yourself.

As you know, a computer without access to the World Wide Web is not of particular interest. Almost everyone needs the Internet, but not everyone knows how to set it up. The procedure for connecting a laptop to the Internet is practically no different from a similar operation on a desktop PC. There are only a few methods that will be discussed in detail.

Connecting a laptop to wired Internet

Wired Internet has long become a common pleasure that many people have. This connection has both pros and cons. The access speed will be relatively high, but the laptop cannot be carried far with you, since the wire limits the distance. All settings are usually performed by wizards upon connection. You will also need to configure everything again after reinstalling the OS. To do this you will need to follow a couple of steps.

1. In the control panel, go to the “Network and Internet” tab.

2. Select “Manage networks...”.

3. Click the “Set up a new connection...” button.

4. Select “New connection”, then click on the 2nd option.

5. Now you will need to enter the information provided by the provider (login, password). Here you can set a name and attempt to connect. If everything is configured correctly, then the Internet should appear on the laptop.

Connecting a laptop to Wi-fi

The most convenient method. If you have a configured Wi-Fi router at home, you can connect your laptop to the Internet in just a couple of minutes.

Procedure:
1. Activate the wireless module on the laptop.
2. Open the “Network Connections” tab in the control panel.
3. Now you need to find a wireless connection and activate it through the menu (the “Enable” item).
4. All that remains is to select a specific point from the list and try to connect with it.

If you previously set an access password, you need to enter it. If the network is open, then you do not need to enter anything. However, you should definitely set up a combination to secure the connection so that no one can connect to it.

Connecting to the Internet using a modem

After purchasing a modem, the first thing you need to do is connect it to a free USB port. Usually all components are installed automatically. Once the software installation is complete, you can begin the setup process.

1. Go to the control panel, find “Network and Sharing Center...”.

2. You need to “Set up a new connection”, then click on the “Internet Connection” item.

3. A list of three options will appear, you need to click “Dial-up”.

4. Now you need to enter the information that was provided by your service provider and complete the setup process.

Setting up a connection on a laptop is very simple, but you must first decide on the connection method. It is very convenient to use a Wi-Fi router, as you can connect not only a computer, but also a smartphone.

Over the past 10 years, the Internet has rapidly entered our lives and into every home where there is a computer.
Now, not a single user working at a computer can imagine it without an Internet connection. After all, you can find almost everything on the Internet. Watch movies, sports broadcasts, listen to music, play online games. Find the information you need on any topic and download it.

Order tickets for a train, plane, concert, sporting event, pay for communication services, utility bills, buy something you like in the online store.
In a word, the Internet is a very good and useful thing. That's why he's so popular.

To connect your computer to the Internet you must have:

- installed network card and drivers for it.
- Adsl Modem, router, access point, etc.
- Ethernet cable
- Cable for connecting to an RJ-45 telephone line.
- Splitter.

And most importantly, the Internet access service must be provided by the provider.

Connect all cables to the computer and modem according to the instructions.

Let's get started setting up a network card AndInternet connection on Windows 7. To do this, follow these steps step by step. Step 1. Click Start and go to Control Panel. Click on the link.

Step 2 . Next click on.

Step 3. In the left menu of the window, click.

Step 4 . Right click on the iconLocal network connectionand in the menu that appears, select Properties left mouse button.

Step 5 . In the window that appears, select the item with the left mouse buttonInternet Protocol version TCP/IPv4and click on the button Properties .

Step 6. Select an item Use the following IP address, and fill in the fields as shown in the picture. Addresses forPreferredand Alternative DNS servers you must take from the contract for the provision of Internet services. After that, click the button OK.

The network card setup is complete. Next, we proceed to create a new connection.

Execute Step 1 And Step 2 again.

Step 3. In the block Changing network settingsclick on the link.

Step 4. In a new window select connection optionInternet connections. This is a wireless, high-speed or telephone connection to the Internet. Click to continue Next.

Step 5. In the window Internet connection select High speed (with PPPoe). Connection via DSL or cable, requiring username and password.

Step 6 . In the next window you need to enterinformation received from your Internet service provider:

Username.
- Password.
- Connection name.

All this data should have been given to you when concluding the contract.

Check the boxRemember this password.

You can allow other users to use this connectionby checking the appropriate box.

After entering all the data correctly, click the button Connect.

Step 7 . The connection should be established after verifying the username and password. After this, a window will appear in which the system will notify you thatInternet connection ready to use. To exit, click on the button Close.

In order to connect to the internet, in the window on the right side of the window click on the link. Then double click on the iconHigh speed connection.

In order not to constantly go to the control panel to connect to the Internet, you can create a shortcut on the desktop. To do this, right-click on the connection icon and select from the context menu Create a shortcut.