Every year, how to connect Wi-Fi at home without outside help becomes more and more relevant. It is almost impossible to imagine our life without such wireless technology. Its transmitters are already in every second apartment and, most likely, the percentage of their distribution will increase. It is not entirely justified to call a specialist to perform such a simple operation and pay him money. There is nothing complicated in it, even a novice user can handle it. Everyone can figure out how to connect Wi-Fi on their own.
Switching
First you need to do all the necessary switching before switching on. First, if you need to install such a transmitter on a stationary PC, then we connect it to the USB socket of the system unit. Then you need to install drivers for it. They come with it on CD. Next, install the router. We bring a wire from the provider to it and install it in the input connector (it is usually of a different color). We connect the power supply to the router socket and the socket. At the final stage of how to connect a Wi-Fi router at home without outside help, you need to install a meter-long twisted pair cable that comes with it in the kit, install it in any remaining free connector on one side. And we connect its second connector to the network board of the system unit or laptop.
Setting up the router
Now let's figure out how to connect Wi-Fi programmatically. This is the most difficult step in this operation. But if you take your time and do everything consistently, then there will be no problems. First, in the computer connected to the router, put
CD that came with it. After launching it, a quick settings window will open. Then we turn on the network device with the power switch, which is usually located on its back side. After that, you need to wait for the time required for it to load - 30 seconds is enough. Now back to the connected computer. In the setup wizard window, click Next. The next step is to enter your login and password for access. Then the time and date are entered (not all routers have this, so this step may not be present). At the final stage, we configure the network connection settings. Its external part is configured according to the documentation provided by the provider (network address, subnet mask, and other parameters). This information is specified in the contract. We customize the internal segment at our discretion. It is recommended to set a dynamic address and protection according to the WPA2 standard. If necessary, then disconnect the router from the PC, after turning everything off.
Software connection
At the final stage of how to connect Wi-Fi, we set up the computer. To do this, we find the icon of wireless networks in the right corner of the screen and double-click on it with the right mouse button. In the list that opens, we find the name of ours, which was entered in the previous step. In response to our request, you will need to enter a password to connect. After that, the PC must receive the address, and then it will be possible to visit sites and blogs from the global web.
conclusions
It is difficult to imagine the life of a modern person without Wi-Fi. How to connect and configure a computer or laptop based on the Windows OS to such a device is described in this article. There is nothing complicated in this algorithm, everyone can easily cope with this task.
Nowadays, wireless technologies allow you to create a whole home network, which will include all mobile devices and computers equipped with Wi-Fi adapters. Everyone potentially has such opportunities, but not everyone knows how to connect Wi-Fi at home.
What you need to organize a home network
In this article, I will tell you what you need to connect Wi-Fi at home.
First, you will need a wireless router or access point. Secondly, in order to connect a computer to the router, a Wi-Fi adapter must be installed on the second one. It is worth noting that every modern laptop, netbook, smartphone and tablet is equipped with Wi-Fi and Bluetooth wireless modules, so there should be no problems with creating a home network from this side.
Today, absolutely everyone can buy a wireless router, since their cost is within the power of any budget. However, if you do not want to spend money on a router, you can create a distribution on a computer or even on a smartphone; if you create an access point on your smartphone, then you can only access the mobile Internet, and then if it is connected and configured on the distributing device.
Here I will describe how to act if you decide and purchase a router.
How to organize a local wireless network
Consider how to set up a local network through a Wi-Fi router, using the D-Link Dir-300 router as an example. If you have a different model, then do not be upset. They are all set up the same way. The difference between the routers is only in the design of the interface and the names of some sections. Otherwise, the essence of the work remains the same for everyone.
So, turn on your router and wait for it to boot up. After that, you can connect to it via Wi-Fi or via the cable that came with the device. Next, open your favorite browser and enter the IP address of the router in the address bar. It is indicated on the factory sticker, which is pasted on the device itself (just carefully inspect it from all sides). On the same sticker you will find information about the login and password to enter the options menu.
If the sticker is missing or erased, then you can find out all the necessary data in the instructions. If none of the options suits you, then after connecting to the router, launch the command line and write the following command in it: ipconfig and press "Enter". It remains only to find the line "Main Gateway" - this will be the address of your router. As a rule, the following IP address is used on T-Link and D-Link: 192.168.0.1. Sometimes there are routers with the following address: 192.168.1.1.
So, we prescribe the IP address already known to us in the browser and press "Enter". Now the system asks for a password and login to enter the options menu. By default, in the vast majority of cases, the following data is used: login - admin, password - admin.
Everything, now you are in the router settings menu. As mentioned above, to create a local network, you do not need to configure anything in particular. You can simply enter the name of the network and also secure it by coming up with a complex password. To do this, go to the "Wi-Fi" section.
In the main settings, you can enter the name of the router. To do this, find the line "SSID" (or username) and enter in it any network name you like.
A little lower you will see the line "PSK Encryption Key". This is the password to connect to the network. You can enter here absolutely any password of your choice. The main thing is not to forget it later, because without this key you will not be able to connect to Wi-Fi.
Of course, there are still a lot of settings, but, as a rule, no one uses them, since for the network to work normally, it is enough to specify a name and set a password. Now you know how to install Wi-Fi at home yourself.
But, if you have cable internet, you can connect it to a router. This will allow you to distribute the Internet via Wi-Fi. Of course, this connection also requires a separate setup.
WAN setup in the router
WAN is a global area network. Simply put, this is the Internet. If an Internet cable from the provider is laid in the apartment (house), then you can connect it to the WAN port of the router (RJ-45 interface). Of course, you will also need to enter certain settings in the router itself. To do this, go to the "Network" section in the router settings. Next, go to the "WAN" subdirectory.
Click the "Add" button below. In the line "Connection Type" you need to specify the type of connection that your provider provides. There are three options to choose from:
- PPPoE is a connection to the Internet using a unique login and password that the provider issues when connected.
- Static IP - in this case, you will have to manually enter the network settings. That is, the provider gives you certain network settings that you must enter when setting up the connection. This data is usually specified in the contract concluded with the provider. But you can call the customer support service and ask the operator for all the necessary data.
- Dynamic IP - This option sets the network parameters automatically. It works only if the provider provides such services and supports the technology of connecting clients by MAC address. That is, instead of a login and password, a unique number is used - the MAC address of your network card (or router).
As a rule, in the vast majority of cases, the first option is used - PPPoE connection using the client's login and password. Therefore, in the "Connection Type" line, set the value to "PPPoE".
Additional settings will open below. We are interested in the PPP section. It only needs to fill in three lines:
- "Username" - here you need to specify the login that the provider assigned to you.
- "Password" - enter the password assigned to you by the provider.
- "Password Confirmation" - here you need to enter the password again.
If you are provided with an IPTV service, and you will watch TV on a computer or on a TV with a Wi-Fi adapter, then check the box "IGMP". After that, click "Apply" and reboot the router.
This completes the router setup. All devices connected to it will have access to the global web. In this case, they will all be in the same homegroup. Thanks to this, you can transfer information between devices in a group, transfer files, and so on. To do this, you just need to set up sharing and open access to the necessary resources.
Here, now you know how to conduct Wi-Fi in an apartment. However, there are other options.
For example, if you have a laptop, then you can distribute Wi-Fi from it. Moreover, if you connect a laptop to the Internet, then your virtual network will have access to the Internet. The easiest way to organize the distribution of Wi-Fi on a laptop is to use the Virtual Router Plus program.
The program is free and extremely easy to use. I think you will understand its settings. You can learn more about how to distribute Wi-Fi from a laptop from this article.
You can also distribute mobile Internet via Wi-Fi from a smartphone. To do this, you just need to connect to a 2G or 3G network on your phone and activate the "Mobile hotspot" function in the Wi-Fi settings. You can find out more about this.
How to set up a local network through a Wi-Fi router: Video
The technology of wireless Internet networks has become quite dense in the life of a modern person. We constantly hear such words as wi-fi, router, 3G, and others, one way or another connected with Internet technologies. The Internet is used almost everywhere: in shops, in transport, in cafes and restaurants, in public places equipped with wireless access points, but with a little effort, you can organize home wifi internet to be able to connect to the Internet of any available device anywhere in the apartment. This is not at all difficult to do, and with some skills, time will be spent in just a few minutes.
Features of organizing a wireless network
Usually, when connecting to a WiFi access point, it is considered that a connection to the global network and access to the Internet will be made. This is not entirely true. A wireless connection is the same association of computers or other devices in a local area network, as well as using cables. The only difference is technology. Naturally, combining home resources with the resources of an Internet provider and accessing the Internet will be an additional advantage, but this is far from the only scope for home WiFi. As an example, when using home wifi only for internal needs, this is the organization of a media server that stores movies, music or photos, and to which all users of the home network can connect for viewing.
In order to make a wireless network for the home, inexpensive access points or Wi-Fi routers are usually used. When setting up a wireless network, there are several factors to consider:
- data transfer rate within the network;
- protection against unauthorized access;
- the range of the access point, i.e. transmitter power;
- location of the access point in the apartment.
Given these factors, you can organize a wireless network anywhere with maximum efficiency. A very important point is the correct location of the transmitter in the room. If a wired network is organized, then each device or computer is connected via wires, and only their quality and length affect the connection speed. Wireless networks are a bit more complicated. The radio signal is transmitted over the air, and interference may occur during its propagation. These interferences depend on the material and thickness of the walls, on the finishing material, on the power of the transmitter, interference can also occur from objects in the apartment.
The optimal location for the router is approximately in the middle of the apartment and as high as possible to the ceiling. Usually this place is in the corridor, at a point equidistant from the rest of the rooms. Such placement will provide the most uniform distribution of the signal over the entire area. Of course, you can put the router on a table or a system unit in one of the rooms, but then you should not expect that the signal will be the same power throughout the apartment.
The speed of information transfer in the network depends on the selected WiFi standard - 802.11b/g/n. Modern models of routers and mobile devices support all communication standards. In the standard with the index n, the speed will reach 150 Mbps under ideal conditions. But it is also worth considering the fact that if a client that does not support the n standard connects to the router and works, for example, on 802.11g, then automatically all devices on the network will switch to work in this mode, i.e. will operate at speeds up to 54 Mbps.
Connecting and configuring the router
Usually, almost all Internet providers provide their customers with wired Internet access. This means that a twisted pair cable is laid from the provider's managed switch to the client's apartment. In this case, the function of the provider is only to provide access to the Internet or to the resources of its network. Not many providers help their customers with setting up routers, organizing a home network, or such services are done on a paid basis. Actually set up home wifi internet easier than it seems. To do this, you need to adhere to the following algorithm, which is suitable in most cases:
- Internet access is configured according to the settings issued by the provider;
- Internet television (IPTV) is configured if the provider provides such a service;
- wired connections are configured (by and large, only internal IP addresses change if desired);
- the wireless connection is configured by specifying the access point ID and security settings;
- changing the password to enter the router configuration page;
- access policies are configured, such as port forwarding, access to resources and various servers.
The settings of each router are purely individual, but the operation algorithm described above is suitable for each of them. If the router is not new, but has already been used for connection, then before setting it is necessary to reset the installed configurations to the factory settings. On each router, this is done by pressing and holding the "Reset" button for 10-15 seconds. This button is located on the rear panel, where the connectors for connecting cables are displayed. On some models, the reset button may be located on the bottom. To understand whether a configuration reset has occurred, it is enough to pay attention to the power indicator on the front panel. It should blink frequently.
If you are not sure which address in the browser you need to enter in order to get to the settings page, just turn the router over and “peep” this information. A plate or sticker is attached to the bottom without fail, on which the address of the router, username and password for access are written. There is also information about the device address, which may be required if the provider filters clients by MAC. Detailed router settings with specific configuration examples can be found on the Internet or on this site.
Nowadays it is impossible to imagine life without Wi-Fi. Most of us use several devices to access the Internet, often at the same time. Downloading a movie, choosing something in an online store and at the same time chatting with friends in a messenger is a common thing. How would we manage without WiFi? No way! Connect to the Internet without Wifire wires and forget about all the inconveniences of a wired network connection.
It's no secret that wired Internet is significantly inferior in comfort to connecting via Wi-fi. Let's look at the main advantages of wireless internet.
- Access to the network within the range of the router (up to 50 meters indoors)
- Ability to connect multiple devices at the same time (PC, laptop, smartphone)
- Convenience - Internet without extra wires
Connect the Internet without wires at a speed of 50 to 300 Mbps and get access to the network anywhere in your apartment! We offer high speed and stability of connection, favorable tariffs and technical support 24 hours 7 days a week. To connect to the Internet without wires at home, you can buy or rent a high-speed router. When connecting to the Internet without wires, use, as well as combine tariffs and save with Wifire!
How to connect to the Internet via Wi-Fi?
What do you need to connect your home Internet without wires in Moscow? Just choose a tariff, a router and leave a request. We offer two equipment options.
Router "Wifire S1010 NBN" and "Wifire S1500 NBN". Excellent technical specifications, cloud storage via USB, operation in the 2.4 and 5 GHz bands and an affordable price are some of the main advantages of Wifire equipment.
You can buy or rent a router - from only 55 rubles / month. Our experts will conduct the Internet, professionally set up Wi-Fi equipment and advise you on any issues. Internet without wires is fast, inexpensive and convenient!
Connect the Internet without wires in the apartment and enjoy the benefits:
- Speed from 50 to 300 Mbps
- Tariffs from 400 rubles / month
- Powerful routers - you can buy or rent for only 55 rubles / month
- Attractive Service Packages and Digital TV
- Antivirus for all devices
- Top notch technical support
Enjoy the benefits of using the Internet without wires from a reliable provider! Connect all home devices to the same network - the speed and stability of the connection will always remain stable. Add a digital TV package to the Internet and watch your favorite programs in excellent quality without interference! More than 180 channels for children and adults, channels in HD format.
We have already connected more than 944 thousand clients to the Internet and other services. Leave a request and our specialists will contact you as soon as possible.
Question answer
How to connect the Internet via Wi-Fi, and how much will it cost?
Choose a tariff and leave a request on the website or by phone - we will do the rest ourselves. The cost of connection depends on the speed, as well as the availability of additional services.
Why should I choose Internet Wifire?
We offer competitive prices and high connection speed, round-the-clock technical support, and are constantly working to improve the quality of services. In addition, our company has received many prestigious awards in the field of telecommunications.
Tariffs and services of Net By Net Holding LLC may be changed by the operator. Full up-to-date information about tariffs and services - in the "tariffs" section or by phone indicated on the site.
