Juice bird feeder. Bird feeders - do-it-yourself options from ordinary materials (55 photos)

Birds experience great difficulties in finding food in winter. The ground is covered with snow, and the tree branches are frozen, so the birds are sorely lacking food. Because of this, most of the birds die. Everyone can help our smaller brothers and make a feeder that will be their salvation during the cold weather. It has been customary to feed birds in winter for a very long time and caring people do this every year.

We make our own feeder

Before you make a bird feeder with your own hands, you need to consider that you will have to fill it regularly as the food runs out, as the birds will hope to be fed. You can use such a bird dining room not only in winter, especially if it is located on a garden plot. The food will attract birds, which, in turn, will partially rid the area around the house of midges and other harmful insects. In this article, various ways to make a bird feeder are selected.

Choice of location and material

Usually, when talking about bird feeders, many people think of a wooden house with a hole. This is the most successful form, as it will reliably protect the birds inside from bad weather, and will not become unusable during precipitation and strong winds, as it is very reliable and strong. But still, it is not necessary to make a wooden feeder, as now there are a huge number of options that can be implemented. It can be made from any material and any shape, the main thing is that the finished product met the following requirements:

• It was strong and durable enough to support the weight of several birds.
• It was weather resistant. You can often see small feeders made from juice bags or shoe boxes, but such a product will not last long, as rain or snow will soon render it unusable. If, nevertheless, there is no other material other than cardboard, you need to glue the structure made with adhesive tape, so it will be a little stronger and withstand adverse weather conditions.
• It was safe for the birds. After cutting the openings, especially for feeders made from a bottle, very sharp edges remain, which must be treated with electrical tape, polymer clay or other materials before hanging the feeder so that the birds cannot get hurt.

In order for the birds to see the dining room for them and constantly fly to it, you need to place it in a place convenient for them. This is usually a well-visible area. Don't place it where there are a lot of branches or where cats can get to.

Feeder Options

Now a do-it-yourself bird feeder can be made as fantasy requires, but if it’s difficult to come up with a convenient design on your own, you can use the following step-by-step instructions for making.

Plywood feeder

If at home there are several pieces of plywood stale after repair, then why not make an excellent feeder out of them. They come in various types with a flat or gable roof. But in order to feed only small birds that cannot get their own food, you need to make holes for them of such a size that larger birds do not eat all the food. It is imperative that for such a feeder it will be necessary to make a drawing in advance so that the finished design is as originally intended, and not to be mistaken with the dimensions.

After the drawing is ready, you need to prepare the tools necessary for work:

• jigsaw
• Sandpaper
• Nails of the right size
• Water based adhesive
• Plywood
• Small bars measuring 4.5 * 2 cm

The simplest plywood feeder is performed according to the following algorithm:

Details of the future product are marked on plywood and cut out with an electric jigsaw. The roof should be slightly larger than the bottom so that moisture from it does not flow onto the feed.

To prevent the occurrence of burrs and sharp edges, the cut points must be processed with sandpaper.

Racks about 30 cm high are cut out of a 4.5 * 2 timber. If it is planned to make a feeder with a flat roof under a slope, then 2 bars are made a few centimeters lower.

Assembling the structure:

1. We glue the racks to the bottom, and the sides to them.
2. We drive nails into the joints or screw screws.
3. We attach the roof from above.

The feeder is ready, now you can pour food inside and hang it in a convenient place. It is in no way inferior in quality to a wood product.

Another simple plywood construction is shown in the video:

Wooden feeder

Products for birds made of wood are the most common and convenient, so consider the process of making such feeders. To make a wooden feeder, you will need knowledge of the basics of carpentry, as well as material - boards no thicker than 2 cm.

To create the lightest model, you need to stock up on a bar for racks measuring 4.5 * 2 cm, plywood 25 * 25 for the bottom and two sheets of 35 * 22 for a gable roof, self-tapping screws, nails and wood glue.

Manufacturing technology is as follows:

1. We connect the bars 4.5 * 2 cm together to make a rectangle, and fasten it to the bottom with glue and self-tapping screws.

   Tip! Two sides can be made a little longer. This will allow you to place perches on them.

2. We fix racks in the corners.
3. We lay the rafters at right angles to the racks.
4. We fix the finished rafters with self-tapping screws to the racks.
5. We attach two pieces of wood in the form of a triangle to the rafters - this will be the roof slope.
6. You can make a skate if you attach a window corner.
7. If at the stage of manufacturing the sides, two of them were lengthened, then a perch was attached between them.

Advice ! To avoid splitting the wooden parts in the feeder, the tip of the nail must be made blunt, and holes must be specially drilled for self-tapping screws.

It is installed permanently on a wooden rail or suspended from a branch with a wire. Its design is such that up to 5 birds can feed at once, the food will not scatter from the wind, as it is protected by the sides, and will not get wet, since the feeder has a roof.

If the adjoining area has a gazebo, then inside it you can place a feeder without a roof. If desired, a wooden feeder can be coated with paint or varnish, but only water-based, to prevent bird poisoning.

A simple bottle feeder

A bird feeder from a plastic bottle is made very quickly and you do not need to have special tools for its manufacture. It is enough to take a five-liter bottle and cut holes in the form of a rectangle or arch on parallel walls. If you cut out only three sides of the hole, and lift the cut out part up and fix it, you get a beautiful visor.

All edges must be covered with adhesive tape or electrical tape so that the birds do not injure their paws when eating grains. You can make holes in the bottom of the bottle and thread a round stick through them, so the perch will come out.

You can attach such a feeder with a thick rope to a tree branch.

Feeders from a bottle with a supply of feed

The first option would be a bunker-type product. Its design is interesting in that the food will spill out on its own as it is eaten by birds.

To make such a feeder, you need to take two bottles of the same volume. We mark one bottle before cutting with a marker. It needs to cut holes near the bottom so that the birds can peck at food. We mentally divide the bottle into three parts and cut off one upper part completely, and just below we make holes for the rope parallel to each other.

The second bottle in the narrowest part at the neck is equipped with several holes so that food can then spill out of them.

Important ! Do not make holes too large for pouring feed.

The final part of creating this feeder is to pour the feed into the #2 bottle, screw on its cap and insert this bottle into the first one with the neck cut off. The manufacturing technology is clearly shown in the video

A bottle feeder with spoons is also a great option for those who can't feed regularly and who have a few wooden spoons in the kitchen. You need to make a hole in the lid and thread a rope through it for hanging. After you need to make 2 symmetrical holes corresponding to the size of the spoon. Where there will be a wide part of the spoon, the hole should be wider so that the birds can take food. The spoon is inserted into the holes and the food is poured. You can make a dining room for birds with one spoon, or you can use several so that two birds can eat at once.

Birds are our smaller friends who delight us with their chirping and singing. And any garden in the presence of birds seems to come to life, filled with new life. Besides birds help to protect the summer cottage from attacks of various insects in the summer. And in winter, when they have almost no food, the task of a person is to help the birds survive the frost by feeding them. A good attitude towards birds will pay off handsomely. for birds with their own hands is done quickly, without unnecessary manipulation, it will not only become a source of food for birds, but it will also be able to decorate any area.

Feeders for winged birds were made by many while studying at school, and someone, together with their parents, managed to make far from one feeder while still attending kindergarten. At that time, tasks for making feeders were given at school in order to instill in the child a desire to work and take care of our smaller brothers.

Now, in most cases, feeders in the adjoining areas are located in order to lure birds to permanent residence in the garden or to take care of them in the winter. There are a great many variations of feeders, but do not forget that if a person pursues a good goal, he must make sure that the feeder is not just beautiful, but comfortable and attractive to birds.

So what should it be like so that birds from all over the area flock to peck at delicious delicacies?

1. The feeder should not be bright. Do not forget that birds are inhabitants of the wild, in which bright colors often indicate the danger of an insect or animal. So it is unlikely that birds will fly to nuclear flower feeders. The best option is the color of the wood.
2. The place for feeding should be equipped with small sides so that the food does not fall out of it during the wind and at the moment when the bird lands on the feeder and shakes it.

   

3. It is important to make sure that the sides and other elements of the feeder are not sharp and do not pose a danger to birds.
4. The best thing, so that the feeder has a small roof- then the food lying in it will not get wet in the rain, and it will not be covered with snow.
5. It is recommended to place the feeder where cats and other predators cannot reach it.. Then the birds will happily fly to it. If the place carries danger, then it is unlikely that it will be possible to lure the birds.

   

6. All openings in the walls of the feeder must be spacious so as not to create the effect of an enclosed space. Otherwise, the birds will be uncomfortable.
7. It is best to make a feeding place that will withstand various weather conditions and will not collapse after the first season.
8. Feed in the feeder should be clearly visible- Birds use their eyesight more than their other senses when looking for food.

   

Advice! In order to make the structure heavier and protect it from swinging in the wind, you can place pebbles in it, but so that they do not end up in food.

Which is better: homemade or from the store?

You can make a place for birds to eat on your own, but the stores now sell ready-made designs and products that you can simply purchase and hang in your garden or outside the window. Of course, then a lot of time is saved, but it’s better to make the feeder yourself or order from the masters. Only in this case, you can be sure that the feeder is made of materials that are safe for flying inhabitants of nature and will perform its function correctly.

On a note! Undoubtedly, you need to pay attention to the design of the feeder, but if this is not just a decorative decoration of the garden, then, first of all, you should pay attention to its functionality.

It is also important to understand that a good feeder, but made in production or by craftsmen, will cost a lot of money. So it’s worth considering what to do - save money and do everything yourself, or still spend money and buy a ready-made version.

Provided that a feeding place can actually be made quickly and easily enough, the DIY option remains the best. The main thing is to decide and decide what and how to make a feeder, how and where it will hang, and also take into account the availability of skills in the manufacture of various products. You should not take on a complex project without proper experience, it is easier to choose the simplest option. Fortunately, there are many types of feeders.

Table. Types of feeders.

On a note! The design can be made simply from feed, combining the grains into a single lump with the help of various nutrients and hanging such a “gingerbread” in a conspicuous place. Suitable for small birds that will peck out grain from the feeder, catching on it with their claws.

What can you make a feeder out of?

You can make a feeder yourself from a variety of objects and materials, ranging from an ordinary board to a plastic bottle or even a tetrapack box. Each material has its advantages and disadvantages, and it is necessary to choose what the food base will be made of, based on the presence of certain skills in working with various tools, the availability of free time, funds, and the goals of creating a place for eating.

Wooden feeders

The best option for creating a bird feeding area was and remains a natural, untreated tree. Such a design will be closest to nature, and its neutral color and smell will not scare birds away from food. It is ideal if the natural bark is preserved on the boards. So when choosing a material, you can stop at saw cuts of birch, pine, etc. You can even make a feeder from branches!

Wooden feeder - the best option

But in order to make a wooden, even the simplest feeder, you will need certain skills and tools for working with wood.

Advice! You should not decorate a wooden feeder with various bright objects, but you can decorate it with natural material, for example, by masking the roof with twigs, cones, leaves.

How to make a tree feeder?

Consider how you can make the simplest feeder from wooden materials. To do this, you need to buy wooden blocks, a small piece of fiberboard, a furniture stapler, a saw, drawing supplies and a tape measure.

Step 1. From a sheet of fiberboard you need to cut a square or rectangle. You should apply a drawing of a square or rectangle of the appropriate size on a sheet of fiberboard, and then cut off the excess with a saw.

Step 2 Now you need to make the sides for the pallet. It is necessary to cut out two pieces of the same length from the bar, equal to the side of the square or the long side of the rectangle, as well as two shorter pieces, which will be equal to the width of the square or the narrow side of the rectangle, minus the thickness of the bar.

Step 3 The sides need to be attached to the bottom of the feeder, which was previously made from fiberboard. The easiest way to do this is with a stapler.

Step 4 Now you need to make 4 supports for the roof of the feeder, all from the same bar. They must be the same height.

Step 6 The upper parts of the supports standing on one side must be connected with crossbars cut from the same bar. You should also make saw cuts on them at an angle of 45 degrees.

Step 7 Next is made. It is required to connect two sheets of fiberboard at an angle of 90 degrees. The connection is made using a small "ridge" bar with a length equal to the length of the slope. It is worth remembering that the roof should hang a little over the tray of the feeder, which means that the slopes should be made taking this factor into account.

Step 8 Next, the roof must be fixed on the racks for it using the same stapler or nails. The junction of two slopes can be glued using any material that does not allow water to pass through. The feeder is ready. If desired, it can be stolen with cones and branches.

Advice! While fixing the sides on the bottom of the feeder, they can be additionally smeared with PVA glue to ensure the connection not only due to the stapler staples, but also due to glue.

Feeders with sides are most loved by shelling birds, and for the rest, you can make a feeder without sides. The main thing is that the side is not too high.

Similar designs can be made from plywood, refusing to use fiberboard. In this case, the feeder will be more reliable and durable.

Video - Wood feeder

Simple hanging feeders

These are very simple feeders, they can be easily and simply made in just a few minutes. They are a delicacy placed on a braid or in a case and hung on a tree. Often, according to this principle, pieces of fat for tits are fixed on the trees. You can also make balls from seeds. To hold the grains together, you can use peanut butter or interior fat. And such feeders just need to be fixed on a braid somewhere in a place noticeable to birds. To attract attention, you can try to tie a sprig of mountain ash to such a feeder. You need to form balls on the street so that they immediately freeze in the cold.

Advice! It is best to make pendants in the shape of a ball, and not in some beautiful and exotic shape. It is the ball that is the most convenient option for birds.

Making a fat feeder

Let's see how you can make a simple structure for placing fat, for the manufacture of which you will need twine, wire and a regular hoop - an accessory for embroiderers.

Step 1. In the store you need to buy ordinary plastic hoops. They need to be separated into two halves, but in the area of ​​\u200b\u200bthe castle, the hoop should remain connected.

Step 2 In the area of ​​\u200b\u200bthe castle, you need to wrap the hoop with wire on both sides.

Step 3 On the other hand, where the hoop is separated, you need to make a wire jumper and wrap it with a “tail” from the wire to about the middle.

Step 4 The rest of the wire must be twisted and formed into a hook at an angle of 90 degrees, which is directed inside the hoop. Fat will be planted on it.

Step 6 After that, the hoop and wire must be wrapped with ordinary twine. The feeder is ready. It remains to place it in the right place in the garden and put a delicacy for the birds on the pin.

Making a feeder from a plastic bottle

Of course, you can simply cut a hole in the wall of a plastic bottle and hang it on a tree, filling it with grain. But you can contrive and make the feeder a little more complicated. To do this, you will need pallets for flowers of different diameters and a plastic bottle of about 1.5 liters. A strong rope will also come in handy.

Step 1. In one of the pallets (which is smaller), you need to make a hole of the same diameter as the neck of the bottle. You can cut it both with a knife and with a special crown put on a drill.

Step 2 Next, you need to remove the cap from the plastic bottle and screw the bottle itself into the tray with the neck, and screw the cork onto the neck from below. But for now, the structure can be temporarily disassembled. A small hole should be cut in the side of the bottle so that the food can spill out of it and be available to birds.

Step 3 Cut off the bottom of the bottle with a sharp knife.

Step 4 Now on the pallet - both on the first and on the second - you need to mark and drill holes for the rope. First you need to make holes on the smaller one, and then, applying it to the larger one, mark it and also drill holes.

Step 5 The final assembly is underway. The bottle must be screwed to the bottom tray.

Step 6 It is required to cut six pieces of rope of the same length. The rope is better to take dense and thick enough. You can also use a synthetic version.

Step 7 Now on each rope you need to tie a knot at the same distance from the edge.

Step 8 It is required to thread the ropes into the holes on the small pallet so that the short tails of the ropes are at the bottom.

Step 9 The second pallet will become a makeshift roof for the feeder. Now you need to thread the ropes into the holes of the second pallet.

Step 10 The ropes must be well tensioned. You should get the same design as in the picture.

Step 11 Now it is required from below and above from the remains of the rope to form "tails". On the top side, do not forget to make a loop for hanging.

Step 12 It remains only to fill the feeder with seeds and fix it on tree branches using a hanging loop.

Video - Large plastic bottle feeder

Video - Glass bottle hopper feeder

You can make bird feeders from any material. In haste, a feeding place can be built even from cardboard, but such a feeder will not last long. If you want to decorate the garden with beautiful and durable feeding places for birds, then it is better to spend your time and make a tree feeder.

How pleasant it is to enjoy the sounds of nature and listen to the lively chirping of the feathered family in your suburban area. To attract these little helpers to the site, who destroy all kinds of pests, you should prepare a small “gift” for them - a feeder. Winter is a real test for birds. Under a layer of snow, it is quite difficult for them to find food to maintain their vitality. The feeder will become a salvation for the birds in the winter months, when they are forced to save themselves not only from frost, but also from hunger. There are many options for how to make a feeder with your own hands, allowing you to make original designs from improvised materials.

The range of ready-made feeders is quite wide. But still, it is much more interesting to turn on the imagination and build an original and pretty design from unnecessary improvised materials. In addition, the whole family can be involved in a useful and exciting activity.

Regardless of what design the product will have, and what will act as the material of manufacture, a good bird feeder should have:

• A roof that allows you to protect food from rainfall. Food soaked in snow or rain quickly becomes unusable.
• A wide opening that allows the bird to freely enter the feeder and get out of it.
• Resistant to high humidity and temperature extremes, the material of manufacture, the use of which will allow you to create a feeder that is ready to last more than one season.

Thus, you are not limited only to wooden building materials, in fact, a feeder can be made from anything.

Outdoor bird feeder can be made of wood, juice or dairy products, plastic bottle, any unnecessary box

Making a classic wooden feeder

Wooden bird feeders in the form of miniature houses are made of boards and moisture-resistant plywood. The presented option refers to a variety of bunker feeders, in which food enters the bird's "dining room" in portions, which greatly facilitates the owner's care of birds.

Construction details are cut from boards 20cm wide and plywood 16mm thick

The given drawing of a bird feeder, made in exact proportions, will facilitate the manufacture of the side walls of the structure.

Instead of moisture-resistant plywood, you can use plexiglass, for fixing which grooves 4 mm deep should be cut in the side walls using a milling machine. The optimal size of the side wall made of plexiglass will be 160x260 mm. Screws can also be used to fix the side panels to the end of the walls.

To connect the parts of a bird feeder made of wood, you can use both wooden edging and glue, as well as ordinary self-tapping screws. The corners of the product must be sanded. To equip the perch, a round bar (el. 8) is used, which is attached to the edges of the side in drilled 10 mm holes.

Now you can attach the roof. To do this, the left half of the roof is firmly fixed to the side walls. The right half of the roof and the ridge are separately fastened together. Only after that, with the help of furniture hinges, both halves of the roof are assembled into a single structure. The gap formed in the assembled product between the plexiglass and the bottom of the structure allows you to adjust the feed supply: one filling of the feeder can be enough for 2-3 weeks. Thanks to the transparency of plexiglass, it is easy to observe the amount of food for birds.

A beautiful and functional design is almost ready. As a finishing touch, the product can be covered with a layer of drying oil or painted.

Other original ideas

There are many variations in the manufacture of hanging "canteens" for birds. The most common and easy-to-create option for building a feeder is from a plastic bottle or juice bag.

It is preferable to use containers with a volume of at least 1-2 liters, which will allow not only small sparrows and titmouse, but pigeons and other relatively large birds to visit the feeders and treat themselves to “goodies”

Holes are cut in the upper part of the package for threading a fishing line or lace. The length of the fastener should be 25-40 cm. On both sides of the container, with the help of scissors or a knife, two spacious entrances are made opposite each other, allowing the birds to freely enjoy the meal. It takes no more than 15-20 minutes to make a simple design. The finished product is easily fixed with a cord in a convenient place near the house and filled with your favorite bird treats.

From this article you can learn how to make do-it-yourself bird feeders: an overview of existing types of structures and general recommendations for their creation and placement, the choice of suitable building materials, photos and drawings with a detailed description of the technology. The text contains unusual and original solutions that will allow you to create a comfortable and beautiful area for feeding birds in the garden or near the house.

If you want to ennoble the area near the house, many owners of summer cottages lay paved paths, break flower beds and flower beds, install benches and lanterns. All this creates comfort and coziness for the residents of the house. However, do not forget about the small inhabitants of the garden, for whom, with the advent of winter, it becomes more difficult to get their own food.

Making a bird feeder with your own hands will not only help the birds overcome this difficult period, but also add a certain charm to the garden. Using simple technologies, you can show your own imagination and create an original feeding house.

Advantages of homemade feeders:

• the opportunity to take care of the birds, which are difficult to get their own food;
• decorative decoration of the yard;
• the opportunity to instill in children a love for the world and birds.

Moreover, such a decision can be implemented not only by owners of private and country houses, but also by residents of city apartments.

Is it profitable to buy a ready-made bird feeder: advantages and disadvantages

If you want to install a standard feeder made at a professional level in the yard, you can order the product from specialists. Experienced craftsmen will independently select high-quality materials and produce a structure using special technologies.

Customers are invited to choose a bird feeder with their favorite design from the picture. Such structures can be of any size and shape. Buying a feeder to order, the consumer can be completely sure that it will meet his wishes and fit perfectly into the exterior of the yard.

Buying ready-made products comes with both advantages and disadvantages. The negative aspects of this include the high cost of professionally made feeders. In addition, the buyer deprives himself of the joys of the creative process and waiting for the arrival of birds. Therefore, many people prefer to create houses for feeding birds on their own in their yard or at the window.

Note! The design of the feeder must be reliable, so it is advisable to select practical and durable materials for its construction that will protect the birds from precipitation and wind.

What requirements should a homemade bird feeder meet?

When choosing a specific design for a homemade feeder, you need to take into account not only the type of birds for which the design will be made, but also other nuances. Birds rely mainly on their eyesight, so the spread of food must be visible to them from afar.

The design of the structure must be such that the crops are not covered with snow or blown by the wind. High sides and a roof will help to cope with this problem. It is unacceptable for moisture to get on the feed. Otherwise, the grains will become moldy and spoil. It is desirable that protection against chipmunks and squirrels be present. At the same time, the birds should not experience any difficulties when retrieving food.

Drawings of bird feeders, of which there are many on the net, can be successfully used as a visual aid for creating a beautiful design. First of all, you should pay attention to practical and convenient options. The food should not wake up on the ground, otherwise it will attract small predators such as stoats, weasels, ferrets. Their presence poses a direct threat to birds.

If the structure will be used for temporary top dressing in winter, it is better to hang it. Thus, the feeder will attract less sparrows, which are much easier to find food than other birds. Stationary structures are used for constant feeding. In this case, the presence of protection from predators is mandatory. It is desirable that the grain is on a flat area of ​​a sufficiently large size that maintains good stability.

Types of bird feeders: photos and descriptions of designs

The design of homemade feeders is practically unlimited. The main thing is that the design meets the basic requirements of practicality, reliability and safety.

Classification of bird feeders by type of design:

• suspension;
• area;
• house;
• bunker;
• tray;
• peeler.

Each of these designs has its own characteristics and is designed for certain types of birds.

Original do-it-yourself bird feeders: photo of hanging structures

The suspension structures are very simple. In this case, the food is suspended in a mesh case or on a thread. They are used primarily as feeders for titmouse. Although other species of insectivorous birds, with the exception of woodpeckers, can also use suspensions.

The most common version of top dressing - "antifreeze" - a piece of fat without spices and salt. There are also more nutritious mixtures that are designed for shelling birds. For them, a ball consisting of seeds is suitable. As a fastening component, peanut butter or lard (internal fat) is used.

Note! It is not necessary to cast the feed mass into a beautiful shape or a plastic cup and then freeze it. The ball is more comfortable for the birds. So it is much easier for them to cling and they do not have to spend a lot of energy to keep themselves on weight while eating.

A ball consisting of feed mass is most conveniently formed by hand. This must be done in the cold. Fat will harden very quickly, therefore, having formed a ball, it must be hung immediately.

Related article:

Drawings, interesting and practical solutions for creating fences in the conditions of the street and apartment, taking into account the breed and size of the animal.

Hanging craft bird feeders can be made with the expectation of certain types of birds. Great tits prefer garlands made from dried berries. They especially like rose hips. The use of peanuts in pods is allowed.

Swing feeders will be the best option for blue titmouse. In this case, it is desirable to hang the balls on elastic and thin branches so that they balance.

Beautiful do-it-yourself bird feeders made in the form of mobiles or movable sculptures look original in the photo. Such designs are able to attract even large tits, which will not conflict with blue tit.

Hanging options from cones are suitable for attracting bullfinches, peeling birds and waxwings. To make the feeder visible from afar, you can hang a bright bunch of mountain ash or viburnum on it. It is advisable to use a fertile cone for this. If this is not possible, any with ruffled scales will do. It must be doused with peanut butter. After that, food is placed between the scales and the cone can be hung. Such cones may even appeal to crossbills.

Paper cannot be used to create such structures, however, you can make a beautiful bird feeder with your own hands from a dense base from a toilet paper roll. It is advisable to attach bright pieces of fabric or paper from below that will attract the attention of birds.

Convenient do-it-yourself bird feeders: photos of tray structures and platforms

Feeders-platforms are a flat plane on which food is placed. The advantage of such designs is that birds can see the presence of food from afar. However, a do-it-yourself flat wooden bird feeder also has disadvantages. Firstly, there are no fences that provide protection from the wind. As a result, the food in large quantities swells and wakes up. Secondly, nothing prevents sparrows from actively using these feeders.

The fact is that sparrows keep in flocks. These sneaky birds, unlike pigeons and crows, can freely enter small feeders and empty them, not giving a chance to other birds, which are much more difficult to get food in winter. To eliminate this possibility, it is desirable to avoid the use of open structures.

Sparrows are very careful. In case of danger, they take off straight from the place steeply upwards. Therefore, the best option would be a birdhouse made of cardboard or wood with a steep roof that has more overhangs. It is desirable that the design has low windows that provide birds with access to food. In this case, the sparrows will first have to flutter to the side before flying away, so such feeders are unattractive for them.

Helpful advice! In winter, the birds will not interfere with vitamin supplementation. To do this, you can put pear and apple cores with seeds, viburnum berries, elderberries, mountain ash, the fibrous part of a pumpkin with seeds, dried rose hips, and grape seeds into the feeder. It is allowed to use cherry pits from compote.

For those birds that constantly live on the site, an original do-it-yourself tray-type bird feeder made by yourself is suitable. In front of the tray (a window that provides access to the feed), you can install a perch or a landing pad.

Tray feeders are of two types:

1. With free access to the mixture.
2. With automatic feeding in the tray.

A bird feeder on a window with automatic feeding is much more practical than bunker structures. In this case, the food practically does not wake up. Tray structures are designed specifically for one type of bird. The possibility of using a feeder for several varieties of birds is allowed. However, to create such a structure, not only the appropriate skills and tools will be required, but also ornithological knowledge.

Do-it-yourself feeders-houses: photos of birdhouses and similar structures

Feeding troughs in the form of houses well protect food from snow. Equipping the structure with a roof, you can protect the inside from the wind and sparrows. But a beautiful bird feeder in the form of a house does not provide protection against spillage of food. Therefore, only those birds that are accustomed to feeding will be present on the site. For forest birds, this option is very inconvenient, because they are drawn to human habitation only in cases of crisis and may simply not notice the grains that have woken up on the ground.

A design in the form of a house with a sloping roof can be made from a box. If possible, it is desirable to treat such a cardboard feeder with a diluted adhesive. For this, PVA is suitable, which is mixed with water in a ratio of 1: 3 or 1: 5. Supports are made of sticks, which are also attached with glue. If everything is done correctly, such a feeder will last several seasons. The design is nailed to the tree.

A beautiful pitched roof feeder is the best option for strong large birds. These include Nutcrackers, Waxwings, Jays and Pigeons. All of them can safely sit in a row while feeding, so it is better to equip the dining room with a long perch.

Wood or very dense pre-treated cardboard can be used as a material for manufacturing. The design for large birds should be much larger than for ordinary pichugs. In this case, you need to select drawings of feeders for birds with dimensions that will correspond to them.

Note! A bird feeder from a shoe box is not suitable for feeding large birds. Cardboard in such designs is very thin. Strong birds will break the feeder very quickly during feeding.

Practical do-it-yourself feeders: photos of bunker structures and hullers

Hopper type designs will be the best option if an anti-sparrow feeder is required. In this case, the feeding area is limited in size, so the entire flock will not be able to accommodate. Sparrows will have no choice but to eat in turn with the company of other birds.

Unusual bunker-type bird feeders can have a different design. It is desirable that the product, designed for small spotted woodpeckers and tits, be equipped with a solid narrow platform. Anti-sparrow variants are much wider and have a roof. Modern materials allow you to create a bunker structure in just 5 minutes.

To make a bottle feeder with your own hands, you will need a minimum set of tools and materials:

• kapron thread;
• bottle (PET);
• Super glue;
• plastic plate;
• large needle;
• knife and scissors.

Plastic is a very practical and durable material that is not afraid of moisture and frost. This feeder will last for several seasons.

Peeler feeders are less popular. They are designed for certain types of birds. In this case, the feed is held with a special metal mesh. The design can be improved by making it combined. For this, the feeder-sheller is combined with a tray option. Due to this, birds of different species can coexist in one area.

How to make bird feeders: the choice of materials for work

Having decided on the type of future design, you need to decide what the feeder will be made of. For these purposes, you can use a variety of materials. Everyone has many of them at home, so you can not only create an original bird feeder with your own hands, but also do it at minimal cost.

The following materials are commonly used to make a bird canteen:

• plastic;
• paper and cardboard;
• wood;
• plywood;
• improvised materials (bottles, boxes, milk or juice bags, etc.).

Each of these materials is suitable for creating certain types of structures and has both advantages and disadvantages.

Features of bird feeders from plastic bottles and trays

Plastic feeders are the most popular option. This material has many advantages.

Advantages of feeders from plastic bottles and trays:

1. Material availability.
2. The transparent walls of the structure allow you to make the food visible from afar.
3. Ease of processing.
4. Minimum amount of garbage and waste.
5. There is no need to use special tools.
6. High strength and durability.

Important! The roof of a plastic feeder in the form of a house should be opaque or at least matte. In case of danger, birds may not notice the transparent plane from above and hit it.

A good way to create a small, eye-catching bird feeder out of scrap materials is to use old childhood toys like building blocks. They are made of polyethylene, so it is advisable to use superglue for fixing. Such designs have bright and rich colors, so it will be easy for birds to find food. Polyethylene lends itself well to processing. To cut round holes in the walls, you can use a compass with two needles. Polyethylene is a slippery material, so it is advisable to equip the feeder with a perch.

As a plastic building material, you can use scraps of transparent polycarbonate that could remain after repairs in the house. Such a feeder can be fixed on the window with the help of suction cups from the bathroom shelves.

Bird feeders from bottles and other unusable containers deserve special attention. The main thing is that the design is well thought out. To ensure the visibility of the feed, it is desirable to use a wide tray. The presence of a perch will make feeding birds more convenient. If you take a large tray and a capacious container, you will not have to frequently replenish food supplies. As a result, the birds will be less shy.

To make a do-it-yourself bird feeder from a plastic bottle, it is advisable to use a trough-shaped tray. In this case, spillage of feed will be negligible. If you bend up the cover of the hatch that provides access to the feed, the feeder will turn out to be anti-sparrow. In this case, the plane that forms at the top can be used to place vitamin supplements.

Features of making homemade feeders out of the box

• milk;
• kefir;
• juice, etc.

Despite the fact that these bags are made of cardboard, their walls are covered with a film on both sides. Therefore, laminated feeders are able to withstand one winter.

Small packets left over from juice or milk are ideal as feeders for the following types of birds:

• goldfinches;
• tits;
• granivorous.

In this case, it is imperative to install a perch stick to make it easier for the birds to get food.

Helpful advice! To attract a small motley woodpecker to the titmouse feeder, it is enough to fix a wooden circle on the bottom of the valve. So it will be easier for the bird to gain a foothold on the structure.

From large packages, you can make universal canteens for birds. To do this, you need to cut a large opening so that the food can be seen from afar. If the feeder is suspended, it must be pierced with a perch. A construct from a package can be placed in a bush. In this case, the perch is not required, its function will be performed by branches.

Eco-friendly bird feeders made of wood

The advantage of wooden feeders is their durability. Most often, such structures are stationary.

As a protective treatment, you can use:

• drying oil;
• water-polymer composition;
• mixture in the form of diluted PVA glue.

To build a bird feeder made of wood with your own hands, you will definitely need a carpentry tool and skills in handling it. Traditional models look like a house. It is not recommended to make a flat roof on the feeder, since in this case the feed will be exposed to weathering.

Standard design options in the form of a house, with minor changes, can be improved and specialized for a certain type of bird. For example, a gable roof feeder without railings can be used as a public option. If, however, a small crate is built around the perimeter, such a dining room will be to the taste of the shelling birds. It quite realistically imitates the natural conditions of feeding. A similar model with a continuous low fence will achieve an anti-sparrow effect and protect the food from the wind.

A low pitched roof design will also provide protection from forage bloat. Such a feeder will be used by sparrows only as a last resort.

An alternative option for a suspended structure made of wood is a do-it-yourself plywood bird feeder. To create it, you will also need wooden bars with a section size of 3x3 or 3x4 cm. To avoid the use of lumber, you can make bars from plywood strips by gluing. However, for stationary feeders on poles, it is preferable to use solid wood, since plywood will delaminate in outdoor conditions in a few seasons, regardless of the quality of the protective impregnation.

Helpful advice! If birch waterproof sheets are used to build a plywood bird feeder, you can get a reliable and durable construction. This material perfectly tolerates the conditions of street use.

DIY bird feeders from improvised materials

From improvised materials, you can make unusual and original designs, the creation of which can focus on design or functional features.

A cob of corn can be used as a feeder. To do this, a nail is passed through it. This version of the bird feeder from improvised materials can simply be hung or made part of a stationary structure. Corn should be hard, preferably oilseed or fodder varieties. The smaller the grains, the better.

It is better to refuse the use of table sugar cobs, as they are harmful to birds. Their grains contain a large amount of sugar and starch. The corn feeder is designed for large frugivorous and granivorous birds, as well as hullers.

Ice cream sticks can be used as a building material to create a wooden bird feeder. During the summer season, they can be accumulated in sufficient quantities. To make such a design, you will need a rope and PVA glue. On each side of the feeder, you can install a stick of larger ice cream sticks. Thanks to this, 4 birds can use the dining room at the same time, for example, chickadees or siskins.

An excellent option would be a wicker basket-shaped feeder with a hanging lid. To create it, you will need paper tubes that can be made from old newspapers. The weaving technology is rather complicated and time-consuming, so not everyone decides to take on the construction of such a feeder, but the result exceeds all expectations. To prevent paper straws from deoxidizing, they must be treated with a protective compound (glue and stain).

A large metal tin can is also suitable for building a feeder. It is suspended on a rope in a horizontal position. To prevent the feed from waking up on the ground, it is necessary to install a small damper. For this, the upper part of the lid, bent in half, is suitable. Be sure to install a perch.

Important! Regardless of the type of construction, the feeder must be safe. Wooden models must be carefully sanded and all sharp corners rounded off. Metal options can be wrapped with twine, which sits on glue.

Making bird feeders: drawings, descriptions and technologies

Having decided on the type of construction and material, you can proceed to the direct manufacture of the feeder. It should be noted that not all types of grains are suitable for feeding birds. The favorite food of birds that remain for the winter is wild grass seeds. It is desirable that these were burdock plant species. Turnip seed is suitable, which can be collected in the summer or purchased ready-made at a pet store.

Homemade feeders can be filled with:

• oats and millet;
• small sunflower seeds (not roasted);
• hemp and flax seeds;
• dried pods of acacias living in the middle latitudes (wisteria, honey locust, sophora, etc.);
• pumpkin seeds;
• dry pea pods (it must be ripe and firm);
• pine nuts;
• millet (in small doses);
• seeds of such deciduous trees as ash, hornbeam, linden, maple, alder;
• acorns and seeds of conifers, for example, beech nuts, ruffled cones (if the feeder is designed for stubblers).

Note! Rye, wheat and bread are not allowed. They are harmful to birds. Moreover, black bread is the most dangerous, because it causes inflammation of the goiter. Poorly perceived strongly swelling cereals during cooking, for example, buckwheat, pearl barley, rice. The peel of any tropical fruit and citrus is deadly to birds.

How to make a birdhouse with your own hands: assembling a wooden structure

To build a wooden birdhouse, you will need skills in working with carpentry tools.

To work, you will need the following materials:

• wooden beam for racks (2x4.5 cm);
• plywood square as flooring on the bottom (25x25 cm);
• wooden pieces for the construction of the roof (22x35 cm, 2 pcs.);
• fasteners (adhesive composition, self-tapping screws, nails).

It does not hurt to first find a suitable drawing of the feeder, which will help you navigate during the assembly of parts.

First, the base is assembled: sides and bottom. To do this, the bars, pre-cut in accordance with the size of the bottom, are glued from the end sides and fixed to the screws. The result is a wooden frame. A pair of sides running in parallel must be made about 5 cm longer than the bottom. They will be used to install the perches. With the help of nails, the bottom is nailed to the frame.

At the next stage of making the feeder do-it-yourself racks are mounted from wood. In order to fasten the corresponding parts from the inside of the box. The optimal length is 18-20 cm.

A truss system is attached to the racks. To do this, you need to connect a pair of bars at a right angle. To strengthen the place of fixation, the joint is fixed with a piece of timber. The result is a right angle with equal sides. According to the drawing, it is necessary to make two such parts.

Helpful advice! In order to properly connect the parts of a bird feeder made of wood, when fastening the bars, you need to lay the flat wide part on the table. After that, an additional element is attached from above at an appropriate angle.

Then the rafters are attached to the racks with self-tapping screws. Next, the roof slopes are installed. To do this, two wooden elements are installed on the rafters. If a wooden corner is available, you can make a skate. A bird feeder made of wood needs a perch. To do this, sticks or a window glazing bead are glued between an elongated pair of sides.

This design can be both stationary and suspended. It can be mounted on a pole or, by making a couple of holes in the ridge, hang it on a wire.

How to make a do-it-yourself bird feeder out of wood: plywood construction

An alternative option for a wooden feeder would be a construction made of plywood.

The material allows you to choose any modification:

• open;
• with a gable or flat roof;
• with bunker.

Plywood is a wood-derived material that is much cheaper and lighter in weight. Before you make a bird feeder out of wood, you must definitely select the appropriate drawing. In this case, it is necessary to take into account the type of birds living in the region. Large birds such as magpies, pigeons and jays can eat all the food, leaving small birds without food. Therefore, if the feeder is designed for tits, the openings should be such that large species cannot reach the grains.

To work, you will need the following tools and materials:

• jigsaw;
• sandpaper;

• water-based adhesive;
• nails and hammer;
• plywood sheet;
• timber with a section size of 2x2 cm.

In accordance with the drawing, markings are applied to the plywood sheet. After that, all the details are carefully cut out with a jigsaw. A square element 25x25 cm will be used as a flooring for the bottom. For the construction of the roof, you need to take larger parts, otherwise moisture will drain onto the feed. The edges of the resulting blanks must be sanded.

From the timber you need to cut 4 racks 25-30 cm long each. If the structure will have a shed (flat) roof, a pair of bars should be shortened by 2-3 cm. The cut is made at an angle. All joints of parts are treated with an adhesive composition, after which they are fastened with nails. Racks are installed on the bottom, and sides are fixed to them. A roof is installed at the top of the racks. The design can be installed permanently or suspended using a hook and hardware.

Helpful advice! If the wooden feeder will be varnished, it is recommended to use a water-based compound for this so as not to harm the birds.

How to make a do-it-yourself feeder: a hanging grain structure

Suspended grain structures are the easiest option. Such a design can be made in a few hours.

For work you will need:

• raw bird food;
• oat groats;
• egg;
• gelatin;
• flour;
• needle and thick thread;
• thick cardboard and scissors;
• pencil and molds for filling.

How to make an edible bird feeder with your own hands:

1. Draw on the cardboard the figure you like, for example, a square, a circle, a triangle, a heart, etc.
2. Cut out the shape according to the markup.
3. Form a fastening by threading a needle and making a hole.
4. Prepare the glue mixture. To do this, the following ingredients are mixed: 1 tsp. honey, egg, 2 tbsp. l. oatmeal and a small amount of flour.
5. Leave the mixture for half an hour.
6. Apply adhesive mass over the cardboard base.
7. Mix grain feed with glue mass.
8. Apply the resulting mixture to the cardboard base.

After that, the grain feeder should be placed in the refrigerator for several hours. When the mixture hardens, the products can be hung on tree branches in the yard.

There is another technology for making edible feeders:

1. Dissolve gelatin packet in warm water.
2. Pour food into it.
3. Divide the resulting mass into molds.
4. Insert thread for hanging.
5. Send the molds to the refrigerator for several hours.

After hardening, the feeders are completely ready for use. To make it easier for the birds to grasp, the molds can be placed in bright mesh bags.

How to make a bird feeder from a plastic bottle

In every home there is an unnecessary plastic container. Therefore, many are thinking about creating a bottle feeder. The material is cut with scissors or a knife, and the design is transparent and very light. This option is especially convenient, as there are several ways to create plastic feeders.

How to make a plastic bottle feeder:

1. A pair of holes are cut on both sides of the bottle. They should be symmetrical. The shape can be any: arch, square, circle, rectangle.
2. Jumpers must be left between the holes.
3. You can make a rain visor by making an inverted U-shaped slot and bending the plate up.
4. The lower edge of the slots where the birds will land must be secured. To do this, the cut is covered with fabric insulating tape or adhesive tape.
5. At the bottom you need to make symmetrical holes.
6. A perch stick is inserted into the holes obtained.

Such a feeder can be fixed on a tree. To do this, the jumper is wound with a rope, tape or other material.

Helpful advice! If you insert twine from a bottle through the birdhouse lid, having previously made holes in it, you can form a loop that will allow you to hang the structure on a tree branch.

Do-it-yourself bunker feeder from a plastic bottle

The bunker design is very rational. It allows you to fill up the feed mixture with a margin for several days. As the birds eat the grains, the additive will automatically flow onto the tray.

To work, you need a couple of bottles of the same capacity. One container is marked with a marker. Near the bottom, it is necessary to make holes similar to those made in the previous version of the plastic feeder, and then remove 1/3 of the bottle (top).

A pair of symmetrical holes is made in the upper part. They will be used to hang the feeder with ribbons or twine. The second bottle will store the food. In the narrowest part of this container, several holes should be made through which the grains will spill. Don't make the holes too big. If necessary, it is better to expand them later.

The corresponding bottle must be filled with the feed mixture, screw the stopper in it and place it inside the container, which is cut off by 1/3. After that, twine is pulled through the holes, and the structure is hung on a tree.

How to make a bottle feeder: the simplest design with a spoon

There is another version of the bunker design - a feeder with a spoon. For this, a bottle with a capacity of 1.5-2 liters is suitable. First you need to make a hole in the cork and stretch the twine through it. With it, the structure will be suspended on a branch. Then you need to make holes symmetrically (one on each side of the bottle). They should match the size of a wooden spoon.

On the side where the deep part of the spoon will be placed, the hole needs to be slightly expanded so that it is convenient for the birds to pick up food. It remains only to fill the feeder with the selected feed mixture and hang it in a convenient place.

Helpful advice! To prevent the hopper feeder from accumulating moisture, several holes must be made in the bottom. To do this, you can use a small nail or a hot needle.

How to make a bird feeder from a 5L bottle

Water bottles with a volume of 5 liters can hold much more feed than standard containers. In addition, the large size of the container allows you to make several holes, so that a large number of birds can feed at the feeder at the same time.

For work you will need:

• wire or tape for hanging;
• clean bottle;
• birdseed;
• a cutting tool, such as a pruner, scissors or a clerical knife.

First, a hole is made for hanging the structure. Its location will depend on the nature of the placement of the feeder on the tree:

1. Horizontally - a pair of wide holes is made (one near the neck, the other - from the side of the bottom).
2. Vertically - with an indent of 5-7 cm from the bottom of the bottle, it is necessary to cut 3 rectangular holes or several square ones.

It is most convenient to hang the bottle by the neck. If the structure is fixed in a horizontal position, two holes must be made in the wall and, after passing the twine through them, fix the feeder on the tree. Plastic structures are very light. To prevent the bottle from being swayed by the wind, before filling it with food, it is advisable to put ¼ of a brick on the bottom.

Technology for creating a bunker feeder from a 5 liter bottle

To create a bunker feeder, you will need several bottles (5 l - 1 pc., 1.5 l - 2 pcs.), As well as a clerical knife, a rope and a marker. First, markings are applied to a large container. With the help of a marker near the bottom, a zone is marked where a hole will be placed that acts as a tap hole. It is best to make 2 small slots and one large one through which you can install a 1.5 liter bottle.

Then a U-shaped hole is cut upside down. The upper part should be bent to make a protective visor from the rain. The lower edge of the opening is sealed with adhesive tape so that the birds do not get hurt during feeding.

In those areas where the bottle placed inside is in contact with the bottom of a large container, as well as in areas slightly higher, holes must be made. As the food is eaten, the grains will wake up through them. A round hole is made in the cap of a 5-liter bottle so that after screwing the thread, the neck of the inner container rises. Then, at the second bottle, you need to cut off the neck along with the top. The result should be a funnel. It should be put on the neck of the inner bottle and tighten the cork. The feeder is ready.

Helpful advice! It is advisable to install the feeder under the roof so that the birds are more comfortable. For this, a canopy or gazebo is suitable.

How to make a feeder out of a box: a description of the process

A homemade bird feeder can be made from the simplest materials at hand. Almost every home has boxes of food, shoes or electrical appliances. For work, it is desirable to select thick cardboard. An ideal option would be a bird feeder out of a box with a laminated coating, which will increase the life of the structure.

The advantage of this method is that the box already has walls, a bottom and a roof. Therefore, the steps to convert it into a feeder will be minimal, you only need to cut holes in a rectangular or square shape on the sides.

To make a bird feeder with your own hands out of the box, you will need a clerical knife or scissors, cord and tape. Since cardboard is short-lived and vulnerable to moisture, it should be wrapped with tape for protection. This is done after the feeder is ready. When holes are cut in the side walls for access to the feed, you need to fasten the cord and hang the feeder. To prevent the structure from rocking from the wind, put a few pebbles or pour sand on the bottom.

You can slightly change the technology. In this case, the box lid is glued perpendicularly. As a result, it will serve as a feed stand. The second part of the box will replace the roof and railings. The design must be glued with adhesive tape.

Next, you need to organize a system of fasteners for hanging. To do this, a pair of hooks is made from wire. A piece of wire is bent in half and the end is pierced through the "ceiling" part of the feeder. After that, the wire is twisted and bent from the inside. Now the feeder can be hung on a branch.

How to make a feeder out of a juice or milk box

To create such a design, you will need a Tetra Pak bag from liquid foods, such as juice or milk.

List of necessary materials and tools for work:

• wire for hanging or nylon rope;
• a clean milk or juice bag;
• adhesive plaster;
• stationery knife or scissors;
• marker.

The feeder should be comfortable for the birds, so markings are applied to the cardboard and a couple of holes of sufficient size are cut out on opposite sides. Through space will allow the birds to easily move and take food. For safety reasons, the window must be pasted over with adhesive tape.

Under the slots, you need to pierce a hole with scissors and insert cardboard rolled into a tube into it. This will be a perch. The material for its manufacture can be taken from scraps left over from previous operations. In the corners you need to make small holes where a rope or wire will be stretched for hanging. A milk carton feeder can be tied to a branch or attached to a tree trunk.

Helpful advice! To prevent the structure from swinging, it is better to cut the slots not on opposite sides, but on adjacent walls of the package.

The feeder can be made from two juice packs. The first tetrapak needs to be cut along the narrow side parts so that the top remains intact. 1/3 is cut off from the second package, and a hole should be cut on the front side. This area will be used as a stern board. The bottom of the second tetrapak must be combined with the first package. If everything is done correctly, you should get a triangle. To fix the parts, it is better to use glue, as well as winding with tape.

How to decorate a bird feeder with your own hands: interesting ideas

When the feeder is ready, you can start decorating it. In this case, everything depends solely on the imagination. The design of homemade dining rooms for birds is practically unlimited, the main thing is that all decor elements are environmentally friendly and safe for birds.

How to decorate the feeder with improvised materials:

• paint the structure with a coloring composition;
• decorate with weaving from ropes or twine;
• use materials of natural origin as decor, for example, moss, tree bark and branches, cones, acorns, chestnuts;
• decoration with colored ropes;
• use of chains with an unusual shape of links, etc.

On the net you can find many interesting ideas for decorating homemade feeders. If you approach this issue thoroughly, you can make a house of an unusual shape. After that, the paint left after the repair, various figures and colored paper are used for decoration. However, do not overdo it with rustling and shiny details, otherwise the birds will be scared. In addition, decorative elements should not create obstacles for food intake.

The use of paint will not only change the color of the structure, but also protect the material from the negative effects of atmospheric factors. Coloring can be monophonic or multi-colored. In this case, you can use various drawings. It is better if their theme is intertwined with winter motifs. On sale you can find many interesting stencils that will simplify the process of decorating.

An interesting design will turn out if you arrange a wooden structure in the form of a bee hive or a miniature mill. This work is very meticulous, but if you try, you can achieve a complete resemblance to real buildings. Decoration in the form of small branches will give the design a natural charm. At the entrance, you can hang a beautiful cone or an edible garland, the main thing is that it does not block access to the feed.

For decoration, old dishes can be used, for example, a saucer with a cup or a tea infuser. To do this, 4 holes are drilled in the saucer and a rope is pulled through them. After that, the cup is glued to the saucer. This design can be hung in any corner of the yard. The carving, bright painting, pieces of leather and applications look original in the design of the feeders. By creating several designs in the same style, you can get a beautiful composition that will emphasize the exterior of the yard.

Having spent a little time building a bird feeder with your own hands, you can not only provide the feathered inhabitants of the garden with a delicious snack, but also get a worthy decoration of the yard.

For birds, you need to have a few simple items and tools.

The feeder can be made with the children, but keep in mind that you need to follow every step, as in the construction process, sharp things are used - scissors, knives, screwdrivers and even, sometimes, a saw.

There are many options for feeders - from plywood, a plastic bottle, a can or cardboard.

Here are the most interesting, popular and original ideas for creating a feeder:

Feeder from improvised materials: toilet paper sleeves

You will need:

1 toilet paper roll

Peanut butter

small bowl

plate

A couple of branches

Strong thread or fishing line

Knife (blunt or plastic).

1. Connect two branches or sticks together with hot glue or string. You can skip this step if you make 4 holes in the sleeve (see below).

2. Make holes in the toilet paper roll so that you can put two branches or sticks into them. It is better to make 2 holes: a little higher and 2 a little lower (see image). This item is optional, because the sleeve can be put on in a different way.

3. Place the peanut butter in a small bowl and use a plastic knife to spread the oil onto the surface of the toilet paper roll.

4. Sprinkle food on top of the peanut buttered hub.

5. Repeat steps 3 and 4 for 4 more bushings.

6. Tie a strong thread to the connected branches so that the structure can be hung.

7. Hang all the cardboard sleeves on the branch structure, and then hang everything on the tree.

Plastic bottle feeder. Option 1.

You will need:

Any plastic bottle

Ribbon, thread or fishing line

Awl or drill (for making holes in the bottle and plastic cap)

Bolt and nut

Knife clerical or simple (if necessary)

Deep plastic bowl.

1. Prepare a plastic bottle. Remove the label from it, wash well and dry.

2. Make a hole in the middle of the lid and plastic plate.

3. Attach the lid to the plate with a bolt and nut.

4. Make a hole in the bottom of the bottle (at the bottom).

5. Poke a few holes on the side (4-5) near the neck of the bottle so that the food can spill out when you turn the bottle upside down. Holes can be made with a clerical knife if the bottle is not too tight.

6. Take the ribbon, fold it in half, and tie the ends into a knot. Pass the tape through the hole at the bottom of the bottle.

Now you can pour food into the bottle, screw on the cap and turn it over. The ribbon will allow you to hang the feeder on a branch.

Bird feeder from a plastic bottle. Option 2.

You will need:

Plastic bottle

Plastic container

Strong thread or fishing line

Screwdriver or nail

Knife (simple or clerical).

1. Remove the cap from the bottle and the cap from the container.

2. Put the bottle cap on top of the container (in the center) and draw around with a pen, felt-tip pen or pencil.

3. Use a utility knife to cut a hole in the container lid. The hole can be made slightly smaller than the diameter of the bottle cap.

4. Poke one hole at the edges of the container lid.

5. Make a hole in the center of the bottle cap. The hole should be large enough for the bird feed to pour through.

6. Put the cap on the bottle and then insert the bottle into the opening of the container cap.

7. Tie a strong thread to the bottle and put the cap on the container.

Now you can fill the bottle with food or pour water and hang the feeder on the tree.

How to make a feeder out of a box (photo-instruction)

Original feeder made of polymer clay

You will need:

Polymer clay

Rope

Thick wire or piece of aluminum

Baking bowl or any other utensils that can be put in the oven

A small piece of cloth.

1. First roll out the clay on a flat surface so that its thickness is about 6 mm.

2. Gently place the rolled clay inside the baking bowl. Trim off excess pieces so that the clay lays flat. Make 3 large holes in the clay for the rope.

3. Put the bowl of clay in the oven. Carefully read the instructions for the clay to know how long it takes for the clay to harden in the oven.

4. When the clay hardens, carefully remove it from the bowl, tie three pieces of rope to it - tie a knot at one end of each rope, and insert the other end into the hole in the clay plate.

5. Tie all ends of the rope and secure with wire.

6. It is advisable to lay a small piece of cloth inside the plate so that the birds do not accidentally peck at the clay along with the food.

Original do-it-yourself pumpkin feeder

You will need:

small pumpkin

Wooden crossbars (even branches are possible)

Thin wire.

1. Cut off the top of the pumpkin.

2. Using a knife or screwdriver, make 4 holes in the pumpkin to insert branches or wooden beams into them. Make 2 opposite holes at the same height and two opposite holes a little lower - so you have one branch slightly higher than the other.

3. Take thin wire and wind it around each end of the branches so that the feeder can be hung on a tree. Connect all ends of the wire so that the feeder can hang evenly. Hook them up.

The original idea of ​​​​a bird feeder with your own hands

This feeder is suitable for sub-zero temperatures.

You will need:

Large plastic bottle

Small plastic bottle or small plastic container

Scissors

coniferous branches

Berries (optional)

Seeds

1. Cut off the bottom of a large and small plastic bottle. First you can make a hole with a knife and then cut with scissors. You will get the base of the feeder.

2. In the carved bottom of a large bottle, put spruce branches, berries and seeds in a circle.

3. Place the bottom of a small bottle or a small plastic container in the center of the base.

4. Pour earth, sand or pebbles into a small container.

5. Tie strong threads or fishing line to the feeder so that it can be hung.

6. If you put the feeder in the freezer overnight, and then remove and remove the plastic parts, you get an ice feeder.

How to make a do-it-yourself feeder using a bottle

You will need:

Small glass or plastic bottle (preferably with a lid)

Small saucer or plastic bottle bottom

Wire

Saw (if necessary)

Screw half ring (hook).

1. Using screws, connect two small pieces of plywood. In this example, the dimensions of the plywood are 11 x 15 cm and 31 x 15 cm.

2. Using the bottle that you will later attach to the stand, mark the places where you will need to attach two pieces of wire - one at the neck, the other at the bottom of the bottle.

3. The neck of the bottle should be about 3-4 cm above the base.

4. Drill holes for the wire, put your wire through the bottom, wrap it around the bottle and fasten it to the back of the plywood (you can twist the wire or fix it with a stapler).

5. Fill the bottle with seeds, twist the lid so as not to scatter the seeds, turn over and insert the bottle between the wires, place a saucer under it and remove the lid.

6. Screw a half-ring screw to the top of the plywood to hang the feeder.

Original do-it-yourself bird feeder

You will need:

Tin can (preferably with a lid)

Sisal rope (sisal rope) or thick rope

A piece of thin plywood, a branch, or any small piece of metal

Hot glue.

1. If you have a jar with a lid, then the lid must be bent in half.

2. Take a small branch, piece of plywood, or other small piece that birds can land on and glue it to the jar.

3. Insert the bent lid as shown in the image (slightly inside the jar and over the metal part) and secure it with glue.

4. Take a thick rope or rope about 80 cm long, and start winding the jar so that the long ends of this rope (30 cm) remain at the beginning and end. Use glue to secure the string to the jar.

5. Cut the rope, tie the ends into a knot and secure with glue.

You will need:

3/4 cup bird food

1/4 cup water

1 packet gelatin

Twine or strong thread

Biscuit baking molds

Baking paper.

1. Mix gelatin with water (1/4 cup) and bring to a boil, stirring. Make sure the gelatin is completely dissolved.

2. Remove from heat and let cool.

3. Add 3/4 cup bird food. More can be added if available.

4. Place the cookie cutters on baking paper and fill them with the prepared food mixture.

5. Cut a piece of thread and tie the ends into a knot. Partially insert the thread into the mixture.

6. Leave the mixture to dry overnight, occasionally trying to turn over when there is time.

7. Remove the molds and hang the food on the tree.

How to make a DIY bird feeder using tin cans

You will need:

3 cans of paint or cans

Piece of branch or wooden stick

Hot glue

Paints (if desired).

You can paint the jars, or you can leave it as is.

1. Glue a piece of branch to the jar so the birds can land and eat.

2. Wrap strong string or ribbon around the jar and tie the ends into a knot. You can secure the tape with glue so that it sticks to the jar better.

3. Fill the jars with food and you're done!

How to make a bird feeder from a plastic bottle