25.01.2017 28.01.2018
Hello to all Photoshop lovers!
It is not at all difficult to draw a straight line in Photoshop, it is enough to move the mouse cursor, but, alas, it does not always turn out to be even with this movement. In the lesson we will learn how to draw straight lines.
To make the line in Photoshop smooth, then hold down the key SHIFT and you will draw a straight line in photoshop. This allows you to draw straight horizontal and vertical lines. You can also draw diagonally, for this you need to click once with the left mouse button on the area where the line begins, the second time where it ends (while holding SHIFT). This will draw a straight line at the given coordinates.
There are several ways to draw straight lines in Photoshop by giving them color, thickness, and other styles. Usually the following tools are used: Brush, Pencil, Pen, Line, Rectangular area. Which tool is best suited for the task is up to you. Each method has its pros and cons.
Draw a straight line with the Brush Tool
The easiest way to draw a line with a tool Brush (Brush Tool). Create a document in Photoshop (ctrl + N) with arbitrary size, I have this 800x600 pixels:
Activate the tool Brush (Brush Tool). Tool call hotkey - B.
Top settings panel change tools if necessary size And rigidity brushes:
Let's draw a line:
Some kind of it is not quite even, you will reasonably notice, right?
To draw a perfectly straight line, you need to hold down the key before drawing Shift, draw a line and release the key. Here is the straight line:
Keypress method Shift before starting to draw a line, it helps to draw a strictly horizontal or vertical line at an angle of 90 degrees, but if you need to draw a line, for example, diagonally, then you must first click the mouse button at the beginning of the line, hold down the key Shift, draw a line, then release the mouse button and Shift.
Draw a straight line with the Pencil Tool
Tool Pencil Tool is in the same tool group as the tool Brush, tool call hotkey - B.
Drawing a line with a tool Pencil Tool similar to drawing brush- make a mouse click at the beginning of the line, hold down the key Shift and draw a line.
Draw a line with the Pen Tool
To draw a line with a tool Feather it will take a little more time than in previous cases.
Activate the tool Feather (Pen Tool), tool call hotkey - P.
Remember to make sure the tool Feather is in mode "circuit". You can view it in top panel tool settings:
Create a new layer, click on the icon for creating a layer in layer panels:
Draw a straight line - just put two dots. To draw a horizontal or vertical line, hold down the key again Shift:
To start drawing a new line, hold down the key ctrl and click on the canvas, if this is not done, the lines will be created continuously.
Draw arbitrary curved lines and hold down the key at the end ctrl with a mouse click on the canvas to complete the lines.
The lines are ready, but, unfortunately, they are only visible in Photoshop in the tab contours (Window-Paths (Window-Paths)), if you save the image, for example, in jpg format*, the lines will not be displayed.
In order to make them visible, we return to the tool Brush, V top panel tool settings size, brush hardness and if necessary, select the brush itself. We need a round brush:
Choose a color:
Activate the tool Feather, right-click on the canvas and select the item Stroke Path:
The following window will open, in which you need to select as the source "Brush", and a tick "Imitate pressure" (Simulate Pressure) it is desirable to remove to get straight lines:
Result:
If you leave a check mark Simulate Pressure, the lines will become thinner towards the ends:
Draw a line with the Line tool
One of the most common ways to draw a straight line in Photoshop is with the Line. Located in the left panel:
The great thing is that you can easily adjust the color and thickness of the line:
Clamped SHIFT I draw straight lines. They are created by the shape-from-vector tool. You can easily draw a vertical, horizontal and 45 degree straight line.
.jpg)
Straight line with selection in Photoshop
It happens that you don’t want to bother with the settings of vector shapes and brushes. Therefore, you can simply select the desired area in Photoshop, for example, in the form of a line and fill it with color.
There is a Rectangular Selection tool in Photoshop:
For example, we need a long and thick line in Photoshop. Select the desired area:
Choosing a tool fill and set the color for the future line.
.jpg)
Fill the selected area with color and remove the selection CTRL+D. We have a straight line.
Like these ones simple ways draw a line in photoshop. We hope you found this information useful! Successes in creativity and good mood!
With a tool pen tool
With a tool pen tool(Pen) so that you can achieve desired effect for a short period of time.
harder
Recorded a small demo video
Interestingly, video goes one and a half minutes and weighs 2 kb BB FlashBack Pro
Feather
- Without releasing the mouse button when creating new point lines can be smoothed.
- It is better to put points in places where the line should have a bend.
- Holding down a key ctrl you can move the control points of the lines using the keyboard.
- Holding down a key alt you can adjust the degree of rounding of the line near the point and its distortion
I was inspired to test Photoshop for its suitability in terms of line drawing. draw lines in photoshop harder than in its vector counterparts and some raster editors - this is the impression I got after getting acquainted with the tools in Paint Tool Sai, Illustrator, Inkscape and others, which have more convenient and flexible tools for creating beautiful linear shapes.
https://website/wp-content/uploads/2011/08/lines.swf,600,490
Recorded a small demo video about how to draw lines in Photoshop and achieve the correct shape as a result.
Interestingly, video goes one and a half minutes and weighs 2 kb– this is very amazing Video recorded on BB FlashBack Pro
However, not everything is so bad. Having studied the specifics of working with the tool Feather, some tricks have been discovered that make it easier to draw lines and make design work more free.
Pen Techniques for Creating Lines
Many people know the first two rules, but 3 and 4 became a discovery for me.
Having created a shape, you can correct the shape and position of the bends of the line and achieve the desired shape.
You can change both the point itself and the position of the guide “whiskers”, which define the shape of the corner near the point.
Working with the finished line
All the lines you create are in the box Path(Ways). It is desirable for each line to create a separate “layer of lines” in the Path panel.
Crtl+h- Hide/Show lines.
Stroke Path… - line stroke function. You can select the tool that will be stroked. Usually this is a brush, and before using this function, it is advisable to set the brush to the desired thickness, and only after resorting to a stroke.
How to draw a straight line in Photoshop?
- Select the brush tool.
- We set it up in such a way that any dynamics of shape and size would be turned off.
- hold down the shift and draw up / down or left / right, depending on where you want to draw a line. If you draw in a new layer, then you can then rotate it to the desired angle with the transformation tool - ctrl + T
How to draw a line in Photoshop
If you take the Rectangular Marquee Tool, you can easily make a thin horizontal selection in the form of a line, which can be filled with some color (Edit -> Fill...).
There are quite a few in BW. different issues by Photoshop. For example:
- How to whiten teeth in Photoshop?
It is not difficult to draw a straight line in Photoshop.
You can simply hold down the Shift key while picking up a pencil or brush. Then the line will be flat with a fixed point.
Or with a rectangular area if you want a thicker line.
You put a point with a pencil without pressing Shift, then you press Shift and put the second point. A straight line will appear between these two points.
I recently needed to do this, I didn’t find the function, but I guessed to hold down the Shift key and just draw with a pencil (or brush). A straight line is drawn, but only either strictly horizontally or vertically (no oblique). Although, in principle, if you need to obliquely, you can rotate the line.
PS. I'm still in Photoshop at an amateur level, so maybe there are some special tools for drawing a straight line that I'm not aware of.
To draw a line, you need to select a tool in Photoshop from the very top called Rectangular Marquee and draw a line of the desired thickness and length with it. Next, it needs to be painted over with tools like Gradient, Pencil or Fill...
Hot key U on top of the toolbar will be a line.
Choose a brush, color, put a point where you want to start the line, then press Shift and without releasing put a point where you want to end the line.
2 days before entering the program, refrain from drinking alcohol and intoxicants
In order to draw a straight line in Photoshop, we just need to use the pencil in this program to press the left click and without releasing press the button Shift (Shift). After that, we direct the mouse in the direction we need and we get a straight line.
There is nothing difficult here)
I wish you good luck in drawing in Photoshop.
As I remember, you can draw a straight line in Photoshop if you press and hold the Shift key and at the same time select a brush or pencil then draw your straight line, but you can not draw either vertically or horizontally ..
For example, when I need to draw a straight line in Photoshop, I just take a pencil or a brush in the program, then put a point in the required place and, without releasing, press the shift key and lead my line in the required direction.
Draw a straight line at Adobe program Photoshop is not difficult at all. First you need to choose a brush or pencil (if you need a thin line, then better pencil, if thick with a feathered border, then select the appropriate brush), set the desired thickness and color. And then, holding down the Shift key, draw a line. It will be perfectly flat.
Lines, as well as others geometric elements, are an integral part of the work of the Photoshop wizard. Lines are used to create grids, contours, segments various shapes, skeletons of complex objects are built.
Today's article will be completely devoted to how you can create lines in Photoshop.
As we know from the course of school geometry, lines are straight, broken and curved.
Straight
To create a straight line in Photoshop, there are several options using various tools. All the main construction methods are given in one of the existing lessons.
Therefore, we will not linger in this section, but immediately move on to the next one.
broken line
A broken line consists of several straight segments, and can be closed, making up a polygon. Based on this, there are a couple of ways to build it.
- Open polyline
As we said earlier, such a line is a polygon. There are two ways to construct polygons - using the appropriate tool from the group "Figure", or by creating a selection freeform followed by a stroke.
- Figure.
When applying this method, we get a geometric figure with equal angles and sides.
To get the line (contour) directly, you need to adjust the stroke, called "Stroke". In our case, this will be a solid stroke given size and colors.
After turning off the fill
we get the desired result.
Such a figure can be deformed and rotated using the same "Free Transform".
- Rectilinear lasso.
With this tool, you can build polygons of any configuration. After setting several points, a selected area is created.
This selection must be circled, for which there is a corresponding function that is called by pressing PKM across the canvas.
In the settings, you can choose the color, size and position of the stroke.
Curve
Curves have the same parameters as polylines, that is, they can be closed or open. There are several ways to draw a curved line: tools "Feather" And "Lasso", using shapes or selections.
- Open
- Closed
This line can only be drawn "Feather"(with a stroke outline), or "freehand". In the first case, the lesson, the link to which is above, will help us, and in the second, only a firm hand.
- Lasso.
This tool allows you to draw closed curves of any shape (segments). Lasso creates a selection, which, in order to obtain a line, must be outlined in a known way.
- oval area.
In this case, the result of our actions will be a circle of a regular or elliptical shape.
To deform it, it is enough to call "Free Transform" (CTRL+T) and, after pressing PKM, select the appropriate additional function.
On the grid that appears, we will see markers, by pulling which you can achieve the desired result.
It is worth noting that in this case the effect extends to the line thickness as well.
- Figure.
Let's use the tool "Ellipse" and, applying the settings described above (as for a polygon), create a circle.
After deformation, we get the following result:
As you can see, the line thickness remains unchanged.
This concludes the lesson on creating lines in Photoshop. We have learned how to create straight, broken and curved lines different ways using various software tools.
Do not neglect these skills, as they help to build geometric figures, contours, various grids and wireframes in Photoshop.
In this tutorial, I will provide 3 simple examples, how to draw curved line in photoshop. Let's get started.
Method number 1. Circle.
First, draw a regular circle, using the tool oval region. With this tool it is easy to draw a circle in this way: with the tool selected, change the tool style from "Ordinary" on "Specified Size" and just set the same size for the height and width of the circle. Or you can do all the operations not with a circle, but with an ellipse. Then just click on the sheet with the mouse, and you will have a selection of the specified size. After that, right-click on the selected area and select the item from the menu Stroke. In the window that appears, select the color and size of the brush. Next, just press on the keyboard "Ctrl" + "D" and your selection will disappear.
Now create another layer on top of the circle. And in a new layer, draw a circle, but without a stroke.
Now just fill inside the selected area with the same color as the background and press the keys "Ctrl" + "D" to remove selection.
Method number 2. Rectangle.
First, draw a rectangular area, stroke, but do not remove the selection yet (how to do this is described in method No. 1).
Then go to the menu "Filter" (Filter) - "Plastic" (liquify). Or press the keyboard shortcut "Shift" + "Ctrl" + "X".
And bend your shape, then press OK. After that, it remains only to remove the selection and remove unnecessary details with an eraser.
Method number 3. Feather.
Perhaps the easiest way is the tool "Feather". Many do not understand what this tool is for just because they do not know how to use it. Everything is simple here. Choosing a tool "Feather", first style it "Contour" (Paths). Then on the sheet, simply put a point with this tool. Release the mouse button and place a second point on the other side, but this time, without releasing the mouse button, drag and you will see how you have the outline of a curved line.
After that, it remains only to stroke the contour, as in the first method with a circle, and also right-click on the contour, select "Delete Outline".
In this way it is very convenient to draw wavy lines.
wavy lines it is more convenient to draw with a pen with an anchor. To do this, you need to put two points on the page with a pen, which will automatically be connected by a line. And then, pulling the middle of this line, bend the line with the same pen.
