St. George's ribbon pencil drawing in stages. St. George's ribbon from satin ribbons, step by step with a photo

0 393564

Photo gallery: What is St. George Ribbon? How to draw it and tie a bow beautifully

George Ribbon png

Everyone is familiar with the St. George ribbon - a symbol great victory. However, for most people, knowledge about this symbol of May 9 is very limited. The semantic load, the history of creation, all this remains a mystery for some. So what is this symbol, what do the colors of the St. George ribbon mean and how did it appear? All this will be discussed in our article. We will also small workshops for schoolchildren: how to draw a victory accessory and how to tie it beautifully in the form of a bow.

The history of the emergence of the St. George's ribbon

The history of creation and what the St. George ribbon symbolizes

This symbol of victory originates from the distant times of the reign of Catherine II. It was the Empress who laid the foundation for the existence of the Order of St. George the Victorious. This order in its composition had a two-color ribbon very similar to the current one, which was called St. George's. In those days, she had 3 black stripes and two yellow ones.

However, in Soviet times this award was abolished, and the "Guards Ribbon" came to replace the St. George's Ribbon with some additions. With its help, the Order of Glory and the medal "For the Victory over Germany" were issued.

What do the colors mean

This ribbon, like the modern one, has two colors - black and orange. Such a color scheme carries a certain semantic load. There are still disputes in society about the designation of the colors used in the ribbon, the explanation for the chosen colors is sometimes found in the depths of history. Russian state. Officially it is believed that black symbolizes smoke, and orange - fire. All together they personify the valor and glory of the military. After the end of World War II, many other meritorious service awards were adorned with ribbon.

Why is the tape "St. George" and not "Guards"

Due to the fact that the modern symbol is more like a guards ribbon, it would be more correct to call it the guards. However, after the launch of the St. George Ribbon campaign in 2005 on the 60th anniversary of the Victory, the military accessory was named the campaign. Its goal was to create and maintain a festive atmosphere, develop a sense of pride and awareness of the importance of the feat of Soviet soldiers. The symbols distributed free of charge in honor of the Victory Day on May 9 have become a symbol of memory and pride. But not everyone is positive about such an action. Some remedies mass media and organizations believe that attaching a ribbon to clothes, and even more so to cars, is a manifestation of disrespect for the merits of fathers and grandfathers.

How to draw a St. George ribbon: a master class with step by step photos

On Victory Day, the symbol can be found not only as a strip of fabric on clothes, but also in the form of a pattern. This symbolism is very simple to draw, it consists of only two colors. Below is step by step master class according to the drawing of the St. George ribbon.

Step by step drawing instructions

How to tie a bow from St. George's ribbon, master classes with photos and videos

The handed out military accessory is often tied to handbags, car radio antennas, or hand-tied. However, the most correct thing is to simply attach this symbolism of the Victory on May 9 to the chest on the left side. Such a method will not desecrate the memory of the fallen.

The simplest method of tying a bow from a St. George's ribbon is to simply fold it in a loop. In the case of a short cut, zigzag folding is most suitable. The resulting bow can only be pinned to the clothes, for example, on the lapel with a pin or needle at the intersection point.

For the basis next way tying, you can take the previous method: fold the tape as in easy way, then slide one end to the intersection, while obtaining two symmetrical loops. The central part should be fixed with a pin or needle. St. George's ribbon in the shape of a bow for beauty is tied at the intersection point with threads of a suitable color.

is an international celebration. To remember and be proud of the exploits of our ancestors is the duty of every generation. That is why, on the eve of May 9, schools and kindergartens are holding thematic classes, veterans come to visit the kids, so that in detail about those difficult times that they had to endure. Children, in turn, are in a hurry to please the heroes with their handicrafts and postcards made by themselves.

Traditionally, postcards dedicated to Victory Day depict symbols military glory: this is the well-known St. George ribbon, orders and medals, carnations, military equipment. Actually, these components of the holiday, today we will learn to draw.

Master class: How to draw a drawing by May 9 for children in stages with a pencil

Example 1

St. George's Ribbon is one of the most recognizable characters victory, how it looks like every preschooler knows. And since not a single themed postcard can do without a traditional ribbon, let's start our master class, dedicated to drawings on May 9 for children, it was from her, telling how to depict her in stages.

So, in fact, we figured out how to gradually draw with a pencil one of the easiest drawings by May 9 for children.

Example 2

Now let's remember what else we associate this wonderful holiday with? Of course, with flowers, or rather with carnations. Drawing carnations is not at all difficult, you will soon see for yourself if you follow our step-by-step instructions:

You can go the other way and draw several flowers on one stem.

Example 3

After we learned how to draw in pencil step by step simple drawings on May 9 for children, you can go to complex compositions dedicated to Victory Day.

Articles on this topic:

An integral attribute of May 9 are carnations, parade flags and, of course, the St. George ribbon. It is distributed completely free of charge by members of the automotive community or volunteers, and the orange-yellow symbol of victory is also sold in stalls, markets and local supermarkets. According to many polls, most residents of the Russian state do not know where the St. George Ribbon came from and what it means. The history of this symbol goes far into the roots of the formation of the state and the Russian Army, and we will talk about this today in our article.

The St. George ribbon appeared long before such an event as the Great Patriotic War (WWII) of 1941, with which we associate the Great Victory Day - May 9, on which it is customary to wear a ribbon.

The orange-yellow symbol is pinned over clothing, worn as a patch, or used as a decoration on Vehicle ah in a series of May holidays. It is at this time that Victory Day falls. People who wear such a ribbon keep the memory of the dead and surviving soldiers. Patriotic War. In fact, the St. George Ribbon was a valuable award for participation in hostilities, which were before 1941. Therefore, it is worth considering the earlier merits of the soldiers.

Over time, the St. George ribbon has undergone a change. Now she has become like a brooch, and earlier she dressed as a separate award over her shoulder. The length of the ribbon has become shorter and the width is much narrower, but the color is still yellow and black. This color refers to the Russian coat of arms, which depicts a black eagle on a gold background. More detailed history occurrence will be discussed below.

History of the St. George Ribbon

George the Victorious or Saint George became the progenitor of the St. George ribbon. In honor of him, a silk ribbon with two-color stripes was named, which began to be awarded to combatants from the time of Catherine II.

The official decree was issued on November 26, 1769. An entry was made in the state statute that from this date (11/26/1769) an award was established - the Order of St. George. He relied on the officers of the Russian Army for valor and courage in battles for the homeland.

The order had 4 degrees and was issued depending on the degree of feat. At the same time, it was customary to wear orders of all degrees on silk ribbons, called the St. George ribbon. From here came the name of the ribbon, which relied exclusively on the award order.

What do the colors of the St. George ribbon mean?

St. George ribbon can be made of various materials, but the colors on it always remain the same. The Victory symbol is colored in yellow and black stripes. Yellow and black colors were taken as the basis of the St. George ribbon for a reason. In 1833, in his writings, Count Litta wrote that the colors of the order imply the color of gunpowder (black) and the flame of fire (yellow).

1833 Chief Chamberlain Count Litta: "The immortal legislator, who established this order, believed that its ribbon connects the color of gunpowder and the color of fire."

However, according to historians, black and yellow mean the colors of the emblem, which was approved in the state. Moreover, if you look closely at the paintings of those times, you will notice that the yellow color is sometimes replaced by orange. And one more opinion of experts, which has confirmation: yellow and black were available on the Askani family estate, from which Catherine II came.

Beautiful St. George ribbons, photo 3 options

How to make a St. George's ribbon with your own hands, step by step instructions

Get ready for May 9, make the St. George ribbon yourself. This is quite simple to do, buy a few colored ribbons for the decorations of the Victory symbol, get the very ribbon in the distribution points of your city or buy it in a store and set aside 30 minutes of your time to make it. Below we consider several options for how to make the St. George's ribbon yourself.

St. George's ribbon from satin ribbons, step by step with a photo

For the manufacture of St. George's ribbon you need:

• a strip of St. George's ribbon 20-25 cm;
• satin ribbon white color(width 2 cm) - 12 cm;
• satin ribbon blue color(width 2 cm) - 12 cm;
• red satin ribbon (width 2 cm) - 12 cm;
• glue gun;
• glue sticks;
• matches;
• tweezers;
• scissors.

In the example with a photo, we will tell you how to make a St. George ribbon with your own hands. In the meantime, heat up your glue gun and set the two-tone tape aside.

Cut the red, blue and white ribbons into 2 cm squares. You should get 6 pieces of each color from the available length. We need to make decorations for the St. George ribbon on each side of the brooch. To do this, we need to build kanzashi petals. Each decoration requires 3 colored squares of different colors.

Take 1 square of the atlas. Bend it in half and hold with tweezers.

Now you need to bend the triangle in half. Hold the tweezers at the base. A petal begins to appear.

Fold it in half again. Scorch the protruding edges of the fabric with a match.

Make sure that the fabric does not stick together and does not burn to black.

One petal is ready. Make the rest of the petals in the same way.

From the received parts it is necessary to form a tricolor flag. Connect the white pieces in one line.

Glue the blue petals over the white side with a glue gun. Insert the first blue piece between the first and second white petal.

Form them like a brooch.

Do the same with the red petals.

After the red petals are glued, the first branch of the tricolor is ready. Do the same with the petals for the second branch. Now take the St. George ribbon and form a buttonhole out of it, as shown in the photo. Seal the edges with glue. On the sides of the ribbon, attach branches of the tricolor and also fix them with a gun. Now the last step remains. To keep the St. George ribbon on clothes, fasten a pin on it.

St. George's ribbon on a transparent background, step by step with a photo

St. George's ribbon with the approach of May Victory Day becomes an ubiquitous symbol. It is used not only in the festive attire of adults and children, but also used to decorate websites, blogs, personal photos.

Ribbon clipart, it is customary to place a few days before the Victory Day and after. Accordingly, advanced users prepare in advance and download St. George symbols. We invite you to take advantage of our selection.

St. George's Ribbon transparent background- another selection of clipart.

St. George ribbon made of beads, photo 3 options

Scheme St. George ribbon with beads

St. George's ribbon is a fairly simple exhibit for beading. Even a novice master can start it. Stock up on orange (yellow) and black beads, fishing line. If you want the tape to be more flexible, then use nylon thread instead of fishing line.

From the resulting scheme, such a pretty St. George's ribbon is obtained.

How to make 9 from the St. George's ribbon, in detail with a photo

Symbol of Victory - St. George's Ribbon is usually tied to accessories or attached to clothing. At the same time, it can be folded in different ways. Someone likes to wear the ribbon like a bow, someone like a loop, and someone even folds it in the shape of the number 9. The finished number can be decorated at your discretion. Take a blank - St. George's ribbon and measure 15-20 cm from it. This length will be enough to make a brooch.

Lay out the resulting length in the form of a loop.

You will get 2 tails of the tape, carefully cut the right one with scissors. If the ribbon is silk, singe it so that it does not “creep”. Fix it with threads, a stapler or glue. Now the resulting figure can be decorated as you wish.

St. George ribbon kanzashi, master class

We offer another plot of the master class with a visual demonstration of the steps for making the St. George ribbon. The video tells in detail what materials to use, the phased composition and, finally, a few secrets from the master.

Do-it-yourself brooch from St. George's ribbon, detailed with photo

The ribbon-brooch appeared on the sale of local craftsmen and market stalls relatively recently, but during this time it has gained high popularity. Not to spend money on original decoration, we will tell you how to make a brooch from the St. George's ribbon with your own hands.

To make a brooch you will need:

• St. George ribbon - 30 cm;
• Satin ribbon orange color width 5 cm - length 35;
• Black satin ribbon width 5 cm - length 35 cm;
• Narrow satin white ribbon 20 cm;
• Glue gun;
• Cartridges;
• Decorations;
• Scissors;
• Lighter.

Cut the orange and black ribbon into squares. You should get 7 pieces.

Take 1 square of each color, fold them in half, as in the top photo. Now put them on top of each other.

Fold the corners of the triangle towards each other. You will get a triangle folded in half.

Cut off the edge of the triangle and singe, as in the photo.

Make the remaining 6 petals in this way, in total you should get 7 pieces. You can alternate colored sides, orange on the inside or outside.

Form three petals into a shamrock. Glue them together with glue.

Glue the decoration from the petals, fasten beads or stars on top of it. Form a loop from the St. George's ribbon, and cut its ends like a check mark. Then fasten the tape to the glue and decorate with a sprig of kanzashi petals. On the side, complete the brooch with a white bow.

Flower from St. George's Ribbon, detail

A flower from the St. George's ribbon is no less spectacular decoration than loops, bows and numbers. You can also make a brooch out of it and secure it with a pin.
We will form the St. George flower from a two-color ribbon. It is better if it is a satin ribbon, it is more flexible. We will need:

1. St. George ribbon - 1 m;
2. Decorations for a flower (you can choose according to your taste);
3. Lighter;
4. Scissors;
5. Tweezers;
6. Glue gun;
7. glue cartridges;
8. Ruler.

We cut the tape into strips of 7 cm.

We fold, as in the photo, and hold on tweezers.

We turn again.

We turn the formed part in half.

Turn the bottom edge up, singe the protruding threads of silk.

It turns out a flower petal.

It is necessary to make 5 St. George petals.

Now you need to cut off a long strip of 20 cm. Cut the ends with a tick.

We roll the tape separately, as in the photo below. We fasten the front and back sides together with glue.

Attach a pin on the reverse side.

Now we connect all the parts of the color to the brooches with glue, we fasten the decorations on top. The flower is ready!

St. George's ribbon with carnations, DIY craft

The best materials for making carnations are foamiran paper. This material resembles rubber, suede and paper at the same time. At the same time, it is easy to form flowers from it. Segments of foamiran of different colors are sold in needlework stores.

Prepare the following items:

1. Foamiran (green, pink) - 1 sheet each;
2. Scissors straight;
3. Scissors with an uneven edge;
4. Glue moment;
5. Iron;
6. Gun with glue cartridges;
7. Foil balls (1.5 cm);
8. Wire rod for a flower;
9. Paper;
10. Pen-pencil;
11. Pin.

Prepare a template for foamiran.

Prepare the details for the flower. Then measure the ribbon from which we will form the loop for the brooch. Trim the edges into a checkmark shape.

Roll the ribbon into a loop.

Circle the foamiran according to the patterns, as in the photo. Cut out details Pink colour scissors with jagged edges, cut green blanks with straight scissors.

Cut the pink foamiran blank as follows:

Turn on the iron. We need to bend the edges of the carnation. Attach foamiran mugs to the iron, holding the edge.

Do this with every pink detail.

Bend the edges on all the details. You should get blanks with tucked edges, as in the photo.

Now, on the wire (flower stem), prick mugs of pink foamiran.

Put a drop of glue on the bottom center. Form a bud.

Continue attaching carnation petals to the wire.

It should turn out like this carnation.

Prepare the base of the flower.

Apply a drop of glue under the extreme petal.

Glue on the neck of the flower.

Now it remains to glue the leaves.

The flower is ready.

Glue the carnation to the ribbon. Apply glue at the flower head and at the stem. Press down and hold for 3 seconds.

On the reverse side fasten the pin.

Our brooch with a carnation is ready.

Video St. George ribbon master class

St. George ribbon from foamiran, photo 2 options

Star from St. George's Ribbon, video detail

Car pendant from St. George's ribbon, photo 2 options

• Craft "Memorial panel".

How to tie a St. George ribbon

It is customary to wear a commemorative ribbon in plain sight, so it is important to know how to tie it correctly.

• St. George's ribbon can be tied to a bow. It is absolutely easy, remember the lessons of a first grader;

• The St. George ribbon is pinned on May 9, so it is often folded in the form of a number;

How to wear the George Ribbon

If you follow the rules, then it was customary to wear the St. George ribbon on the chest, neck or over the shoulder. There was no question of any strings on hair, boots, door handles. This commemorative symbol was originally considered an award ribbon for great services to the fatherland, and now, through the burden of centuries, it has been somewhat modified. It is worn in different ways, exactly as they come up with it different shape. Here are the main ways to wear the St. George ribbon:

• On the chest in the form of a ribbon;



• On the chest in the form of a brooch;



How to fold the St. George ribbon, diagram

• Scheme 1;



• Scheme 2;



• Scheme 3.

DIY greeting cards and posters are one of the most common crafts that are being prepared for Victory Day. Their main theme, of course, is warm wishes and beautiful congratulations to veterans and eyewitnesses of those terrible events. The decorations of such postcards and posters, as a rule, are the constant symbols of May 9 - George Ribbon, carnations, red five-pointed star. There can be many variations for crafts, but most often they choose simple drawings that combine several characters at the same time. For example, a bright red star tied with a St. George ribbon will decorate any postcard. From our today's article, you will just learn how to draw a St. George ribbon and a five-pointed star using a regular pencil.

How to draw a St. George ribbon with a pencil for May 9 - a master class with a photo

At first glance, it may seem that it is quite difficult to draw a St. George ribbon with a pencil by hand. But in fact, if you follow each step exactly, then even a person who does not have developed artistic skills can complete this drawing. A bright St. George ribbon can become a decoration for greeting card, and the basis for the festive drawing, dedicated to the Day Victory.

Necessary materials:

• paper
• simple pencil
• black and orange pencils
• eraser
• ruler

Step-by-step instructions for drawing a St. George ribbon:

1. Using a ruler and a simple pencil, draw two parallel lines. The distance between the lines should be about 5-7 cm. Then we cross both lines with two of the same parallel diagonal lines. We will clean the intersections with an eraser. photo 1
2. Draw a semi-oval on top. We will also connect parallel lines with short lines. photo 2
3. With a black pencil, draw inside the base of the line and every two fill them with black to get characteristic stripes. photo 3
4. The remaining gaps between the black stripes are filled with an orange pencil. Our St. George ribbon is ready! photo 4

How to draw a St. George ribbon with a pencil step by step, video

A step-by-step drawing of a St. George ribbon by hand can also be viewed in a simple video tutorial below.

How to draw a five-pointed star step by step using a ruler and a compass - instructions with photos

The red five-pointed star is another unchanging symbol of Victory Day. Most often, her image is used as decoration for congratulatory posters. To draw the correct five-pointed star, you must definitely use a ruler and a compass. Find out exactly how to do this from our master class, in which we suggest you master drawing a three-dimensional five-pointed star with a pencil.

Necessary materials:

• paper
• simple pencil
• red and black pencils
• eraser
• ruler
• compass

Step-by-step instructions for drawing a five-pointed star:

1. To begin with, using a simple pencil and a compass, draw a large circle in the middle of the sheet.
   
2. Then we take a ruler and draw two straight lines through the center of the circle, dividing it into four equal sectors.
   
3. Now we divide each sector in half with straight lines and get eight identical sectors.
   
   
4. At the next stage, we divide the two central lower sectors and the two upper lateral sectors with straight lines.
   
5. Now we make marks, as shown in the photo below.
   
   
6. From the upper center line we draw two straight lines to the lower marks.
   
7. We also connect the two lower marks on the side sectors with a straight line.
   
8. With a black pencil we connect the lines to each other, forming the basis of our star.
   
9. Draw a line inside the star with a black outline.
   
   
10. Now the finished workpiece needs to be decorated in red. The side faces of the star are slightly tinted with a simple pencil to get a three-dimensional five-pointed star.
    

How to draw a star with a compass by May 9, master class with video

And from this video tutorial you will learn how else you can draw a five-pointed star using a compass.

We hope that our simple instructions helped you figure out how to draw a St. George ribbon and a star on May 9 with your own hands. We are sure that by applying this knowledge in practice, you will be able to decorate wonderful crafts for Victory Day.

Well, now let's start creating our St. George ribbon. Let's open graphics editor Adobe Photoshop, create a blank canvas with the dimensions we need. If you need markup, then we set the guides. After that, with the pen tool, we will begin to create the shape of our ribbon. First, draw one side of the ribbon.

After the shape of one side of the ribbon is created, we will create the second one, but we will not draw it, we will simply copy the one that we have already created and expand it horizontally. To do this, select the layer with the shape of the first side and drag it to the icon at the bottom of the layers palette create a new layer or go Go to Layer > Duplicate Layer. Then make the duplicated layer active, flip it horizontally. Do the horizontal reflection as follows, go to the menu Edit > Transform > Flip Horizontally. We get the following result as in the screenshot below.

Well, in conclusion of creating our form of the St. George ribbon, we will create a connection between the two sides. We also use the pen tool.

Let's move on to creating the main color of the ribbon, we will have an orange gradient for it. Which we will apply using a layer style to all three ribbon elements. We make a double click on the layer with the tape, which will be on top, thereby we will call layer style, where we assign gradient overlay.

Using the same principle, we will overlay the gradient with the rest of the ribbon elements, changing only the shade of the gradient.

The form of the St. George Lena with the main color is ready, now we will apply black stripes. Using the same pen tool, create a line outline on top of our shape layer. Then right-click on the outline and choose fill the outline, the color should be black.

Then duplicate it twice, adjust the location. And let's merge these three standing with a black stripe into one. Next, select the layer with the shape of the tape, on which the stripes were drawn by pressing the key Ctrl + mouse click on the ribbon shape layer icon. Let's go back to the layer with black stripes, invert the selected area by pressing the keys Shift +Ctrl+I. Then we press Delete as a result, we will remove the extra pieces of black stripes that went beyond the shape of the tape.

Next, using the same method, we will create a black stripe on other parts of our tape. Let's place the stripes on top of our shape layers. We will also set the forms in the right order. Screenshot of the order and what should come out below.

Well, now the tape is ready, it remains to give it volume due to light and shadow. We will need a brush with soft edges and opacity of 15-20%, for the shadows we will use black for the light - highlight is yellow (#f0d464).

Let's start with the shadow, for this we will create a new layer above the black stripes that are located above the bottom ribbon strip. Next, we need to load the selection of the bottom strip so that when we create shadows, they do not go beyond the borders of the ribbon. To do this, press Ctrl+ click mouse over the layer of the lower shape of the ribbon, we should load the selection, go to the new shadow layer created and on it we will begin to apply strokes with a soft brush with black color in places where we should have a shadow.

And in conclusion, in the same way as the shadows, we apply light - a highlight on our St. George ribbon. One difference is that we create a layer not above the bottom strip of the tape, but above the top one.

On this, all the St. George ribbon has been created, the result can be seen below, I added a shadow under the ribbon background and an inscription.

I hope the lesson turned out to be understandable and you will not have any difficulties when creating it. If you have any questions, write in the comments.