When choosing interior paint, even for watercolor drawings, it is easy to make a mistake with the shade. Paper testers may not match the tone in reality.

Don't worry, there is a way to achieve the desired shade! Read on, what colors to mix to get Blue colour.

In contact with

Creating a classic shade

Unfortunately, which components were not mixed, without the primary tone itself, it will not even be possible to come close to creating the necessary shade. .

Red and yellow colors follow the same rule.

If the color in your palette is too dark, then white paint will help to lighten it by several tones.

If, on the contrary, it is necessary to darken the shade, then more dark tones should be added to the mixture - black, gray or brown.

Important! If you are mixing colors to create a small pattern in the interior, then you can mix them in a small bowl by hand. If you want to paint an entire wall, tint the ingredients in a bucket with a builder's mixer.

How to keep proportions

How to get blue when blended:

1. Get a delicate ultramarine by mixing the blue and white parts in a 3:1 ratio.
2. To create a shade with a slight blueness, increase the amount of white color. The ratio of blue to white is 2:1.
3. For a more transparent, light tone, stir them in equal proportions.

FROM advice! The sky color is perfect for painting a boy's nursery.

A turquoise tone will help to get a more intense heavenly tone.

A complex recipe of three ingredients will help create the color of the sea wave. How to make blue with turquoise and white? Take 2 parts blue paint, 1 part white and turquoise. Enjoy the sea blue.

It is interesting! Red, blue, yellow - are called primary, because by mixing other tones it will not be possible to achieve the desired shade. Why do you need to know what colors to mix to make blue? To achieve a play of shades and original textures, create artistic masterpieces.

dark shade

In the case when you want to make the color darker, the mixing recipe is a little more complicated. It all depends on what final result and how rich tone you are trying to achieve. How to successfully mix different tones to get a dark blue color:

1. You will need two colors: black and aquamarine. If the tone is made to decorate details, then stir the mass with a brush or stick in a small container. To paint the walls, it is necessary to tint the shade with a construction mixer, a special attachment for the grinder.
2. There are no exact proportions. Add black color to the base paint drop by drop or a few milliliters.
3. The resulting mixture is best tested on a sheet of white paper and allowed to dry. If the shade suits you, then stop tinting. If not, add even more black.

Advice! Darkened? Lighten the mass by several tones with white. Mix in gradually so you don't have to add black again.

Violet

Ultramarine is similar to artificial, which is not found in nature. Violet will help create a paint color of a dark sky. Magic coloring will help create an interesting tone that can be used to paint the ceiling in the nursery, and bright glowing star stickers will create an imitation of the night sky. How to get blue from purple:

1. mix blue paint with purple in proportions 3:1.
2. For the ceiling, knead the dye with a construction hook for about 10 minutes.
3. Test the finished mass on a small section of the wall. Do not forget that you need to apply interior color in 2-3 layers.

Favorite female shade is royal ultramarine.

To get such a noble tone on the verge of night blue and sea waves, you need an acid purple color scheme or pink. The recipe is similar to the previous tinting:

1. You will need 2 tones: acid violet (pink) and ultramarine.
2. The proportions of blue and pink are 3:1. Sometimes a little more pink is needed.
3. Evaluate the result by applying the dye to a small area.

Advice! To get purple, mix red and blue in equal proportions.

From yellow

To create an emerald blue color based on ultramarine, you need yellow. The resulting shade is similar to gloss precious stones. It is appropriate to use it for decorating small elements to get fantasy picture. How to get blue from yellow:

1. Mix yellow and ultramarine colors in equal proportions.
2. For a pastel look, add white. The proportion recipe depends on the desired degree of pallor.

Advice! To create a fantastic color with overflow, do not mix the paint thoroughly. lazy way tinting will create an interesting mother-of-pearl effect.

From green

Prussian blue is a favorite of not only interior designers, but also clothing.

Deep color is associated with the depths of the sea and a distant galaxy. How easy it is to get blue from green:

1. We combine two colors: aquamarine and green in equal proportions.
2. Mix using the technique for a uniform texture.

Surprisingly, when the third white ingredient is added, the color does not fade.

How to make the right shade of paint

What if there is no main color scheme, but you need to make blue paint? An interesting tone, similar to sapphire brilliance, is obtained by mixing red and green. Such tinting will not give a pure ultramarine, but with the addition of black and white paint, interesting and unusual shades can be achieved.

Useful video: how to mix colors

Combine combinations of warm shades with delicate pastels, blue tones with cold ones. Change the proportions to your liking, competent tinting is the key to a successful repair. Experiment and create your own colors!

How to get an orange color and its shades in 10 photos + a table of all possible derivatives. How to get coral, peach, terracotta and red colors? Influence of white, black and brown in color composition.
Orange color is obtained by mixing red and yellow, but you can get a shade of this color (soft and light enough) by adding pink to yellow paint. Subsequently, all the main saturated shades of orange are somehow associated with red, yellow, pink, white. More complex and darker tones are obtained with the participation of purple, brown and black.

How to get an orange color by mixing paints: red and yellow of the desired tone?

Everyone knows that the main orange gradient lies between red-orange and yellow-orange. Since the color is obtained or two colors, then, depending on the percentage of each colors goes shift in one direction or another.
Of course, all the resulting shades from the primary colors (in our case, red and yellow) will be paler. However, orange is made up of 2 warm tones, the waves of which are not very different (the opposite would be blue and yellow to create green), and even in the second order it looks quite catchy.

Mixing acrylic paints for painting:

How to get yellow-orange and red-orange?

It is believed that to get a classic orange, you need to take 1 part of yellow and 1 part of red. However, in practice it turns out that you have to take more yellow than red. In the palette, you can always choose the right tone by adding yellow or red to the mixture.

How to get a light orange color?

This tone has a wide range of pastel shades. They are built using white, but there are also Alternative option: mix pink and yellow, the resulting shade is a soft orange tone related to the light range:

Another option would be to add yellow and white.
Usually in a palette of 12 colors there is already an orange tint, which is much brighter than the color obtained by mixing, so when building shades, we will use the existing one.
There is a bright red-orange tone in my palette of glossy acrylic paints. To get light orange tones from it, I need to mix red-orange, yellow and white:

How to get coral color?

Although this shade is closer to pink, its construction is completely tied to orange color, and there are 2 scenarios for getting it:
1) Complicated: we take red-orange, pink and white in approximately equal parts (when you mix, adjust the shade by eye, the main thing is to mix the paint thoroughly).

2) Red-orange is close to scarlet, and scarlet is a shade of red. Red mixed with white gives pink, and coral can be called a light shade of pink with an orange undertone.

In this case, the coral will lean closer to orange, but still remain a luxurious tropical shade.

How to get peach color?

Another light and subtle shade of the base color. Peach belongs to the soft pastel scale., standing out from it with its sophistication, it has long been loved and entrenched in our imagination. Its construction consists of 4 colors:
1) Red+yellow+pink+white
2) Orange+yellow+pink+white
3) Coral + yellow + white

How to get terracotta color?

Let's move on to dark shades orange. One of interesting options- this is terracotta: a medium-dark, but rich complex red-orange hue is obtained by mixing purple and red-orange:

To make the shade lighter, adding a drop of white will help.

How to get red color?

The red color has an orange undertone. If you take brown and mix it with red-orange, the resulting shades will be dark, but saturated. You can adjust the tone by adding yellow.

How to get a dark orange color?

You can adjust the brightness of orange shades using black: either to completely darken it, or simply dim the brightness. This is necessary to create contrast.
If you want to dim light shades: mix white with black to a gray mass and bring it into the working tone.

Table for obtaining orange shades when mixing colors:

Practice in color science is indispensable, but theory can give you an understanding of how this or that tone is built.

In the center - the main color from which the color is built. The first circle of colors is the shades with which the color is mixed in the proportion indicated below. The third circle is formed by tones that are the result of mixing the primary color and the first circle in a smaller proportion than the third. On the sides of the color at the end of the beam, the same color with the addition of black (darker) and white (lighter).

How to get other colors and their shades: theory and practice. Click on the icon.

There are many reasons for looking for green. For example, you want to paint the kitchen, draw a landscape, or make leaves for a plant out of plasticine, and buy necessary material no possibility. Then you have to look for the answer to the question of how to get

Fundamentals of color

A science called coloristics studies colors, their features and combinations. Any artist, even a beginner, has an idea of ​​​​how to get one or another shade by mixing paints, and, of course, knows how to get a green color.

You may not believe it, but all the objects around you are painted in only 3 colors. They are called basic. These are red, yellow and blue. By mixing these colors and using black and white, you can create thousands of shades: brown, purple, pink, orange and many more. By learning these basics, future artists will also learn how to get green.

The color ring is used for visual study colorists. It is convenient to use it to determine which color to mix with which in order to get more complex shades. Moreover, changing the proportions of the original colors also changes the final one. Paints from different companies may vary slightly in color - this must also be taken into account when mixing.

What should be mixed?

We figured out that any color can be obtained by mixing red, blue and yellow. It remains only to figure out which colors to mix to get green. For the answer, let's turn to the color ring. It clearly shows that the color we need is between yellow and blue. So it is they who need to be mixed to get green. If you take paints in equal proportions, you get the usual color, which can be found in a jar labeled "green". But what happens if you change the amount of one of the colors?

Many shades

We have already talked about shades above, it remains to figure out what it is. Artists call colors that are very similar to the main one, but changed by adding other colors. Let's see how it looks in practice.

We have already figured out how to get green by mixing blue and yellow in equal proportions. If the proportions change, then the color will become different. For example, adding blue to green will make the second more "cold". This is the name of the shades that can be found on Adding yellow makes the color "warm", for example light green. What if yellow paint add a lot, get lemon.

How to change color correctly?

Often, artists face a more difficult task - how to get a green color that will be much more interesting than the standard one. To do this, you can experiment. For example, add black - it will make green more gloomy, similar to swamp or coniferous, but in some cases this is necessary. Black must be handled very carefully. Even the smallest drop can make the color muddy, so add it little by little. And white will make the shade lighter. In this case, the brightness will become less - green will be as if in a fog. The same recommendations apply to other colors.

In pursuit of interesting shades some begin to add all colors in a row to green. This is not worth doing. The colors on the other side can easily spoil everything. That is, if you mix yellow and blue, try not to add red and its shades to them. Only those who have sufficient skills in painting can do it correctly.

The psychology of green

Knowing how to get green can come in handy in many areas of life. But before you actively use it in the interior, decide whether it will suit you with psychological point vision.

Experts have long paid attention to the fact that furniture can greatly affect a person's mood. For example, red evokes passion or aggression, soft pink is suitable for a frivolous pastime, and orange adds energy and positive.

As for green, a lot depends on its brightness and saturation. More bright hues allow you to relax and have a good rest after a hard labor day, and juicy emerald shades or light green will give vivacity. At the same time, dark tones make the interior more serious. But all psychologists are inclined to one opinion - green is the most relaxing and calm color of all. If this is exactly what you need - actively use green in the interior.

How to get other colors?

Whatever your goals, you can hardly get by with one color. Green can be successfully combined with many other shades, because in nature the leaves of this particular color serve as a backdrop for irises, dandelions, forget-me-nots and poppies. Moreover, it all looks very harmonious. So green, if desired, can be successfully combined with any shades. But how do you get them?

Red, yellow and blue are the main ones, we found out above. They are complemented by black and white. And what colors can be obtained by mixing, a simple table will tell.

The article gives a complete and detailed answer to the question of how to get green by mixing paints. So now you can easily cope with this task and create many amazing shades that are not in your palette of colors.

Mixing colors is one of the most difficult procedures that a person who decides to make repairs on his own may face. The fact is that it is very important to know which colors to mix to create a certain tone. It should immediately be noted that it is better to purchase white paint and tint it in the store using a special machine, so the tone will be uniform. If you decide to do everything yourself, then you can find out how to mix colors correctly.

These materials are universal, they are used for many purposes: with their help, you can simply paint the walls, paint stained-glass windows, apply a picture on the wall and ceiling. In general, the scope of their use is limited to fantasy. The compositions are easy to use, well kept on the surface. But if you decide to paint a multi-component image on the wall, then buying paint of all the necessary colors will cost too much, and after completion of the work there will be a large number of unnecessary material. In this case, it is better to buy a base series, and to create certain shades, mix acrylic paints.

Basic color range

Since school bench everyone knows: when you combine yellow and red, you get orange, but if you add blue to the same yellow, you get green. It is on this principle that the table for mixing acrylic paints is built. According to her, it is enough to purchase only the main colors:

• white;
• black;
• red;
• brown;
• blue;
• yellow;
• pink.

You can just mix acrylic paints these tones to get the most existing shades.

Table Blending Basics

To properly mix materials, you can not do without a table. At first glance, working with it is easy: to get the desired result, just find the color and see what components are required. But the proportions are not indicated in the color mixing table, so it is necessary to gradually add tinting material to the main paint and apply the mixture to some unnecessary product: a sheet of plywood, drywall, and so on. Then you need to wait until the material dries. If the color matches the required, you can start working on the main surface.

Tinting technique

Now about how to get colors. By mixing acrylic materials, two main tones can be achieved: light and dark. Basic tones: earthy, green, orange, purple. To create a color, it is recommended to follow certain rules:

1. Light. In this case, titanium white is the main material, to which one or two tinting compositions are added. The less additional paintwork is used, the lighter the tone will come out. So you can make most shades of a light palette.
2. Dark. To form shades of this type, the opposite should be done. Before mixing colors, it is necessary to prepare the base tone, black dye is gradually introduced into the base. When working with black paint, you need to be careful, because it can make the color not dark, but dirty.
3. Green. This shade is not in the main palette, so you will need to mix yellow and blue. The exact ratio can only be known empirically.
4. Violet. This is a cool color that is obtained by mixing blue with pink or red. In some cases, you will also need to add black to darken the material.
5. Orange. To create this color, you need to mix red and yellow. For a more saturated orange, it is recommended to add more red and vice versa. If you want to create a soft color, for example, coral, then you need to lighten the material with white. Can dark colors be added? Yes, you can, but as a result of mixing paints, a dirty tone may result.
6. Earthy. Brown is the main color here. By adding various shades to it, they get a color from beige to dark wood.

Palette Rules

To get started, you will need a basic set of paints, brushes, a container of water and a palette (you can take any surface, including school supplies for drawing).

It is recommended to place white in the center, as they are used in creating most shades. Dyes of the main color range are placed in the recesses around (if any). You need to mix carefully, gradually adding tinting material and constantly checking the result. After mixing the colors, the brush should be rinsed in a container of water.

On a note! It is quite easy to work with acrylic resin materials using a table and a palette. The main thing is to practice more, each time the result will get better.

Oil paints

If you compare this material with watercolor or acrylic, then the oil is more fluid. Because of this, you need to mix the compositions of different colors very carefully. On the one hand, this is a disadvantage, but on the other hand, this feature allows you to get the following effects:

• Subject to thorough mixing, a uniform tone will be obtained. Such material is perfect for both full coloring of surfaces, and for partial decoration.
• If mixed partially, then multi-tone streaks will appear on the coating.

Mixing

Now how to mix oil paints. For mixing paint colors oil based table is also used. It indicates the colors obtained by combining various tinting components. In addition, here you can find such an indicator as a combination of brilliance. If you add a little gloss to a matte base, then there will be practically no result, and if you do the opposite, then the shine will be slightly muted.

Mixing methods:

1. Mechanical. In this case we are talking about mixing two or more materials of different colors in one container. Color saturation is controlled by the number of compounds bright colors. The desired color is created even before the wall or ceiling is processed.
2. Color overlay. Gradual application of several strokes on top of each other.
3. Optic. This is the most complex method, which is available only to specialists. It involves mixing glossy and matte bases while applying paint to the surface. You can mix the colors of paints only on the treated surface, otherwise you will get a more even tone.

Peculiarities

The first method fully corresponds to the data in the table. If we are talking about color overlay, then the result is unpredictable. One of the most simple options optical illusions is glazing: a dark tone is applied to the surface, after it dries, the paint is put a little lighter, and then completely light. As a result, each color will be visible through the upper layers.

Thus, there is no definite scheme. To find out which colors to mix, it is not enough just to take and look at the table, it is important to constantly practice and not be afraid of experiments. So you can create a new effect that will make the interior unique. It is also important to remember that a mixed shade is very difficult to repeat, so you should remember the proportions.

Now the question of how to properly mix paints does not seem so difficult.

The color mixing table allows you to find out how to get the right one when mixing two or more colors and shades.

This table is used in various fields art - fine arts, modeling, and others. It can also be used in construction when mixing paints and plasters.

Color mixing table 1

Color mixing table 2

Mixing paints
black= brown + blue + red in equal proportions
black= brown + blue.
gray and black\u003d blue, green, red and yellow are mixed in equal proportions, and then one or the other is added to the eye. it turns out you need more blue and red
black= you can mix red, blue and brown
black= red, green and blue. You can also add brown.
bodily= red and yellow paint .... just a little. After kneading, if it turns yellow, then add a little red, if it turns pink, a little yellow paint. If the color is very saturated, add a piece of white mastic and knead again
dark cherry= red + brown + some blue (cyan)
strawberry\u003d 3 parts pink + 1 hour red
Turkish\u003d 6 hours sky blue + 1 hour yellow
silver gray= 1 hour black + 1 hour blue
dark red= 1 hour red + a little black
rust color\u003d 8 hours orange + 2 hours red + 1 hour brown
greenish\u003d 9 hours sky blue + a little yellow
dark green= green + some black
lavender\u003d 5 hours pink + 1 hour lilac
bodily= a little copper color
nautical=5h blue + 1 hour green
peach=2h. orange + 1h. dark yellow
dark pink=2h. red + 1 hour brown
dark blue=1h. blue+1h Lilac
avocado= 4 hours yellow + 1 hour green + a little black
coral\u003d 3 hours pink + 2 hours yellow
gold\u003d 10 hours yellow + 3 hours orange + 1 hour red
plum = 1 hour purple + a little red
light green= 2 hours purple + 3 hours yellow

red + yellow = Orange
red + ocher + white = apricot
red + green = brown
red + blue = violet
red + blue + green = black
yellow + white + green = citric
yellow + cyan or blue = green
yellow + brown = ocher
yellow + green + white + red = tobacco
blue + green = sea ​​wave
orange + brown = terracotta
red + white = coffee with milk
brown + white + yellow = beige
light green=green+yellow, more yellow,+white= light green

lilac=blue+red+white, more red and white, +white= light lilac
lilac= red with blue, with red predominating
pistachio paint obtained by mixing yellow paint with a small amount of blue