Many children love to draw sports cars. Dynamic beautiful design and attractive streamlined body attracts the attention of every boy who dreams of getting behind the wheel of a racing car. But draw sports and racing cars not easy. It is very difficult to convey its dynamic shape of the hood and other details. However, the lessons step by step drawing make this task easier and step by step you can accurately draw a sports car and the drawing of the car will be similar to the original. In this lesson we will learn draw a sports car firms Lamborghini Aventador step by step.
1. Draw the contour of the body of a sports car
First you need to draw the initial contour of the body sports car. Start at the front of the car. Draw the contours of the windshield and bumper, and then apply the contours of the side part with light pencil strokes.
2. Details of the hood and bumper
Continue to draw the outline of the hood and with an arc emphasize the bulging wing of the sports car.
3. Headlights and wheels of a sports car
Now we will draw the headlights for our sports car. To do this, above the two front pentagons, draw two other polygons. In addition, you need to "insert" the wheels into the square cutouts of the mudguards and mark the center of the wheel with a dot.
4. "Ribs" of rigidity of the car body
At this stage, you need to add some additional lines along the body, the so-called stiffeners. Thanks to these "ribs", the thin metal does not deform when overloaded while the car is moving at high speed and rigidly holds the shape given at the factory. Make stiffeners in the middle of the hood and on the side of the car. Add some additional elements of the bumper and side of the body of the sports car.
5. How to draw wheels
Now we need to draw the wheels of a sports car, "refine" and correct preliminary circuit wheels. Blacken the tires with a pencil and draw a small circle in the middle of the wheel. After that, the square fender liner cutouts made on early stages, also need to be rounded, fitting the shape of the wheel. Next, from a rectangular roof, you need to make a streamlined part of the body of a sports car and add glass. Don't forget to draw the side mirrors.
6. The final stage of the drawing
At this step, the body of the sports car needs to be voluminous and give dynamics to the racing car. This can be done with soft simple pencil. But first, let's draw beautiful wheel rims. This is a fun activity because you can draw your own model sports car rims, like a star. Make branches from the center of the wheels a and paint over the voids between them. Then, with a pencil, you need to shade the glass, and the spaces in the bumper and on the side of the body. Add a Lamborghini Aventador badge to the hood. I hope you were able draw a sports car perfect. Now, if desired, you can make a small surrounding landscape and draw a road.
In this section, we will try to draw a crossover class car. A car in this class is much larger than its car counterparts and more like a sports car. Therefore, the wheels of this car are much larger and wider than those of cars.
The tank is one of the most complex military vehicles in terms of design. It is based on caterpillars, a hull and a turret with a cannon. The most difficult thing to draw in the tank is its caterpillar track. Modern tanks are very fast, of course, he will not catch up with a sports car, but a truck can.
Drawing an airplane is not so difficult. In order to draw an airplane, you only need to know some of the features of its structure. Military aircraft are different from passenger aircraft. They have a different, more dynamic shape, as there is no passenger compartment, only the cockpit.
If you color the helicopter drawing with colored pencils, the picture of the helicopter will be bright and attractive. Let's try to draw a helicopter in stages with a simple pencil.
Let's try to draw a hockey player in motion step by step, with a stick and a puck. You may even be able to draw your favorite hockey player or goalkeeper.
Step one. Let's do geometric shape box (I hope you know what it is). Let's write a typewriter into it. Step two. Let's outline the frame of the nine with light long strokes. 
Step three. Let's start drawing all the parts in more detail. 
Step four. Let's add shadows for realism, voila - even better than live: 
How to draw a truck with a pencil step by step
Step one. To begin with, we have to outline on paper the locations of the structural parts of the truck. With the help of straight lines sketch out such a frame. 
Step two. Let's start drawing the body, cab and wheels. 
Step three. Let's add details: glasses, mirrors, and other trifles. 
Step four. We will remove the auxiliary lines with the help of an eraser, add shading for realism. Here's what happened: 
How to draw a carriage with a pencil step by step
Step one. Let's outline the location of the objects with lines. 
Step two. Now let's sketch. Enter the necessary elements in each of the segments 
Step three. Outline the contours more clearly, even add shadows. 
Step four. Delete unnecessary lines and add hatching. It worked out pretty well: 
How to draw a sailboat with a pencil step by step
Step one. Sketch a few lines that vaguely resemble a ship. 
Step two. Designate the locations of the sails. 
Step three. Draw the hull and other structural parts of the ship. 
Step four. Next, we have to more accurately draw all the elements, outline the contours. 
Step five. Let's add hatching, shadows, draw waves from below. 
How to draw a Lamborghini with a pencil step by step
Step one. Draw a polygonal shape in which to place the car. 
Step two. We clearly distinguish the body with headlights and the hood. 
Step three. We complete the body of the car, add wheels, side mirrors and other details. 
Step four. Add hatching and remove extra lines.
How to draw Kamaz with a pencil step by step
Step one. Divide the paper into several square sectors representing different parts of the car. 
Step two. In the appropriate squares draw the wheels of the car, the body, the cargo compartment and the windshield. 
Step three. Sketch the front part first, apply the shadows, the license plate, draw the wheels and windshield. 
Step four. Do the same with the other half, sketch it with large hatching. 
Step five. Clean up the drawing and erase the extra lines with an eraser. 
Step six. Add hatching if necessary to make it look more realistic. Here's how it should turn out: 
How to draw Lada Priora with a pencil step by step
Step one. Draw the body of the car and the front wheels. 
Step two. Add headlights, rear wheels and other details. 
Step three. Outline everything with a thicker line. 
Step four. Shade and write instead of numbers Lada Priora. 
How to draw a fire truck with a pencil step by step
Step one. Let's start small, select the area for the drawing with a geometric figure, as in the figure below. 
Step two. We sculpt the shape of the car, add three wheels in circles. From above, with a short horizontal line, we will select a place for a water gun. 
Step three. Round the shapes, make softer transitions. Determine the centers of the wheels by drawing perpendicular lines. 
Step four. The main form is ready, now we just add all the accessories and elements: headlights, bumpers, doors, windows. 
Step five. Darken the bottom of the car, use short lines around the wheels to create the shape of the tires and finish adding various lotions. 
How to draw Boomer with a pencil step by step
Step one. Draw an oval circle. 
Step two. Carefully turn the drawn pseudo circle into a car body. straight lines select structural parts: doors, hood, roof. 
Step three. We make the shape more rounded and even, highlight the windshield and door windows. We also carefully draw two wheels. 
Step four. The main elements are ready, let's move on to the smaller details. Let's draw the headlights, bumper and side spoilers, side mirrors, don't forget the steering wheel. 
Step five. We draw tires, we create a shadow under the car, we easily hatch windows and a cowl.
How to draw a tractor with a pencil step by step
Step one
Place in the center of the sheet large figures and set the shape and position of our drawing. Here are two parallelepipeds - a tractor cabin, huge uneven circles - wheels, and behind a trapezoid.
step two
Let's outline the outline of the cabin and give it a shape. Large uneven circles should become large, massive twin wheels. Behind, inside the trapezoid, draw buckets.
Step Three
Let's draw the tractor cab. Let's draw the pipe and the front part. Let's circle the wheels. Let's pay attention to the bucket.
Step Four
Let's show what we can barely see inside the cabin. From above we will place all sorts of flashlights-dimensions. Carefully consider all the details on the body and try to transfer them to your sheet. Inside the wheel we see a disc.
Step five
Since we have a tractor, the tires have a high tread. Missing radiator grille and a few small things. OK it's all over Now! The tractor is ready! With what I congratulate you!
How to draw a sports car Audi S 5 Coupe
Step one.
Let's draw the body of a sports car.
Step two.
Let's denote the lines of the window, and the location of the wheels.
Step three.
Let's erase the auxiliary lines. Outline the contours of the Audi.
Step four.
Add doors and front bumper.
Step five.
Now the details. We draw door handles, a tank, rims, headlights and an Audi logo.
Step six.
It remains to darken the front of the car using hatching. Here is a drawing of a sports car:
How to draw a bicycle with a pencil step by step
Step one
First, let's show the outline of the bike, its main lines. That is, well, you and I should get two oval wheels connected by a frame, the basis for the seat and steering wheel.
step two
Circle the ovals-wheels, make them wider. We will show the rudder line as smooth. We circle the already existing basis for the seat, give it a shape. We draw another line down from the saddle, draw the front sprocket and pedals.
Step Three
Draw the thickness of the rubber. A fender is located above the rear wheel. Now let's turn to the frame and fork of the wheel. We will decorate the saddle, show the seatpost. Let's move on to the steering wheel: here are the handles and the steering column.
Step Four
Now let's pay attention to the details. We still do not have enough wheel rim with nipple. Further we draw cartridges on a back wheel and a chain. Draw holes on the star. Let's make the pedals voluminous. There are stripes on the bike handles. Draw a line on the saddle separating its sidewall.
Step five
There is very little left to reach the goal. Namely, a box for a chain and spokes for wheels. Now you know how to draw a bicycle with a pencil. Too bad you can't ride it. But you want to!
How to draw a bus with a pencil step by step
Step one.
We draw the base. She will serve us a huge parallelepiped, located in the very center of the sheet. That is, you need to remember a little geometry. By the way, if you remember about the "vanishing point" from the pro-room lesson, then this is very cool. Because this trick works with the top and bottom lines of our bus. And somewhere far, far away they intersect.
Step two.
We draw wheels. Remember important rule: those objects that are close seem large, those farther away seem small. And if you look at an angle, then the visual effect is such that you see the circle as an oval.
- either parallel to the base of the bus,
- either parallel vertical lines the bus itself
Step Three
We divide the resulting windows into sections. Perhaps there are already passengers sitting inside.
Let's add rectangular headlights to our drawing.
Step Four
We will make our drawing more voluminous and lively. For each line of the window, we will make a parallel. Inside the wheels we will show the disks.
Let's remember the details: these are the wipers, the rear-view mirrors, the door, and the turn signals. Ready:
How to draw a motorcycle step by step
Step one
The first thing to do is to draw the axial horizontal line for wheels. So we will immediately set the directions for our drawing. Now the wheels themselves. Let's outline the horizontal axes. The visual effect is such that we see them not quite round, but slightly elongated vertically. Moreover, the wheel closest to us is larger.
Above - the angular contour of the motorcycle.
Connect the visual of the ear with a horizontal line.
step two
Let's make the wheel closest to us voluminous. Let's show the width of the rubber of the rear wheel and its wide fork. On the motorcycle body itself, we will need to make a lot of straight reference lines, which we will need next. Look carefully at the picture and try to do the same.
Step Three
We continue to draw wide wheels. Above them are wide wings. Let's show the seat and front plumage.
Step Four
All the details of a two-wheeled friend need to be turned from angular into smooth and elegant. We carefully draw the details.
Step five
Outline the outline of the base, make it brighter. Here, our brainchild is already visible.
Step Six
There are a couple of barely noticeable inscriptions on the body. But we noticed them and draw them. Now you need to give a shadow to some details that are in depth, darkened. Well, it's done!
How to draw a car with a pencil step by step
So let's get started.
Step one.
We draw a contour. All lines are smooth and smooth. sharp corners minimum. We start drawing from the base, outline the top of the car, and then show the lines of the hood and windshield. More precisely, at this stage, these are auxiliary lines. We draw wheels: what is located closer to us is slightly more distant. 
Step two.
Now we need to draw the windshield. In doing so, we focus on the auxiliary lines drawn. Let's draw a rearview mirror. 
Step three.
From the hood we draw the side windows. At the same time, as it were, we will continue the line of the hood to the trunk, and then we will draw the windows themselves and show the side view mirror. We will draw a line along the side of the barrel, which will give relief to our car. Ahead, at the intersection of the auxiliary lines, we draw the radiator lining: several almost parallel lines, and on the crosspiece itself - the brand name of the manufacturing concern. Next, draw the headlights. At the same time, again, we rely on our auxiliary lines. 
Step four.
We draw the bottom, outline the bumper. Notice how we can see the wheels from under the wings. Show us the doors. Go ahead. 
Step five.
On the hood we will show the relief lines of the body. Let's draw the cross of the Merc badge. Let's draw handles at the doors. Now you need to draw a picture on the bumper. The drawing should not turn out flat, but voluminous. To do this, on the one hand, we seem to repeat the contour of the figure.
The last thing left. Here you need to try: wheel rims. Let's draw both the cross and the arches to show the wide tire and the voluminous rim. 
Step six.
We erase everything, all auxiliary lines! Well, the car is ready! You can circle! 
Step one.
Let's draw the main geometric figures, which will help us in the future. The first is an elongated ellipse. It is located not horizontally, but slightly at an angle. You need to position the figure closer to the left side of the sheet. We still have some room left. 
From the ellipse to the side we draw two lines - the axis of the tail of the aircraft. Inside the plane - axial long line. You can cheat and draw it on a ruler. Let's draw a small oval to our ellipse - the future turbine. So, the main defining parts are ready and we can move on.
Step two.
This step is more difficult than the first. As carefully as possible, starting from the turbine, we draw the contour line upwards, drawing the contour of the windshield. Next, draw the roof, which should be parallel to the axial long line. We are gradually approaching the tail section. Here we have to help the axis of the tail. Focusing on them, we need to draw a tail. 
Happened? Let's move on!
Step three.
We draw the second turbine of the engine, and then draw it in detail. Now we need to connect the body of the aircraft with a smooth line with the tail. From the body of the aircraft at the rear, we will show another feature, almost horizontal. 
Step four.
On the body of our aircraft we draw another long line parallel to the axial one. We continue draw an airplane step by step draw the details as shown in the picture. 
Step five.
Along the long line we draw: a windshield, a hatch for landing and for an emergency exit, portholes. 
Step six.
Now we erase the auxiliary lines. We take a soft pencil or a black felt-tip pen in our hands and draw a contour! 
Step seven.
Most final stage: coloring! Looks like our plane is ready to take off!
STEP 1. As in the previous lesson, first draw an elongated shape of the car. And also draw two lines, as shown in the figure, on which the windshield will be located later.
STEP 2. Next, we make sketches of the future shape of the car. We start with the extreme left wing, and then move on to the right. Draw the wheels, hood and windshield. Sketch out the headlights. And you can also roughly outline the location of the wheels using two lines, as shown in the figure.
STEP 3. Here we have to add a lot of details to the car. Let's start with the lower grille, spoiler and headlights. Then we move on to the trunk and wheels. You can draw rims on wheels the way you like best, or copy from our example.
STEP 4. We already have nice drawing cars, however, that's not all. It is necessary to add more details on the body and hood. Add some stripes also on the roof of the car, make ventilation holes. Draw a round shape for the tires.
STEP 5. It remains to add the finishing touches to drawing the car. Let's make rear-view mirrors, draw the headlights, and begin to apply a pattern to the tires. You can also add wipers.
STEP 6. We erase the extra lines with an eraser, and outline the residual contours of the car. Here's how you should do it.
STEP 1. The first step is pretty easy. All you have to do is make an elongated shape for the future car. It should look like an oblong box. It even reminds me of a guitar or a violin. Try to repeat exactly as shown in Figure 1.
But if you want, you can use a ruler to draw the windows of the car and round them out by hand later.
STEP 3. Start painting the glasses. Windshield first, passenger side window later. Some Barbie girl or famous singer Debbie Ryan may be sitting there. Next, draw the headlights.
STEP 4. On pencil drawing of a car we see the car from only one side, so we draw only one door and steps under the door. Add window frames. Don't forget to make a handle and a keyhole.
STEP 5. Moving on to the hood. Draw two lines on the hood and below the grille. Next, outline the lining for the spoiler and the bumper.
STEP 6. We are all set to go. It remains only to draw the wheels of the car. Please note that the wheels are not round! Under the weight of the machine, they flatten out a bit at the bottom. It will look more realistic. And of course, the tires are not perfectly round.
STEP 7. And finally, we carefully draw the rims. Try to repeat as in the picture, or you can draw your own version, so they can be different kind and shapes, for every taste and color.
STEP 8. We delete unnecessary auxiliary lines with the help of an eraser and outline the contours. Here's how we should be:
How to draw a train with a pencil step by step
Step one. With long drawn lines we will create a figure of a train in motion with a small chimney on top. 
Step two. Let's add a lot of wheels, headlights in front and other accessories of the locomotive. 
Step three. Carefully draw every detail, especially carefully look at the wheels. Let's remove the extra lines. 
Step four. Now we’ll draw everything well with a pencil, and most importantly, we’ll create a beautiful lush smoke that comes out of the chimney. 
How to draw a ferry with a pencil step by step
Step one. We draw the body of the ferry and the line of water with straight lines.
Step two. We add a deck to our ferry, all sorts of antennas and gadgets. We finish drawing the lines of the body so that they stand out more clearly.
Step three. Somewhere on the horizon we draw the earth, insert an exhaust pipe into our ferry, draw lines for the windows.
Step four. It remains only to finish the windows in the already marked places, make some adjustments to the structure of the ship and its appearance, and, voila, the ferry is afloat. Take the helm, captain, we are waiting long haul in the world of creativity!
Step five.
How to draw a helicopter with a pencil step by step
Step one. All lines are first drawn with a thin line. For this we can take hard pencil. Let's determine the position of the helicopter and the angle from which we will look.
We draw an oblique triangle - this is the contour that determines the future aircraft. Above the triangle is like a continuation of the sides, and above them is a curved line. This is the back of our helicopter. The corner looking at us is the front.
Step two. Starting from curved line, almost vertically upwards or at a slight angle, draw a construct on which the main rotor will be located.
Step three. The task is not easy: let's draw the outline of the helicopter around the main triangle. The upper corners, "ears", attached to the main device, will later turn into engine turbines.
Step four. And now we need to show the wings. We look at our main triangle: its farthest side from us is reference line. Mentally, but it is possible with a thin line, we draw a line parallel to it. And already on it are the wings of a helicopter. The wings will create additional lift, and this will increase the speed of flight. 
Step five. We draw turbines: large ones at the top and small ones under the wings. We carefully draw the nose of the helicopter at the corner of the triangle closest to us, and from below - the wheeled chassis. Step six. With thin, barely noticeable lines, we draw windows, contours and corners of the body.
Step seven. And now swung and draw a cruciform rotor. Step eight. Almost forgot about the tail. It is slightly visible due to the screw.
Step nine. Well, almost everything. The only thing left is to erase our reference triangle with the help of an eraser. And then with the help soft pencil outline the main large details. Coloring the helicopter is up to you. 
In this lesson, you will learn how to quickly draw a crossover class car, step by step with a pencil. A car of this class is slightly larger and heavier than other types of cars, so the wheels of this car are higher and wider than those of ordinary cars. For better off-road patency, this car has a high suspension, that is, there will be more clearance between the body and the ground. The modern streamlined design of the car body is not very easy to reflect in the drawing, so we will draw the car without additional design elements, only the base of the car body.
If you can right draw a car step by step with a pencil, you can then add additional design elements, such as an air intake and a spoiler, etc. A picture drawn with a pencil can be colored with colored pencils in the penultimate step of this lesson.
1. Draw a simple general outline of the car
draw a car not easy, so you need to make the correct preliminary markup general contour cars. To make this task easier, draw two parallel lines at a distance of 2.5 cm from each other. Divide these lines into two segments 6 and 8 cm. If you draw a car larger, on the entire sheet of paper, then increase these numbers proportionally. At the same stage of the drawing, next to straight lines, draw lines at an angle, and the first contour lines delete.
2. Draw the contours of the roof and wheels
Try to make exactly the same markings for the wheels as in my drawing. Notice the right front wheel is farther from the vertical edge of the contour than the left wheel. And the contours of the wheels themselves are not square, but rectangular. The contour of the roof of the car is easier to draw, however, try to make it as accurate as possible.
3. Begin to draw the shape of the car body
At first, it is better to draw the streamlined lines of the body shape along with the hood, and then proceed to draw the contours of the fender liner. Between the contours of the wheels, draw the lower part of the car body. Do not rush to draw everything at once, look carefully at car drawing one more time before moving on to the next step.
4. The shape of the body and wheels
Start this step by removing all extra contour lines from the drawing. After that start drawing the car wheels. You may not be able to draw perfect circles right away, so do not press hard on the pencil. Now start drawing body parts, glass, headlights. detailed instructions how draw a car it is impossible to give, just be careful.
5. Finishing touches in the drawing of the car
Wheels for a car are difficult to draw because they have to be perfectly round and uniform. But it's easy to draw disks. Any symmetrical figure, such as a star, is suitable for a disk pattern. When you draw the side windows of the car, do not forget to draw the side mirror. Draw the rest of the body parts at your discretion, the main thing is that you can correctly and symmetrically draw the shape of the body and wheels.
6. How to draw a car. final step
If your drawing of the car will be made in the technique of a simple pencil, then you need to shade the drawing. This will give the picture of the car a three-dimensional look, volume. But, probably, any car will look more beautiful if it is painted with colored pencils. Be sure to draw the road and the landscape surrounding the car, then your drawing of the car will be a real picture.
Sports cars have a more streamlined, dynamic design and a low seating position. In addition, they have low and wide car tires. This is necessary for greater stability on bends and better grip of the car with the road. Otherwise, the drawing of a sports car does not differ from the drawing of an ordinary passenger car.
The tank is one of the most complex military vehicles in terms of design. The most important thing in drawing a tank, as well as in drawing a car, is to draw its frame correctly.
Nowadays, it is rare to find wooden sailing ships. But even now they are the subject of many drawings. On our site there are many lessons in drawing technology, including cars. In this lesson we will learn how to draw a ship in stages.
Drawing an airplane is not so difficult, much easier than, for example, drawing a car. In order to draw an airplane, you only need to know some of the features of its structure. For example, military aircraft, unlike passenger aircraft, do not have a passenger cabin, but only a cockpit.
Let's try to draw a hockey player in motion step by step, with a stick and a puck. You may even be able to draw your favorite hockey player or goalkeeper.
Drawing a tram is best done against the backdrop of the urban landscape. draw road, cars, and if you wish, you can draw people entering the tram.
Another lesson on modern technologies. But this time, not a robot or a phone, but a car. You will learn easily and quickly. Personally, the whole process took me literally 10 minutes. Of course, this is not a perfect drawing, but you can work a lot more, adding a lot of details, thereby making the car very realistic. (Or vice versa) Before getting down to business, I must warn you. This is not the only car on our site. You can also draw:
- (which girls like);
And at the end of this article there will be links to 6 more cool cars that you can easily copy. So read to the end. Now let's start studying step by step lesson. STEP 1. The first step is pretty easy. All you have to do is make an elongated shape for the future one. It should look like an oblong box. Something like a guitar or a violin. Try to repeat exactly as shown in Figure 1.
STEP 2. Using this shape, we will gradually add details, and draw out the real body of the car. It's best to start with the roof and then move on to drawing the wheels and rear. Do not use rulers or auxiliary tools as the car has rounded shapes. And here everything is much easier than, for example, drawing a helicopter. But if you want, you can use a ruler to draw the windows of the car and round them out by hand later. 
STEP 3. Start painting the glasses. Windshield first, passenger side window later. Some Barbie girl might be sitting there or famous singer Debbie Ryan. Next, draw the headlights. 
STEP 4. On pencil drawing of a car we see the car from only one side, so we draw only one door and steps under the door. Add window frames. Don't forget to make a handle and a keyhole. STEP 5. Moving on to the hood. Draw two lines on the hood and below the grille. Next, outline the lining for the spoiler and the bumper. STEP 6. We are all set to go. It remains only to draw the wheels of the car. Please note that the wheels are not round! Under the weight of the machine, they flatten out a bit at the bottom. It will look more realistic. And of course, the tires are not perfectly round. 
STEP 7. And finally, we carefully draw the rims. Try to repeat as in the picture, or you can draw your own version, so they can be of different types and shapes, for every taste and color. STEP 8. We delete unnecessary auxiliary lines with the help of an eraser and outline the contours. Here's how we should be: Here, I hope you will already know about. And here is how Roma Burlai drew it: 
Do you still want to see car pencil drawings? Write about it in the comments! Of course, they know how to draw a car experienced artists. For beginners, understanding how to draw a car correctly is by no means easy, because a car is a very complex vehicle. Therefore, in order to learn how to draw cars, you can not only make sketches from life, but also copy from high-quality photographs. If it is difficult to draw straight lines, then you can use a ruler as an auxiliary tool. In general, before drawing a car, you should prepare:
1). Liner;
2). Pencil;
3). Pencils of various tones;
4). Eraser;
5). Landscape leaflet.
It will be easier to figure out how to draw a car with a pencil if the process of working on this kind of image is divided into separate stages:
1. Draw the car body without going into details;
2. Draw the wheels on the car. Draw the wheels on the left more accurately, and the wheels on the right should be barely visible;
3. Draw the doors. Picture various small parts such as bumper, rearview mirror and headlights;
4. Now you know how to draw a car with a pencil step by step. To make the image clearer, circle it with a liner;
5. Using an eraser, erase the pencil sketch of the car;
6. Color the wheels and small details with gray and dark brown pencils;
7. in pink color the emblem. With a blue-green pencil, paint over the body of the car;
8. Paint over the car door handles in swamp green. Dark green paint the stripes on the car doors and shade small details a little;
9. Color the headlights of the car with yellow and orange pencils. Lightly shade the windows of the car with a blue tint.
The drawing of the passenger car is now ready. Having learned how to draw a car in stages, you can pretty quickly learn how to draw a car of almost any model, be it a foreign Mercedes or a domestic fret. It is not at all necessary to color the drawing of the car with colored pencils, you can limit yourself to shading made with the most ordinary sharpened pencil. Also, the car can be painted with paints, for example, bright gouache or watercolor is ideal for this purpose. Young children will surely enjoy decorating the drawn car with felt-tip pens, which have very rich and varied shades.
